# Objective
There are a lot of doctests that are `ignore`d for no documented reason.
And that should be fixed.
## Solution
I searched the bevy repo with the regex ` ```[a-z,]*ignore ` in order to
find all `ignore`d doctests. For each one of the `ignore`d doctests, I
did the following steps:
1. Attempt to remove the `ignored` attribute while still passing the
test. I did this by adding hidden dummy structs and imports.
2. If step 1 doesn't work, attempt to replace the `ignored` attribute
with the `no_run` attribute while still passing the test.
3. If step 2 doesn't work, keep the `ignored` attribute but add
documentation for why the `ignored` attribute was added.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
Allow mutably iterating over all registered diagnostics. This is a
useful utility method when exposing bevy's diagnostics in an editor that
allows toggling whether the diagnostic is enabled.
## Solution
- Add `iter_mut`, mirroring what `iter` does, just mutably.
---
## Changelog
### Added
- Added `DiagnosticsStore::iter_mut` for mutably iterating over all
registered diagnostics.
# Objective
- Better consistency with `add_systems`.
- Deprecating `add_plugin` in favor of a more powerful `add_plugins`.
- Allow passing `Plugin` to `add_plugins`.
- Allow passing tuples to `add_plugins`.
## Solution
- `App::add_plugins` now takes an `impl Plugins` parameter.
- `App::add_plugin` is deprecated.
- `Plugins` is a new sealed trait that is only implemented for `Plugin`,
`PluginGroup` and tuples over `Plugins`.
- All examples, benchmarks and tests are changed to use `add_plugins`,
using tuples where appropriate.
---
## Changelog
### Changed
- `App::add_plugins` now accepts all types that implement `Plugins`,
which is implemented for:
- Types that implement `Plugin`.
- Types that implement `PluginGroup`.
- Tuples (up to 16 elements) over types that implement `Plugins`.
- Deprecated `App::add_plugin` in favor of `App::add_plugins`.
## Migration Guide
- Replace `app.add_plugin(plugin)` calls with `app.add_plugins(plugin)`.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- Fixes#8782
## Solution
- Call `init_resource` on `register_diagnostic` so that a
`DiagnosticStore` gets initialized if it does not exist.
---------
Co-authored-by: François <mockersf@gmail.com>
# Objective
I was trying to add some `Diagnostics` to have a better break down of
performance but I noticed that the current implementation uses a
`ResMut` which forces the functions to all run sequentially whereas
before they could run in parallel. This created too great a performance
penalty to be usable.
## Solution
This PR reworks how the diagnostics work with a couple of breaking
changes. The idea is to change how `Diagnostics` works by changing it to
a `SystemParam`. This allows us to hold a `Deferred` buffer of
measurements that can be applied later, avoiding the need for multiple
mutable references to the hashmap. This means we can run systems that
write diagnostic measurements in parallel.
Firstly, we rename the old `Diagnostics` to `DiagnosticsStore`. This
clears up the original name for the new interface while allowing us to
preserve more closely the original API.
Then we create a new `Diagnostics` struct which implements `SystemParam`
and contains a deferred `SystemBuffer`. This can be used very similar to
the old `Diagnostics` for writing new measurements.
```rust
fn system(diagnostics: ResMut<Diagnostics>) { diagnostics.new_measurement(ID, || 10.0)}
// changes to
fn system(mut diagnostics: Diagnostics) { diagnostics.new_measurement(ID, || 10.0)}
```
For reading the diagnostics, the user needs to change from `Diagnostics`
to `DiagnosticsStore` but otherwise the function calls are the same.
Finally, we add a new method to the `App` for registering diagnostics.
This replaces the old method of creating a startup system and adding it
manually.
Testing it, this PR does indeed allow Diagnostic systems to be run in
parallel.
## Changelog
- Change `Diagnostics` to implement `SystemParam` which allows
diagnostic systems to run in parallel.
## Migration Guide
- Register `Diagnostic`'s using the new
`app.register_diagnostic(Diagnostic::new(DIAGNOSTIC_ID,
"diagnostic_name", 10));`
- In systems for writing new measurements, change `mut diagnostics:
ResMut<Diagnostics>` to `mut diagnostics: Diagnostics` to allow the
systems to run in parallel.
- In systems for reading measurements, change `diagnostics:
Res<Diagnostics>` to `diagnostics: Res<DiagnosticsStore>`.
# Objective
- Add Time-Adjusted Rolling EMA-based smoothing to diagnostics.
- Closes#4983; see that issue for more more information.
## Terms
- EMA - [Exponential Moving Average](https://en.wikipedia.org/wiki/Moving_average#Exponential_moving_average)
- SMA - [Simple Moving Average](https://en.wikipedia.org/wiki/Moving_average#Simple_moving_average)
## Solution
- We use a fairly standard approximation of a true EMA where $EMA_{\text{frame}} = EMA_{\text{previous}} + \alpha \left( x_{\text{frame}} - EMA_{\text{previous}} \right)$ where $\alpha = \Delta t / \tau$ and $\tau$ is an arbitrary smoothness factor. (See #4983 for more discussion of the math.)
- The smoothness factor is here defaulted to $2 / 21$; this was chosen fairly arbitrarily as supposedly related to the existing 20-bucket SMA.
- The smoothness factor can be set on a per-diagnostic basis via `Diagnostic::with_smoothing_factor`.
