# Objective
I was lurking and noticed that some links to the Bevy website were not
updated in newer code (`bevyengine.org` -> `bevy.org`).
## Solution
- Look for `bevyengine.org` occurrences in the current code, replace
them with `bevy.org`.
## Testing
- Did you test these changes? If so, how? I visited the Bevy website!
- Are there any parts that need more testing?
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
## Longer term
- Maybe add a lint to flag references to the old website but I don't
know how to do that. But not sure it's needed as the more time will pass
the less it will be relevant.
# Objective
Contributes to #18238
Updates the `log_layers_ecs`, example to use the `children!` macro.
Note that I did not use a macro, nor `Children::spawn` for the outer
layer. Since the `EventReader` is borrowed mutably, any `.map` I did on
`events.read()` was going to have the reference outlive the function
body. I believe this scope of change is correct for the PR.
## Solution
Updates examples to use the Improved Spawning API merged in
https://github.com/bevyengine/bevy/pull/17521
## Testing
- Did you test these changes? If so, how?
- Opened the examples before and after and verified the same behavior
was observed. I did this on Ubuntu 24.04.2 LTS using `--features
wayland`.
- Are there any parts that need more testing?
- Other OS's and features can't hurt, but this is such a small change it
shouldn't be a problem.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Run the examples yourself with and without these changes.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- see above
---
## Showcase
n/a
## Migration Guide
n/a
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- A step towards #19024.
- `AnimationGraph` can serialize raw `AssetId`s. However for normal
handles, this is a runtime ID. This means it is unlikely that the
`AssetId` will correspond to the same asset after deserializing -
effectively breaking the graph.
## Solution
- Stop allowing `AssetId` to be serialized by `AnimationGraph`.
Serializing a handle with no path is now an error.
- Add `MigrationSerializedAnimationClip`. This is an untagged enum for
serde, meaning that it will take the first variant that deserializes. So
it will first try the "modern" version, then it will fallback to the
legacy version.
- Add some logging/error messages to explain what users should do.
Note: one limitation here is that this removes the ability to serialize
and deserialize UUIDs. In theory, someone could be using this to have a
"default" animation. If someone inserts an empty `AnimationClip` into
the `Handle::default()`, this **might** produce a T-pose. It might also
do nothing though. Unclear! I think this is worth the risk for
simplicity as it seems unlikely that people are sticking UUIDs in here
(or that you want a default animation in **any** AnimationGraph).
## Testing
- Ran `cargo r --example animation_graph -- --save` on main, then ran
`cargo r --example animation_graph` on this PR. The PR was able to load
the old data (after #19631).
# Objective
add support for light textures (also known as light cookies, light
functions, and light projectors)
## Solution
- add components:
```rs
/// Add to a [`PointLight`] to add a light texture effect.
/// A texture mask is applied to the light source to modulate its intensity,
/// simulating patterns like window shadows, gobo/cookie effects, or soft falloffs.
pub struct PointLightTexture {
/// The texture image. Only the R channel is read.
pub image: Handle<Image>,
/// The cubemap layout. The image should be a packed cubemap in one of the formats described by the [`CubemapLayout`] enum.
pub cubemap_layout: CubemapLayout,
}
/// Add to a [`SpotLight`] to add a light texture effect.
/// A texture mask is applied to the light source to modulate its intensity,
/// simulating patterns like window shadows, gobo/cookie effects, or soft falloffs.
pub struct SpotLightTexture {
/// The texture image. Only the R channel is read.
/// Note the border of the image should be entirely black to avoid leaking light.
pub image: Handle<Image>,
}
/// Add to a [`DirectionalLight`] to add a light texture effect.
/// A texture mask is applied to the light source to modulate its intensity,
/// simulating patterns like window shadows, gobo/cookie effects, or soft falloffs.
pub struct DirectionalLightTexture {
/// The texture image. Only the R channel is read.
pub image: Handle<Image>,
/// Whether to tile the image infinitely, or use only a single tile centered at the light's translation
pub tiled: bool,
}
```
- store images to the `RenderClusteredDecals` buffer
- read the image and modulate the lights
- add `light_textures` example to showcase the new features
## Testing
see light_textures example
# Objective
When dragging the slider thumb the thumb is only highlighted while the
pointer is hovering the widget. If the pointer moves off the widget
during a drag the thumb reverts to its normal unhovered colour.
## Solution
Query for `CoreSliderDragState` in the slider update systems and set the
lighter color if the thumb is dragged or hovered.
# Objective
This PR introduces Bevy Feathers, an opinionated widget toolkit and
theming system intended for use by the Bevy Editor, World Inspector, and
other tools.
The `bevy_feathers` crate is incomplete and hidden behind an
experimental feature flag. The API is going to change significantly
before release.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Closes#18075
In order to enable a number of patterns for dynamic materials in the
engine, it's necessary to decouple the renderer from the `Material`
trait.
This opens the possibility for:
- Materials that aren't coupled to `AsBindGroup`.
- 2d using the underlying 3d bindless infrastructure.
- Dynamic materials that can change their layout at runtime.
- Materials that aren't even backed by a Rust struct at all.
## Solution
In short, remove all trait bounds from render world material systems and
resources. This means moving a bunch of stuff onto `MaterialProperties`
and engaging in some hacks to make specialization work. Rather than
storing the bind group data in `MaterialBindGroupAllocator`, right now
we're storing it in a closure on `MaterialProperties`. TBD if this has
bad performance characteristics.
## Benchmarks
- `many_cubes`:
`cargo run --example many_cubes --release --features=bevy/trace_tracy --
--vary-material-data-per-instance`:
- @DGriffin91's Caldera
`cargo run --release --features=bevy/trace_tracy -- --random-materials`
- @DGriffin91's Caldera with 20 unique material types (i.e.
`MaterialPlugin<M>`) and random materials per mesh
`cargo run --release --features=bevy/trace_tracy -- --random-materials`
### TODO
- We almost certainly lost some parallelization from removing the type
params that could be gained back from smarter iteration.
- Test all the things that could have broken.
- ~Fix meshlets~
## Showcase
See [the
example](https://github.com/bevyengine/bevy/pull/19667/files#diff-9d768cfe1c3aa81eff365d250d3cbe5a63e8df63e81dd85f64c3c3cd993f6d94)
for a custom material implemented without the use of the `Material`
trait and thus `AsBindGroup`.
---------
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
Co-authored-by: IceSentry <c.giguere42@gmail.com>
# Objective
Upgrade to `wgpu` version `25.0`.
Depends on https://github.com/bevyengine/naga_oil/pull/121
## Solution
### Problem
The biggest issue we face upgrading is the following requirement:
> To facilitate this change, there was an additional validation rule put
in place: if there is a binding array in a bind group, you may not use
dynamic offset buffers or uniform buffers in that bind group. This
requirement comes from vulkan rules on UpdateAfterBind descriptors.
