# Objective
- Fixes#15460 (will open new issues for further `no_std` efforts)
- Supersedes #17715
## Solution
- Threaded in new features as required
- Made certain crates optional but default enabled
- Removed `compile-check-no-std` from internal `ci` tool since GitHub CI
can now simply check `bevy` itself now
- Added CI task to check `bevy` on `thumbv6m-none-eabi` to ensure
`portable-atomic` support is still valid [^1]
[^1]: This may be controversial, since it could be interpreted as
implying Bevy will maintain support for `thumbv6m-none-eabi` going
forward. In reality, just like `x86_64-unknown-none`, this is a
[canary](https://en.wiktionary.org/wiki/canary_in_a_coal_mine) target to
make it clear when `portable-atomic` no longer works as intended (fixing
atomic support on atomically challenged platforms). If a PR comes
through and makes supporting this class of platforms impossible, then
this CI task can be removed. I however wager this won't be a problem.
## Testing
- CI
---
## Release Notes
Bevy now has support for `no_std` directly from the `bevy` crate.
Users can disable default features and enable a new `default_no_std`
feature instead, allowing `bevy` to be used in `no_std` applications and
libraries.
```toml
# Bevy for `no_std` platforms
bevy = { version = "0.16", default-features = false, features = ["default_no_std"] }
```
`default_no_std` enables certain required features, such as `libm` and
`critical-section`, and as many optional crates as possible (currently
just `bevy_state`). For atomically-challenged platforms such as the
Raspberry Pi Pico, `portable-atomic` will be used automatically.
For library authors, we recommend depending on `bevy` with
`default-features = false` to allow `std` and `no_std` users to both
depend on your crate. Here are some recommended features a library crate
may want to expose:
```toml
[features]
# Most users will be on a platform which has `std` and can use the more-powerful `async_executor`.
default = ["std", "async_executor"]
# Features for typical platforms.
std = ["bevy/std"]
async_executor = ["bevy/async_executor"]
# Features for `no_std` platforms.
libm = ["bevy/libm"]
critical-section = ["bevy/critical-section"]
[dependencies]
# We disable default features to ensure we don't accidentally enable `std` on `no_std` targets, for example.
bevy = { version = "0.16", default-features = false }
```
While this is verbose, it gives the maximum control to end-users to
decide how they wish to use Bevy on their platform.
We encourage library authors to experiment with `no_std` support. For
libraries relying exclusively on `bevy` and no other dependencies, it
may be as simple as adding `#![no_std]` to your `lib.rs` and exposing
features as above! Bevy can also provide many `std` types, such as
`HashMap`, `Mutex`, and `Instant` on all platforms. See
`bevy::platform_support` for details on what's available out of the box!
## Migration Guide
- If you were previously relying on `bevy` with default features
disabled, you may need to enable the `std` and `async_executor`
features.
- `bevy_reflect` has had its `bevy` feature removed. If you were relying
on this feature, simply enable `smallvec` and `smol_str` instead.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#17960
## Solution
- Followed the [edition upgrade
guide](https://doc.rust-lang.org/edition-guide/editions/transitioning-an-existing-project-to-a-new-edition.html)
## Testing
- CI
---
## Summary of Changes
### Documentation Indentation
When using lists in documentation, proper indentation is now linted for.
This means subsequent lines within the same list item must start at the
same indentation level as the item.
```rust
/* Valid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
/* Invalid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
```
### Implicit `!` to `()` Conversion
`!` (the never return type, returned by `panic!`, etc.) no longer
implicitly converts to `()`. This is particularly painful for systems
with `todo!` or `panic!` statements, as they will no longer be functions
returning `()` (or `Result<()>`), making them invalid systems for
functions like `add_systems`. The ideal fix would be to accept functions
returning `!` (or rather, _not_ returning), but this is blocked on the
[stabilisation of the `!` type
itself](https://doc.rust-lang.org/std/primitive.never.html), which is
not done.
The "simple" fix would be to add an explicit `-> ()` to system
signatures (e.g., `|| { todo!() }` becomes `|| -> () { todo!() }`).
However, this is _also_ banned, as there is an existing lint which (IMO,
incorrectly) marks this as an unnecessary annotation.
So, the "fix" (read: workaround) is to put these kinds of `|| -> ! { ...
}` closuers into variables and give the variable an explicit type (e.g.,
`fn()`).
```rust
// Valid
let system: fn() = || todo!("Not implemented yet!");
app.add_systems(..., system);
// Invalid
app.add_systems(..., || todo!("Not implemented yet!"));
```
### Temporary Variable Lifetimes
The order in which temporary variables are dropped has changed. The
simple fix here is _usually_ to just assign temporaries to a named
variable before use.
### `gen` is a keyword
We can no longer use the name `gen` as it is reserved for a future
generator syntax. This involved replacing uses of the name `gen` with
`r#gen` (the raw-identifier syntax).
### Formatting has changed
Use statements have had the order of imports changed, causing a
substantial +/-3,000 diff when applied. For now, I have opted-out of
this change by amending `rustfmt.toml`
```toml
style_edition = "2021"
```
This preserves the original formatting for now, reducing the size of
this PR. It would be a simple followup to update this to 2024 and run
`cargo fmt`.