---
## Changelog
### Added
- `Diagnostic::smoothed` - provides an exponentially smoothed view of a recorded diagnostic, to e.g. reduce jitter in frametime readings.
### Changed
- `LogDiagnosticsPlugin` now records the smoothed value rather than the raw value.
- For diagnostics recorded less often than every 0.1 seconds, this change to defaults will have no visible effect.
- For discrete diagnostics where this smoothing is not desirable, set a smoothing factor of 0 to disable smoothing.
- The average of the recent history is still shown when available.
*This PR description is an edited copy of #5007, written by @alice-i-cecile.*
# Objective
Follow-up to https://github.com/bevyengine/bevy/pull/2254. The `Resource` trait currently has a blanket implementation for all types that meet its bounds.
While ergonomic, this results in several drawbacks:
* it is possible to make confusing, silent mistakes such as inserting a function pointer (Foo) rather than a value (Foo::Bar) as a resource
* it is challenging to discover if a type is intended to be used as a resource
* we cannot later add customization options (see the [RFC](https://github.com/bevyengine/rfcs/blob/main/rfcs/27-derive-component.md) for the equivalent choice for Component).
* dependencies can use the same Rust type as a resource in invisibly conflicting ways
* raw Rust types used as resources cannot preserve privacy appropriately, as anyone able to access that type can read and write to internal values
* we cannot capture a definitive list of possible resources to display to users in an editor
## Notes to reviewers
* Review this commit-by-commit; there's effectively no back-tracking and there's a lot of churn in some of these commits.
*ira: My commits are not as well organized :')*
* I've relaxed the bound on Local to Send + Sync + 'static: I don't think these concerns apply there, so this can keep things simple. Storing e.g. a u32 in a Local is fine, because there's a variable name attached explaining what it does.
* I think this is a bad place for the Resource trait to live, but I've left it in place to make reviewing easier. IMO that's best tackled with https://github.com/bevyengine/bevy/issues/4981.
## Changelog
`Resource` is no longer automatically implemented for all matching types. Instead, use the new `#[derive(Resource)]` macro.
## Migration Guide
Add `#[derive(Resource)]` to all types you are using as a resource.
If you are using a third party type as a resource, wrap it in a tuple struct to bypass orphan rules. Consider deriving `Deref` and `DerefMut` to improve ergonomics.
`ClearColor` no longer implements `Component`. Using `ClearColor` as a component in 0.8 did nothing.
Use the `ClearColorConfig` in the `Camera3d` and `Camera2d` components instead.
Co-authored-by: Alice <alice.i.cecile@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: devil-ira <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
- changed `EntityCountDiagnosticsPlugin` to not use an exclusive system to get its entity count
- removed mention of `WgpuResourceDiagnosticsPlugin` in example `log_diagnostics` as it doesn't exist anymore
- added ability to enable, disable ~~or toggle~~ a diagnostic (fix#3767)
- made diagnostic values lazy, so they are only computed if the diagnostic is enabled
- do not log an average for diagnostics with only one value
- removed `sum` function from diagnostic as it isn't really useful
- ~~do not keep an average of the FPS diagnostic. it is already an average on the last 20 frames, so the average FPS was an average of the last 20 frames over the last 20 frames~~
- do not compute the FPS value as an average over the last 20 frames but give the actual "instant FPS"
- updated log format to use variable capture
- added some doc
- the frame counter diagnostic value can be reseted to 0
What is says on the tin.
This has got more to do with making `clippy` slightly more *quiet* than it does with changing anything that might greatly impact readability or performance.
that said, deriving `Default` for a couple of structs is a nice easy win
# Objective
- Currently, when getting a diagnostic value, the oldest value is returned. This is not the best for a diagnostic with a large history, as you could get a value from several frames away
## Solution
- I changed the order in which the history is used to follow ["The “default” usage of this type as a queue is to use push_back to add to the queue, and pop_front to remove from the queue."](https://doc.rust-lang.org/std/collections/vec_deque/struct.VecDeque.html)
#3457 adds the `doc_markdown` clippy lint, which checks doc comments to make sure code identifiers are escaped with backticks. This causes a lot of lint errors, so this is one of a number of PR's that will fix those lint errors one crate at a time.
This PR fixes lints in the `bevy_diagnostic` crate.
* Remove AHashExt
There is little benefit of Hash*::new() over Hash*::default(), but it
does require more code that needs to be duplicated for every Hash* in
bevy_utils. It may also slightly increase compile times.
* Add StableHash* to bevy_utils
* Use StableHashMap instead of HashMap + BTreeSet for diagnostics
This is a significant reduction in the release mode compile times of
bevy_diagnostics
```
Benchmark #1: touch crates/bevy_diagnostic/src/lib.rs && cargo build --release -p bevy_diagnostic -j1
Time (mean ± σ): 3.645 s ± 0.009 s [User: 3.551 s, System: 0.094 s]
Range (min … max): 3.632 s … 3.658 s 20 runs
```
```
Benchmark #1: touch crates/bevy_diagnostic/src/lib.rs && cargo build --release -p bevy_diagnostic -j1
Time (mean ± σ): 2.938 s ± 0.012 s [User: 2.850 s, System: 0.090 s]
Range (min … max): 2.919 s … 2.969 s 20 runs
```
* move print diagnostics to log
* entity count diagnostic
* asset count diagnostic
* remove useless `pub`s
* use `BTreeMap` instead of `HashMap`
* get entity count from world
* keep ordered list of diagnostics