This is a major difficulty for us, as there are a number of binding
arrays that are used in the view bind group. Note, this requirement does
not affect merely uniform buffors that use dynamic offset but the use of
*any* uniform in a bind group that also has a binding array.
### Attempted fixes
The easiest fix would be to change uniforms to be storage buffers
whenever binding arrays are in use:
```wgsl
#ifdef BINDING_ARRAYS_ARE_USED
@group(0) @binding(0) var<uniform> view: View;
@group(0) @binding(1) var<uniform> lights: types::Lights;
#else
@group(0) @binding(0) var<storage> view: array<View>;
@group(0) @binding(1) var<storage> lights: array<types::Lights>;
#endif
```
This requires passing the view index to the shader so that we know where
to index into the buffer:
```wgsl
struct PushConstants {
view_index: u32,
}
var<push_constant> push_constants: PushConstants;
```
Using push constants is no problem because binding arrays are only
usable on native anyway.
However, this greatly complicates the ability to access `view` in
shaders. For example:
```wgsl
#ifdef BINDING_ARRAYS_ARE_USED
mesh_view_bindings::view.view_from_world[0].z
#else
mesh_view_bindings::view[mesh_view_bindings::view_index].view_from_world[0].z
#endif
```
Using this approach would work but would have the effect of polluting
our shaders with ifdef spam basically *everywhere*.
Why not use a function? Unfortunately, the following is not valid wgsl
as it returns a binding directly from a function in the uniform path.
```wgsl
fn get_view() -> View {
#if BINDING_ARRAYS_ARE_USED
let view_index = push_constants.view_index;
let view = views[view_index];
#endif
return view;
}
```
This also poses problems for things like lights where we want to return
a ptr to the light data. Returning ptrs from wgsl functions isn't
allowed even if both bindings were buffers.
The next attempt was to simply use indexed buffers everywhere, in both
the binding array and non binding array path. This would be viable if
push constants were available everywhere to pass the view index, but
unfortunately they are not available on webgpu. This means either
passing the view index in a storage buffer (not ideal for such a small
amount of state) or using push constants sometimes and uniform buffers
only on webgpu. However, this kind of conditional layout infects
absolutely everything.
Even if we were to accept just using storage buffer for the view index,
there's also the additional problem that some dynamic offsets aren't
actually per-view but per-use of a setting on a camera, which would
require passing that uniform data on *every* camera regardless of
whether that rendering feature is being used, which is also gross.
As such, although it's gross, the simplest solution just to bump binding
arrays into `@group(1)` and all other bindings up one bind group. This
should still bring us under the device limit of 4 for most users.
### Next steps / looking towards the future
I'd like to avoid needing split our view bind group into multiple parts.
In the future, if `wgpu` were to add `@builtin(draw_index)`, we could
build a list of draw state in gpu processing and avoid the need for any
kind of state change at all (see
https://github.com/gfx-rs/wgpu/issues/6823). This would also provide
significantly more flexibility to handle things like offsets into other
arrays that may not be per-view.
### Testing
Tested a number of examples, there are probably more that are still
broken.
---------
Co-authored-by: François Mockers <mockersf@gmail.com>
Co-authored-by: Elabajaba <Elabajaba@users.noreply.github.com>
# Objective
- Related to #19024.
## Solution
- Remove the `FULLSCREEN_SHADER_HANDLE` `weak_handle` with a resource
holding the shader handle.
- This also changes us from using `load_internal_asset` to
`embedded_asset`/`load_embedded_asset`.
- All uses have been migrated to clone the `FullscreenShader` resource
and use its `to_vertex_state` method.
## Testing
- `anti_aliasing` example still works.
- `bloom_3d` example still works.
---------
Co-authored-by: charlotte 🌸 <charlotte.c.mcelwain@gmail.com>
# Objective
An attempt to start building a base for first-party tilemaps (#13782).
The objective is to create a very simple tilemap chunk rendering plugin
that can be used as a building block for 3rd-party tilemap crates, and
eventually a first-party tilemap implementation.
## Solution
- Introduces two user-facing components, `TilemapChunk` and
`TilemapChunkIndices`, and a new material `TilemapChunkMaterial`.
- `TilemapChunk` holds the chunk and tile sizes, and the tileset image
- The tileset image is expected to be a layered image for use with
`texture_2d_array`, with the assumption that atlases or multiple images
would go through an asset loader/processor. Not sure if that should be
part of this PR or not..
- `TilemapChunkIndices` holds a 1d representation of all of the tile's
Option<u32> index into the tileset image.
- Indices are fixed to the size of tiles in a chunk (though maybe this
should just be an assertion instead?)
- Indices are cloned and sent to the shader through a u32 texture.
## Testing
- Initial testing done with the `tilemap_chunk` example, though I need
to include some way to update indices as part of it.
- Tested wasm with webgl2 and webgpu
- I'm thinking it would probably be good to do some basic perf testing.
---
## Showcase
```rust
let chunk_size = UVec2::splat(64);
let tile_size = UVec2::splat(16);
let indices: Vec<Option<u32>> = (0..chunk_size.x * chunk_size.y)
.map(|_| rng.gen_range(0..5))
.map(|i| if i == 0 { None } else { Some(i - 1) })
.collect();
commands.spawn((
TilemapChunk {
chunk_size,
tile_size,
tileset,
},
TilemapChunkIndices(indices),
));
```
This is a bit of a test case in writing the
[explanation](https://bevyengine.org/learn/contribute/helping-out/explaining-examples/)
for an example whose subject (`DistanceFog` as a component on cameras)
is the focus, but isn't that complicated either. Not certain if this
could be an exception or something more common.
Putting the controls below the explanation, as they're more of a
fall-back for the on-screen info (also that's where they were before).
# Objective
- Start the realtime direct lighting work for bevy solari
## Solution
- Setup all the CPU-side code for the realtime lighting path (minus some
parts for the temporal reuse I haven't written yet)
- Implement RIS with 32 samples to choose a good random light
- Don't sample a disk for the directional light, just treat it as a
single point. This is faster and not much worse quality.
## Future
- Spatiotemporal reuse (ReSTIR DI)
- Denoiser (DLSS-RR)
- Light tile optimization for faster light selection
- Indirect lighting (ReSTIR GI)
## Testing
- Run the solari example to see realtime
- Run the solari example with `-- --pathtracer` to see the existing
pathtracer
---
## Showcase
1 frame direct lighting:
Accumulated pathtracer output:
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fix https://github.com/bevyengine/bevy/issues/19617
# Solution
Add newlines before all impl blocks.
I suspect that at least some of these will be objectionable! If there's
a desired Bevy style for this then I'll update the PR. If not then we
can just close it - it's the work of a single find and replace.
Click to focus is now a global observer.
# Objective
Previously, the "click to focus" behavior was implemented in each
individual headless widget, producing redundant logic.
## Solution
The new scheme is to have a global observer which looks for pointer down
events and triggers an `AcquireFocus` event on the target. This event
bubbles until it finds an entity with `TabIndex`, and then focuses it.
## Testing
Tested the changes using the various examples that have focusable
widgets. (This will become easier to test when I add focus ring support
to the examples, but that's for another day. For now you just have to
know which keys to press.)
## Migration
This change is backwards-compatible. People who want the new behavior
will need to install the new plugin.
# Objective
- Fix#19759
- The bigger permutation table only comes into play for higher
dimensions than 1, when you start doing
`PERMUTATION_TABLE[PERMUTATION_TABLE[index] + some_number]`
- The bigger permutation table has no mathematical meaning, it's just
there to avoid having to write more `& 0xFF` when doing multiple nested
lookups in higher dimensions
- But we only use 1D Perlin noise for the camera shake because we want
the dimensions to be uncorrelated
## Solution
- So, we can trim the permutation table down :)
- This should be mathematically identical, as a wrapped value will still
access the same element as an unwrapped value would in the bigger table
- The comment was a bit misleading anyways. "mirror" did not refer to
"mirrored values" but to "repeated values".
## Testing
- Ran the example. Still behaves like before.
# Objective
Add support for interpolation in OKLab and OKLCH color spaces for UI
gradients.
## Solution
* New `InterpolationColorSpace` enum with `OkLab`, `OkLch`, `OkLchLong`,
`Srgb` and `LinearRgb` variants.
* Added a color space specialization to the gradients pipeline.
* Added support for interpolation in OkLCH and OkLAB color spaces to the
gradients shader. OKLCH interpolation supports both short and long hue
paths. This is mostly based on the conversion functions from
`bevy_color` except that interpolation in polar space uses radians.
* Added `color_space` fields to each gradient type.
## Testing
The `gradients` example has been updated to demonstrate the different
color interpolation methods.
Press space to cycle through the different options.
---
## Showcase
# Objective
There were 2 folders inside of `examples`, each with 1 example, and with
similar folder names.
## Solution
Move the example in the `usages` folder to `usage`.
## Testing
`cargo run -p ci`
# Objective
- Alternative to #19721
- The old implementation had several issues:
- underexplained
- bit complicated in places
- did not follow the source as described
- camera moves away
- camera does not use noise
- camera nudges back after shake ends, which looks cinematic, but not
what you want in practice
All in all: the old implementation did not really show a typical
implementation IMO
## Solution
- Rewrite it :D
- I believe the current implementation is a robust thing you can learn
from or just copy-paste into your project
## Testing
https://github.com/user-attachments/assets/bfe74fb6-c428-4d5a-9c9c-cd4a034ba176
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
This is part of the "core widgets" effort:
https://github.com/bevyengine/bevy/issues/19236.
## Solution
This adds the "core checkbox" widget type.
## Testing
Tested using examples core_widgets and core_widgets_observers.
Note to reviewers: I reorganized the code in the examples, so the diffs
are large because of code moves.
# Objective
- Many strings in bevy_ecs are created but only used for debug: system
name, component name, ...
- Those strings make a significant part of the final binary and are no
use in a released game
## Solution
- Use [`strings`](https://linux.die.net/man/1/strings) to find ...
strings in a binary
- Try to find where they come from
- Many are made from `type_name::<T>()` and only used in error / debug
messages
- Add a new structure `DebugName` that holds no value if `debug` feature
is disabled
- Replace `core::any::type_name::<T>()` by `DebugName::type_name::<T>()`
## Testing
Measurements were taken without the new feature being enabled by
default, to help with commands
### File Size
I tried building the `breakout` example with `cargo run --release
--example breakout`
|`debug` enabled|`debug` disabled|
|-|-|
|81621776 B|77735728B|
|77.84MB|74.13MB|
### Compilation time
`hyperfine --min-runs 15 --prepare "cargo clean && sleep 5"
'RUSTC_WRAPPER="" cargo build --release --example breakout'
'RUSTC_WRAPPER="" cargo build --release --example breakout --features
debug'`
```
breakout' 'RUSTC_WRAPPER="" cargo build --release --example breakout --features debug'
Benchmark 1: RUSTC_WRAPPER="" cargo build --release --example breakout
Time (mean ± σ): 84.856 s ± 3.565 s [User: 1093.817 s, System: 32.547 s]
Range (min … max): 78.038 s … 89.214 s 15 runs
Benchmark 2: RUSTC_WRAPPER="" cargo build --release --example breakout --features debug
Time (mean ± σ): 92.303 s ± 2.466 s [User: 1193.443 s, System: 33.803 s]
Range (min … max): 90.619 s … 99.684 s 15 runs
Summary
RUSTC_WRAPPER="" cargo build --release --example breakout ran
1.09 ± 0.05 times faster than RUSTC_WRAPPER="" cargo build --release --example breakout --features debug
```
# Objective
While `KeyCode` is very often the correct way to interact with keyboard
input there are a bunch of cases where it isn't, notably most of the
symbols (e.g. plus, minus, different parentheses). Currently the only
way to get these is to read from `EventReader<KeyboardInput>`, but then
you'd have to redo the `ButtonInput` logic for pressed/released to e.g.
make zoom functionality that depends on plus/minus keys.
This has led to confusion previously, like
https://github.com/bevyengine/bevy/issues/3278
## Solution
Add a `ButtonInput<Key>` resource.
## Testing
Modified the `keyboard_input` example to test it.
## Open questions
I'm not 100% sure this is the right way forward, since it duplicates the
key processing logic and might make people use the shorter
`ButtonInput<Key>` even when it's not appropriate.
Another option is to add a new struct with both `Key` and `KeyCode`, and
use `ButtonInput` with that instead. That would make it more
explanatory, but that is a lot of churn.
The third alternative is to not do this because it's too niche.
I'll add more documentation and take it out of draft if we want to move
forward with it.
# Objective
- Fixes#19627
- Tackles part of #19644
- Supersedes #19629
- `Window` has become a very very very big component
- As such, our change detection does not *really* work on it, as e.g.
moving the mouse will cause a change for the entire window
- We circumvented this with a cache
- But, some things *shouldn't* be cached as they can be changed from
outside the user's control, notably the cursor grab mode on web
- So, we need to disable the cache for that
- But because change detection is broken, that would result in the
cursor grab mode being set every frame the mouse is moved
- That is usually *not* what a dev wants, as it forces the cursor to be
locked even when the end-user is trying to free the cursor on the
browser
- the cache in this situation is invalid due to #8949
## Solution
- Split `Window` into multiple components, each with working change
detection
- Disable caching of the cursor grab mode
- This will only attempt to force the grab mode when the `CursorOptions`
were touched by the user, which is *much* rarer than simply moving the
mouse.
- If this PR is merged, I'll do the exact same for the other
constituents of `Window` as a follow-up
## Testing
- Ran all the changed examples
# Objective
Current way to wire `Layer`s together using `layer.with(new_layer)` in
the `bevy_log` plugin is brittle and not flexible. As #17722
demonstrated, the current solution makes it very hard to do any kind of
advanced wiring, as the type system of `tracing::Subscriber` gets in the
way very quickly (the type of each new layer depends on the type of the
previous ones). We want to make it easier to have more complex wiring of
`Layers`. It would be hard to solve #19085 without it
## Solution
It aims to be functionally equivalent.
- Replace of using `layer.with(new_layer)` . We now add `layer.boxed()`
to a `Vec<BoxedLayer>`. It is a solution recommended by
`tracing_subscriber::Layer` for complex wiring cases (See
https://docs.rs/tracing-subscriber/latest/tracing_subscriber/layer/index.html#runtime-configuration-with-layers)
- Do some refactoring and clean up that is now enabled by the new
solution
## Testing
- Ran CI locally on Linux
- Ran the logs examples
- Need people familiar with the features `trace`, `tracing-chrome`,
`tracing-tracy` to check that it still works as expected
- Need people with access to `ios`, `android` and `wasm` to check it as
well.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
Improve the performance of `FilteredEntity(Ref|Mut)` and
`Entity(Ref|Mut)Except`.
`FilteredEntityRef` needs an `Access<ComponentId>` to determine what
components it can access. There is one stored in the query state, but
query items cannot borrow from the state, so it has to `clone()` the
access for each row. Cloning the access involves memory allocations and
can be expensive.
## Solution
Let query items borrow from their query state.
Add an `'s` lifetime to `WorldQuery::Item` and `WorldQuery::Fetch`,
similar to the one in `SystemParam`, and provide `&'s Self::State` to
the fetch so that it can borrow from the state.
Unfortunately, there are a few cases where we currently return query
items from temporary query states: the sorted iteration methods create a
temporary state to query the sort keys, and the
`EntityRef::components<Q>()` methods create a temporary state for their
query.
To allow these to continue to work with most `QueryData`
implementations, introduce a new subtrait `ReleaseStateQueryData` that
converts a `QueryItem<'w, 's>` to `QueryItem<'w, 'static>`, and is
implemented for everything except `FilteredEntity(Ref|Mut)` and
`Entity(Ref|Mut)Except`.
`#[derive(QueryData)]` will generate `ReleaseStateQueryData`
implementations that apply when all of the subqueries implement
`ReleaseStateQueryData`.
This PR does not actually change the implementation of
`FilteredEntity(Ref|Mut)` or `Entity(Ref|Mut)Except`! That will be done
as a follow-up PR so that the changes are easier to review. I have
pushed the changes as chescock/bevy#5.
## Testing
I ran performance traces of many_foxes, both against main and against
chescock/bevy#5, both including #15282. These changes do appear to make
generalized animation a bit faster:
(Red is main, yellow is chescock/bevy#5)
## Migration Guide
The `WorldQuery::Item` and `WorldQuery::Fetch` associated types and the
`QueryItem` and `ROQueryItem` type aliases now have an additional
lifetime parameter corresponding to the `'s` lifetime in `Query`. Manual
implementations of `WorldQuery` will need to update the method
signatures to include the new lifetimes. Other uses of the types will
need to be updated to include a lifetime parameter, although it can
usually be passed as `'_`. In particular, `ROQueryItem` is used when
implementing `RenderCommand`.
Before:
```rust
fn render<'w>(
item: &P,
view: ROQueryItem<'w, Self::ViewQuery>,
entity: Option<ROQueryItem<'w, Self::ItemQuery>>,
param: SystemParamItem<'w, '_, Self::Param>,
pass: &mut TrackedRenderPass<'w>,
) -> RenderCommandResult;
```
After:
```rust
fn render<'w>(
item: &P,
view: ROQueryItem<'w, '_, Self::ViewQuery>,
entity: Option<ROQueryItem<'w, '_, Self::ItemQuery>>,
param: SystemParamItem<'w, '_, Self::Param>,
pass: &mut TrackedRenderPass<'w>,
) -> RenderCommandResult;
```
---
Methods on `QueryState` that take `&mut self` may now result in
conflicting borrows if the query items capture the lifetime of the
mutable reference. This affects `get()`, `iter()`, and others. To fix
the errors, first call `QueryState::update_archetypes()`, and then
replace a call `state.foo(world, param)` with
`state.query_manual(world).foo_inner(param)`. Alternately, you may be
able to restructure the code to call `state.query(world)` once and then
make multiple calls using the `Query`.
Before:
```rust
let mut state: QueryState<_, _> = ...;
let d1 = state.get(world, e1);
let d2 = state.get(world, e2); // Error: cannot borrow `state` as mutable more than once at a time
println!("{d1:?}");
println!("{d2:?}");
```
After:
```rust
let mut state: QueryState<_, _> = ...;
state.update_archetypes(world);
let d1 = state.get_manual(world, e1);
let d2 = state.get_manual(world, e2);
// OR
state.update_archetypes(world);
let d1 = state.query(world).get_inner(e1);
let d2 = state.query(world).get_inner(e2);
// OR
let query = state.query(world);
let d1 = query.get_inner(e1);
let d1 = query.get_inner(e2);
println!("{d1:?}");
println!("{d2:?}");
```
# Objective
Getting access to the original target of an entity-event is really
helpful when working with bubbled / propagated events.
`bevy_picking` special-cases this, but users have requested this for all
sorts of bubbled events.
The existing naming convention was also very confusing. Fixes
https://github.com/bevyengine/bevy/issues/17112, but also see #18982.
## Solution
1. Rename `ObserverTrigger::target` -> `current_target`.
1. Store `original_target: Option<Entity>` in `ObserverTrigger`.
1. Wire it up so this field gets set correctly.
1. Remove the `target` field on the `Pointer` events from
`bevy_picking`.
Closes https://github.com/bevyengine/bevy/pull/18710, which attempted
the same thing. Thanks @emfax!
## Testing
I've modified an existing test to check that the entities returned
during event bubbling / propagation are correct.
## Notes to reviewers
It's a little weird / sad that you can no longer access this infromation
via the buffered events for `Pointer`. That said, you already couldn't
access any bubbled target. We should probably remove the `BufferedEvent`
form of `Pointer` to reduce confusion and overhead, but I didn't want to
do so here.
Observer events can be trivially converted into buffered events (write
an observer with an EventWriter), and I suspect that that is the better
migration if you want the controllable timing or performance
characteristics of buffered events for your specific use case.
## Future work
It would be nice to not store this data at all (and not expose any
methods) if propagation was disabled. That involves more trait
shuffling, and I don't think we should do it here for reviewability.
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
As someone who is currently learning Bevy, I found the implementation of
the ambient light in the 3d/lighting.rs example unsatisfactory.
## Solution
- I adjusted the brightness of the ambient light in the scene to 200
(where the default is 80). It was previously 0.02, a value so low it has
no noticeable effect.
- I added a keybind (space bar) to toggle the ambient light, allowing
users to see the difference it makes. I also added text showing the
state of the ambient light (on, off) and text showing the keybind.
I'm very new to Bevy and Rust, so apologies if any of this code is not
up to scratch.
## Testing
I checked all the text still updates correctly and all keybinds still
work. In my testing, it looks to work okay.
I'd appreciate others testing too, just to make sure.
---
## Showcase
<details>
<summary>Click to view showcase</summary>
<img width="960" alt="Screenshot (11)"
src="https://github.com/user-attachments/assets/916e569e-cd49-43fd-b81d-aae600890cd3"
/>
<img width="959" alt="Screenshot (12)"
src="https://github.com/user-attachments/assets/0e16bb3a-c38a-4a8d-8248-edf3b820d238"
/>
</details>
# Objective
Closes#19564.
The current `Event` trait looks like this:
```rust
pub trait Event: Send + Sync + 'static {
type Traversal: Traversal<Self>;
const AUTO_PROPAGATE: bool = false;
fn register_component_id(world: &mut World) -> ComponentId { ... }
fn component_id(world: &World) -> Option<ComponentId> { ... }
}
```
The `Event` trait is used by both buffered events
(`EventReader`/`EventWriter`) and observer events. If they are observer
events, they can optionally be targeted at specific `Entity`s or
`ComponentId`s, and can even be propagated to other entities.
However, there has long been a desire to split the trait semantically
for a variety of reasons, see #14843, #14272, and #16031 for discussion.
Some reasons include:
- It's very uncommon to use a single event type as both a buffered event
and targeted observer event. They are used differently and tend to have
distinct semantics.
- A common footgun is using buffered events with observers or event
readers with observer events, as there is no type-level error that
prevents this kind of misuse.
- #19440 made `Trigger::target` return an `Option<Entity>`. This
*seriously* hurts ergonomics for the general case of entity observers,
as you need to `.unwrap()` each time. If we could statically determine
whether the event is expected to have an entity target, this would be
unnecessary.
There's really two main ways that we can categorize events: push vs.
pull (i.e. "observer event" vs. "buffered event") and global vs.
targeted:
| | Push | Pull |
| ------------ | --------------- | --------------------------- |
| **Global** | Global observer | `EventReader`/`EventWriter` |
| **Targeted** | Entity observer | - |
There are many ways to approach this, each with their tradeoffs.
Ultimately, we kind of want to split events both ways:
- A type-level distinction between observer events and buffered events,
to prevent people from using the wrong kind of event in APIs
- A statically designated entity target for observer events to avoid
accidentally using untargeted events for targeted APIs
This PR achieves these goals by splitting event traits into `Event`,
`EntityEvent`, and `BufferedEvent`, with `Event` being the shared trait
implemented by all events.
## `Event`, `EntityEvent`, and `BufferedEvent`
`Event` is now a very simple trait shared by all events.
```rust
pub trait Event: Send + Sync + 'static {
// Required for observer APIs
fn register_component_id(world: &mut World) -> ComponentId { ... }
fn component_id(world: &World) -> Option<ComponentId> { ... }
}
```
You can call `trigger` for *any* event, and use a global observer for
listening to the event.
```rust
#[derive(Event)]
struct Speak {
message: String,
}
// ...
app.add_observer(|trigger: On<Speak>| {
println!("{}", trigger.message);
});
// ...
commands.trigger(Speak {
message: "Y'all like these reworked events?".to_string(),
});
```
To allow an event to be targeted at entities and even propagated
further, you can additionally implement the `EntityEvent` trait:
```rust
pub trait EntityEvent: Event {
type Traversal: Traversal<Self>;
const AUTO_PROPAGATE: bool = false;
}
```
This lets you call `trigger_targets`, and to use targeted observer APIs
like `EntityCommands::observe`:
```rust
#[derive(Event, EntityEvent)]
#[entity_event(traversal = &'static ChildOf, auto_propagate)]
struct Damage {
amount: f32,
}
// ...
let enemy = commands.spawn((Enemy, Health(100.0))).id();
// Spawn some armor as a child of the enemy entity.
// When the armor takes damage, it will bubble the event up to the enemy.
let armor_piece = commands
.spawn((ArmorPiece, Health(25.0), ChildOf(enemy)))
.observe(|trigger: On<Damage>, mut query: Query<&mut Health>| {
// Note: `On::target` only exists because this is an `EntityEvent`.
let mut health = query.get(trigger.target()).unwrap();
health.0 -= trigger.amount();
});
commands.trigger_targets(Damage { amount: 10.0 }, armor_piece);
```
> [!NOTE]
> You *can* still also trigger an `EntityEvent` without targets using
`trigger`. We probably *could* make this an either-or thing, but I'm not
sure that's actually desirable.
To allow an event to be used with the buffered API, you can implement
`BufferedEvent`:
```rust
pub trait BufferedEvent: Event {}
```
The event can then be used with `EventReader`/`EventWriter`:
```rust
#[derive(Event, BufferedEvent)]
struct Message(String);
fn write_hello(mut writer: EventWriter<Message>) {
writer.write(Message("I hope these examples are alright".to_string()));
}
fn read_messages(mut reader: EventReader<Message>) {
// Process all buffered events of type `Message`.
for Message(message) in reader.read() {
println!("{message}");
}
}
```
In summary:
- Need a basic event you can trigger and observe? Derive `Event`!
- Need the event to be targeted at an entity? Derive `EntityEvent`!
- Need the event to be buffered and support the
`EventReader`/`EventWriter` API? Derive `BufferedEvent`!
## Alternatives
I'll now cover some of the alternative approaches I have considered and
briefly explored. I made this section collapsible since it ended up
being quite long :P
<details>
<summary>Expand this to see alternatives</summary>
### 1. Unified `Event` Trait
One option is not to have *three* separate traits (`Event`,
`EntityEvent`, `BufferedEvent`), and to instead just use associated
constants on `Event` to determine whether an event supports targeting
and buffering or not:
```rust
pub trait Event: Send + Sync + 'static {
type Traversal: Traversal<Self>;
const AUTO_PROPAGATE: bool = false;
const TARGETED: bool = false;
const BUFFERED: bool = false;
fn register_component_id(world: &mut World) -> ComponentId { ... }
fn component_id(world: &World) -> Option<ComponentId> { ... }
}
```
Methods can then use bounds like `where E: Event<TARGETED = true>` or
`where E: Event<BUFFERED = true>` to limit APIs to specific kinds of
events.
This would keep everything under one `Event` trait, but I don't think
it's necessarily a good idea. It makes APIs harder to read, and docs
can't easily refer to specific types of events. You can also create
weird invariants: what if you specify `TARGETED = false`, but have
`Traversal` and/or `AUTO_PROPAGATE` enabled?
### 2. `Event` and `Trigger`
Another option is to only split the traits between buffered events and
observer events, since that is the main thing people have been asking
for, and they have the largest API difference.
If we did this, I think we would need to make the terms *clearly*
separate. We can't really use `Event` and `BufferedEvent` as the names,
since it would be strange that `BufferedEvent` doesn't implement
`Event`. Something like `ObserverEvent` and `BufferedEvent` could work,
but it'd be more verbose.
For this approach, I would instead keep `Event` for the current
`EventReader`/`EventWriter` API, and call the observer event a
`Trigger`, since the "trigger" terminology is already used in the
observer context within Bevy (both as a noun and a verb). This is also
what a long [bikeshed on
Discord](https://discord.com/channels/691052431525675048/749335865876021248/1298057661878898791)
seemed to land on at the end of last year.
```rust
// For `EventReader`/`EventWriter`
pub trait Event: Send + Sync + 'static {}
// For observers
pub trait Trigger: Send + Sync + 'static {
type Traversal: Traversal<Self>;
const AUTO_PROPAGATE: bool = false;
const TARGETED: bool = false;
fn register_component_id(world: &mut World) -> ComponentId { ... }
fn component_id(world: &World) -> Option<ComponentId> { ... }
}
```
The problem is that "event" is just a really good term for something
that "happens". Observers are rapidly becoming the more prominent API,
so it'd be weird to give them the `Trigger` name and leave the good
`Event` name for the less common API.
So, even though a split like this seems neat on the surface, I think it
ultimately wouldn't really work. We want to keep the `Event` name for
observer events, and there is no good alternative for the buffered
variant. (`Message` was suggested, but saying stuff like "sends a
collision message" is weird.)
### 3. `GlobalEvent` + `TargetedEvent`
What if instead of focusing on the buffered vs. observed split, we
*only* make a distinction between global and targeted events?
```rust
// A shared event trait to allow global observers to work
pub trait Event: Send + Sync + 'static {
fn register_component_id(world: &mut World) -> ComponentId { ... }
fn component_id(world: &World) -> Option<ComponentId> { ... }
}
// For buffered events and non-targeted observer events
pub trait GlobalEvent: Event {}
// For targeted observer events
pub trait TargetedEvent: Event {
type Traversal: Traversal<Self>;
const AUTO_PROPAGATE: bool = false;
}
```
This is actually the first approach I implemented, and it has the neat
characteristic that you can only use non-targeted APIs like `trigger`
with a `GlobalEvent` and targeted APIs like `trigger_targets` with a
`TargetedEvent`. You have full control over whether the entity should or
should not have a target, as they are fully distinct at the type-level.
However, there's a few problems:
- There is no type-level indication of whether a `GlobalEvent` supports
buffered events or just non-targeted observer events
- An `Event` on its own does literally nothing, it's just a shared trait
required to make global observers accept both non-targeted and targeted
events
- If an event is both a `GlobalEvent` and `TargetedEvent`, global
observers again have ambiguity on whether an event has a target or not,
undermining some of the benefits
- The names are not ideal
### 4. `Event` and `EntityEvent`
We can fix some of the problems of Alternative 3 by accepting that
targeted events can also be used in non-targeted contexts, and simply
having the `Event` and `EntityEvent` traits:
```rust
// For buffered events and non-targeted observer events
pub trait Event: Send + Sync + 'static {
fn register_component_id(world: &mut World) -> ComponentId { ... }
fn component_id(world: &World) -> Option<ComponentId> { ... }
}
// For targeted observer events
pub trait EntityEvent: Event {
type Traversal: Traversal<Self>;
const AUTO_PROPAGATE: bool = false;
}
```
This is essentially identical to this PR, just without a dedicated
`BufferedEvent`. The remaining major "problem" is that there is still
zero type-level indication of whether an `Event` event *actually*
supports the buffered API. This leads us to the solution proposed in
this PR, using `Event`, `EntityEvent`, and `BufferedEvent`.
</details>
## Conclusion
The `Event` + `EntityEvent` + `BufferedEvent` split proposed in this PR
aims to solve all the common problems with Bevy's current event model
while keeping the "weirdness" factor minimal. It splits in terms of both
the push vs. pull *and* global vs. targeted aspects, while maintaining a
shared concept for an "event".
### Why I Like This
- The term "event" remains as a single concept for all the different
kinds of events in Bevy.
- Despite all event types being "events", they use fundamentally
different APIs. Instead of assuming that you can use an event type with
any pattern (when only one is typically supported), you explicitly opt
in to each one with dedicated traits.
- Using separate traits for each type of event helps with documentation
and clearer function signatures.
- I can safely make assumptions on expected usage.
- If I see that an event is an `EntityEvent`, I can assume that I can
use `observe` on it and get targeted events.
- If I see that an event is a `BufferedEvent`, I can assume that I can
use `EventReader` to read events.
- If I see both `EntityEvent` and `BufferedEvent`, I can assume that
both APIs are supported.
In summary: This allows for a unified concept for events, while limiting
the different ways to use them with opt-in traits. No more guess-work
involved when using APIs.
### Problems?
- Because `BufferedEvent` implements `Event` (for more consistent
semantics etc.), you can still use all buffered events for non-targeted
observers. I think this is fine/good. The important part is that if you
see that an event implements `BufferedEvent`, you know that the
`EventReader`/`EventWriter` API should be supported. Whether it *also*
supports other APIs is secondary.
- I currently only support `trigger_targets` for an `EntityEvent`.
However, you can technically target components too, without targeting
any entities. I consider that such a niche and advanced use case that
it's not a huge problem to only support it for `EntityEvent`s, but we
could also split `trigger_targets` into `trigger_entities` and
`trigger_components` if we wanted to (or implement components as
entities :P).
- You can still trigger an `EntityEvent` *without* targets. I consider
this correct, since `Event` implements the non-targeted behavior, and
it'd be weird if implementing another trait *removed* behavior. However,
it does mean that global observers for entity events can technically
return `Entity::PLACEHOLDER` again (since I got rid of the
`Option<Entity>` added in #19440 for ergonomics). I think that's enough
of an edge case that it's not a huge problem, but it is worth keeping in
mind.
- ~~Deriving both `EntityEvent` and `BufferedEvent` for the same type
currently duplicates the `Event` implementation, so you instead need to
manually implement one of them.~~ Changed to always requiring `Event` to
be derived.
## Related Work
There are plans to implement multi-event support for observers,
especially for UI contexts. [Cart's
example](https://github.com/bevyengine/bevy/issues/14649#issuecomment-2960402508)
API looked like this:
```rust
// Truncated for brevity
trigger: Trigger<(
OnAdd<Pressed>,
OnRemove<Pressed>,
OnAdd<InteractionDisabled>,
OnRemove<InteractionDisabled>,
OnInsert<Hovered>,
)>,
```
I believe this shouldn't be in conflict with this PR. If anything, this
PR might *help* achieve the multi-event pattern for entity observers
with fewer footguns: by statically enforcing that all of these events
are `EntityEvent`s in the context of `EntityCommands::observe`, we can
avoid misuse or weird cases where *some* events inside the trigger are
targeted while others are not.
# Objective
This is part of the "core widgets" effort: #19236.
## Solution
This PR adds the "core slider" widget to the collection.
## Testing
Tested using examples `core_widgets` and `core_widgets_observers`.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
# Objective
- Update ron to the latest version.
- This is blocking changes to AnimationGraph (as some valid structs are
not capable of being deserialized).
## Solution
- Bump ron!
## Testing
- The particular issue I was blocked by seems to be resolved!
## Objective
Make it easier to use `IrradianceVolume` with fewer ways to silently
fail. Fix#19614.
## Solution
* Add `#[require(LightProbe)]` to `struct IrradianceVolume`.
* Document this fact.
* Also document the volume being centered on the origin by default (this
was the other thing that was unclear when getting started).
I also looked at the other implementor of `LightProbeComponent`,
`EnvironmentMapLight`, but it has a use which is *not* as a light probe,
so it should not require `LightProbe`.
## Testing
* Confirmed that `examples/3d/irradiance_volumes.rs` still works after
removing `LightProbe`.
* Reviewed generated documentation.
# Bevy Solari
<img
src="https://github.com/user-attachments/assets/94061fc8-01cf-4208-b72a-8eecad610d76"
width="100" />
## Preface
- See release notes.
- Please talk to me in #rendering-dev on discord or open a github
discussion if you have questions about the long term plan, and keep
discussion in this PR limited to the contents of the PR :)
## Connections
- Works towards #639, #16408.
- Spawned https://github.com/bevyengine/bevy/issues/18993.
- Need to fix RT stuff in naga_oil first
https://github.com/bevyengine/naga_oil/pull/116.
## This PR
After nearly two years, I've revived the raytraced lighting effort I
first started in https://github.com/bevyengine/bevy/pull/10000.
Unlike that PR, which has realtime techniques, I've limited this PR to:
* `RaytracingScenePlugin` - BLAS and TLAS building, geometry and texture
binding, sampling functions.
* `PathtracingPlugin` - A non-realtime path tracer intended to serve as
a testbed and reference.
## What's implemented?
* BLAS building on mesh load
* Emissive lights
* Directional lights with soft shadows
* Diffuse (lambert, not Bevy's diffuse BRDF) and emissive materials
* A reference path tracer with:
* Antialiasing
* Direct light sampling (next event estimation) with 0/1 MIS weights
* Importance-sampled BRDF bounces
* Russian roulette
## What's _not_ implemented?
* Anything realtime, including a real-time denoiser
* Integration with Bevy's rasterized gbuffer
* Specular materials
* Non-opaque geometry
* Any sort of CPU or GPU optimizations
* BLAS compaction, proper bindless, and further RT APIs are things that
we need wgpu to add
* PointLights, SpotLights, or skyboxes / environment lighting
* Support for materials other than StandardMaterial (and only a subset
of properties are supported)
* Skinned/morphed or otherwise animating/deformed meshes
* Mipmaps
* Adaptive self-intersection ray bias
* A good way for developers to detect whether the user's GPU supports RT
or not, and fallback to baked lighting.
* Documentation and actual finalized APIs (literally everything is
subject to change)
## End-user Usage
* Have a GPU that supports RT with inline ray queries
* Add `SolariPlugin` to your app
* Ensure any `Mesh` asset you want to use for raytracing has
`enable_raytracing: true` (defaults to true), and that it uses the
standard uncompressed position/normal/uv_0/tangent vertex attribute set,
triangle list topology, and 32-bit indices.
* If you don't want to build a BLAS and use the mesh for RT, set
enable_raytracing to false.
* Add the `RaytracingMesh3d` component to your entity (separate from
`Mesh3d` or `MeshletMesh3d`).
## Testing
- Did you test these changes? If so, how?
- Ran the solari example.
- Are there any parts that need more testing?
- Other test scenes probably. Normal mapping would be good to test.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- See the solari.rs example for how to setup raytracing.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- Windows 11, NVIDIA RTX 3080.
---------
Co-authored-by: atlv <email@atlasdostal.com>
Co-authored-by: IceSentry <IceSentry@users.noreply.github.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
## Objective
- Makes `headless_renderer` example work instead of exiting without
effect.
- Guides users who actually just need
[`Screenshot`](https://docs.rs/bevy/0.16.1/bevy/render/view/window/screenshot/struct.Screenshot.html)
to use that instead.
This PR was inspired by my own efforts to do headless rendering, in
which the complexity of the `headless_renderer` example was a
distraction, and this comment from
https://github.com/bevyengine/bevy/issues/12478#issuecomment-2094925039
:
> The example added in https://github.com/bevyengine/bevy/pull/13006
would benefit from this change: be sure to clean it up when tackling
this work :)
That “cleanup” was not done, and I thought to do it, but it seems to me
that using `Screenshot` (in its current form) in the example would not
be correct, because — if I understand correctly — the example is trying
to, potentially, capture many *consecutive* frames, whereas `Screenshot`
by itself gives no means to capture multiple frames without gaps or
duplicates. But perhaps I am wrong (the code is complex and not clearly
documented), or perhaps that feature isn’t worth preserving. In that
case, let me know and I will revise this PR.
## Solution
- Added `exit_condition: bevy:🪟:ExitCondition::DontExit`
- Added a link to `Screenshot` in the crate documentation.
## Testing
- Ran the example and confirmed that it now writes an image file and
then exits.
# Objective
Currently, the observer API looks like this:
```rust
app.add_observer(|trigger: Trigger<Explode>| {
info!("Entity {} exploded!", trigger.target());
});
```
Future plans for observers also include "multi-event observers" with a
trigger that looks like this (see [Cart's
example](https://github.com/bevyengine/bevy/issues/14649#issuecomment-2960402508)):
```rust
trigger: Trigger<(
OnAdd<Pressed>,
OnRemove<Pressed>,
OnAdd<InteractionDisabled>,
OnRemove<InteractionDisabled>,
OnInsert<Hovered>,
)>,
```
In scenarios like this, there is a lot of repetition of `On`. These are
expected to be very high-traffic APIs especially in UI contexts, so
ergonomics and readability are critical.
By renaming `Trigger` to `On`, we can make these APIs read more cleanly
and get rid of the repetition:
```rust
app.add_observer(|trigger: On<Explode>| {
info!("Entity {} exploded!", trigger.target());
});
```
```rust
trigger: On<(
Add<Pressed>,
Remove<Pressed>,
Add<InteractionDisabled>,
Remove<InteractionDisabled>,
Insert<Hovered>,
)>,
```
Names like `On<Add<Pressed>>` emphasize the actual event listener nature
more than `Trigger<OnAdd<Pressed>>`, and look cleaner. This *also* frees
up the `Trigger` name if we want to use it for the observer event type,
splitting them out from buffered events (bikeshedding this is out of
scope for this PR though).
For prior art:
[`bevy_eventlistener`](https://github.com/aevyrie/bevy_eventlistener)
used
[`On`](https://docs.rs/bevy_eventlistener/latest/bevy_eventlistener/event_listener/struct.On.html)
for its event listener type. Though in our case, the observer is the
event listener, and `On` is just a type containing information about the
triggered event.
## Solution
Steal from `bevy_event_listener` by @aevyrie and use `On`.
- Rename `Trigger` to `On`
- Rename `OnAdd` to `Add`
- Rename `OnInsert` to `Insert`
- Rename `OnReplace` to `Replace`
- Rename `OnRemove` to `Remove`
- Rename `OnDespawn` to `Despawn`
## Discussion
### Naming Conflicts??
Using a name like `Add` might initially feel like a very bad idea, since
it risks conflict with `core::ops::Add`. However, I don't expect this to
be a big problem in practice.
- You rarely need to actually implement the `Add` trait, especially in
modules that would use the Bevy ECS.
- In the rare cases where you *do* get a conflict, it is very easy to
fix by just disambiguating, for example using `ops::Add`.
- The `Add` event is a struct while the `Add` trait is a trait (duh), so
the compiler error should be very obvious.
For the record, renaming `OnAdd` to `Add`, I got exactly *zero* errors
or conflicts within Bevy itself. But this is of course not entirely
representative of actual projects *using* Bevy.
You might then wonder, why not use `Added`? This would conflict with the
`Added` query filter, so it wouldn't work. Additionally, the current
naming convention for observer events does not use past tense.
### Documentation
This does make documentation slightly more awkward when referring to
`On` or its methods. Previous docs often referred to `Trigger::target`
or "sends a `Trigger`" (which is... a bit strange anyway), which would
now be `On::target` and "sends an observer `Event`".
You can see the diff in this PR to see some of the effects. I think it
should be fine though, we may just need to reword more documentation to
read better.
# Objective
- Update the scroll example to use the latest API.
## Solution
- It now uses the 'children![]' API.
## Testing
- I manually verified that the scrolling was working
## Limitations
- Unfortunately, I couldn't find a way to spawn observers targeting the
entity inside the "fn() -> impl Bundle" function.
Link in the "asset settings" example. The struct was moved.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: theotherphil <phil.j.ellison@gmail.com>
# Objective
#19366 implemented core button widgets, which included the `Depressed`
state component.
`Depressed` was chosen instead of `Pressed` to avoid conflict with the
`Pointer<Pressed>` event, but it is problematic and awkward in many
ways:
- Using the word "depressed" for such a high-traffic type is not great
due to the obvious connection to "depressed" as in depression.
- "Depressed" is not what I would search for if I was looking for a
component like this, and I'm not aware of any other engine or UI
framework using the term.
- `Depressed` is not a very natural pair to the `Pointer<Pressed>`
event.
- It might be because I'm not a native English speaker, but I have very
rarely heard someone say "a button is depressed". Seeing it, my mind
initially goes from "depression??" to "oh, de-pressed, meaning released"
and definitely not "is pressed", even though that *is* also a valid
meaning for it.
A related problem is that the current `Pointer<Pressed>` and
`Pointer<Released>` event names use a different verb tense than all of
our other observer events such as `Pointer<Click>` or
`Pointer<DragStart>`. By fixing this and renaming `Pressed` (and
`Released`), we can then use `Pressed` instead of `Depressed` for the
state component.
Additionally, the `IsHovered` and `IsDirectlyHovered` components added
in #19366 use an inconsistent naming; the other similar components don't
use an `Is` prefix. It also makes query filters like `Has<IsHovered>`
and `With<IsHovered>` a bit more awkward.
This is partially related to Cart's [picking concept
proposal](https://gist.github.com/cart/756e48a149db2838028be600defbd24a?permalink_comment_id=5598154).
## Solution
- Rename `Pointer<Pressed>` to `Pointer<Press>`
- Rename `Pointer<Released>` to `Pointer<Release>`
- Rename `Depressed` to `Pressed`
- Rename `IsHovered` to `Hovered`
- Rename `IsDirectlyHovered` to `DirectlyHovered`
# Objective
Part of #19236
## Solution
Adds a new `bevy_core_widgets` crate containing headless widget
implementations. This PR adds a single `CoreButton` widget, more widgets
to be added later once this is approved.
## Testing
There's an example, ui/core_widgets.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#17183
## Solution
- Copied the stress settings from the `many_animated_sprite` example
that were mentioned in the ticket
## Testing
- Run the example
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
I set out with one simple goal: clearly document the differences between
each of the component lifecycle events via module docs.
Unfortunately, no such module existed: the various lifecycle code was
scattered to the wind.
Without a unified module, it's very hard to discover the related types,
and there's nowhere good to put my shiny new documentation.
## Solution
1. Unify the assorted types into a single
`bevy_ecs::component_lifecycle` module.
2. Write docs.
3. Write a migration guide.
## Testing
Thanks CI!
## Follow-up
1. The lifecycle event names are pretty confusing, especially
`OnReplace`. We should consider renaming those. No bikeshedding in my PR
though!
2. Observers need real module docs too :(
3. Any additional functional changes should be done elsewhere; this is a
simple docs and re-org PR.
---------
Co-authored-by: theotherphil <phil.j.ellison@gmail.com>
# Objective
Rename `JustifyText`:
* The name `JustifyText` is just ugly.
* It's inconsistent since no other `bevy_text` types have a `Text-`
suffix, only prefix.
* It's inconsistent with the other text layout enum `Linebreak` which
doesn't have a prefix or suffix.
Fixes#19521.
## Solution
Rename `JustifyText` to `Justify`.
Without other context, it's natural to assume the name `Justify` refers
to text justification.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