### New `use<>` Opt-Out Syntax
Lifetimes are now implicitly included in RPIT types. There was a handful
of instances where it needed to be added to satisfy the borrow checker,
but there may be more cases where it _should_ be added to avoid
breakages in user code.
### `MyUnitStruct { .. }` is an invalid pattern
Previously, you could match against unit structs (and unit enum
variants) with a `{ .. }` destructuring. This is no longer valid.
### Pretty much every use of `ref` and `mut` are gone
Pattern binding has changed to the point where these terms are largely
unused now. They still serve a purpose, but it is far more niche now.
### `iter::repeat(...).take(...)` is bad
New lint recommends using the more explicit `iter::repeat_n(..., ...)`
instead.
## Migration Guide
The lifetimes of functions using return-position impl-trait (RPIT) are
likely _more_ conservative than they had been previously. If you
encounter lifetime issues with such a function, please create an issue
to investigate the addition of `+ use<...>`.
## Notes
- Check the individual commits for a clearer breakdown for what
_actually_ changed.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
Currently, Bevy rebuilds the buffer containing all the transforms for
joints every frame, during the extraction phase. This is inefficient in
cases in which many skins are present in the scene and their joints
don't move, such as the Caldera test scene.
To address this problem, this commit switches skin extraction to use a
set of retained GPU buffers with allocations managed by the offset
allocator. I use fine-grained change detection in order to determine
which skins need updating. Note that the granularity is on the level of
an entire skin, not individual joints. Using the change detection at
that level would yield poor performance in common cases in which an
entire skin is animated at once. Also, this patch yields additional
performance from the fact that changing joint transforms no longer
requires the skinned mesh to be re-extracted.
Note that this optimization can be a double-edged sword. In
`many_foxes`, fine-grained change detection regressed the performance of
`extract_skins` by 3.4x. This is because every joint is updated every
frame in that example, so change detection is pointless and is pure
overhead. Because the `many_foxes` workload is actually representative
of animated scenes, this patch includes a heuristic that disables
fine-grained change detection if the number of transformed entities in
the frame exceeds a certain fraction of the total number of joints.
Currently, this threshold is set to 25%. Note that this is a crude
heuristic, because it doesn't distinguish between the number of
transformed *joints* and the number of transformed *entities*; however,
it should be good enough to yield the optimum code path most of the
time.
Finally, this patch fixes a bug whereby skinned meshes are actually
being incorrectly retained if the buffer offsets of the joints of those
skinned meshes changes from frame to frame. To fix this without
retaining skins, we would have to re-extract every skinned mesh every
frame. Doing this was a significant regression on Caldera. With this PR,
by contrast, mesh joints stay at the same buffer offset, so we don't
have to update the `MeshInputUniform` containing the buffer offset every
frame. This also makes PR #17717 easier to implement, because that PR
uses the buffer offset from the previous frame, and the logic for
calculating that is simplified if the previous frame's buffer offset is
guaranteed to be identical to that of the current frame.
On Caldera, this patch reduces the time spent in `extract_skins` from
1.79 ms to near zero. On `many_foxes`, this patch regresses the
performance of `extract_skins` by approximately 10%-25%, depending on
the number of foxes. This has only a small impact on frame rate.
Didn't remove WgpuWrapper. Not sure if it's needed or not still.
## Testing
- Did you test these changes? If so, how? Example runner
- Are there any parts that need more testing? Web (portable atomics
thingy?), DXC.
## Migration Guide
- Bevy has upgraded to [wgpu
v24](https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md#v2400-2025-01-15).
- When using the DirectX 12 rendering backend, the new priority system
for choosing a shader compiler is as follows:
- If the `WGPU_DX12_COMPILER` environment variable is set at runtime, it
is used
- Else if the new `statically-linked-dxc` feature is enabled, a custom
version of DXC will be statically linked into your app at compile time.
- Else Bevy will look in the app's working directory for
`dxcompiler.dll` and `dxil.dll` at runtime.
- Else if they are missing, Bevy will fall back to FXC (not recommended)
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IceSentry <c.giguere42@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- publish script copy the license files to all subcrates, meaning that
all publish are dirty. this breaks git verification of crates
- the order and list of crates to publish is manually maintained,
leading to error. cargo 1.84 is more strict and the list is currently
wrong
## Solution
- duplicate all the licenses to all crates and remove the
`--allow-dirty` flag
- instead of a manual list of crates, get it from `cargo package
--workspace`
- remove the `--no-verify` flag to... verify more things?
Fixes#17535
Bevy's approach to handling "entity mapping" during spawning and cloning
needs some work. The addition of
[Relations](https://github.com/bevyengine/bevy/pull/17398) both
[introduced a new "duplicate entities" bug when spawning scenes in the
scene system](#17535) and made the weaknesses of the current mapping
system exceedingly clear:
1. Entity mapping requires _a ton_ of boilerplate (implement or derive
VisitEntities and VisitEntitesMut, then register / reflect MapEntities).
Knowing the incantation is challenging and if you forget to do it in
part or in whole, spawning subtly breaks.
2. Entity mapping a spawned component in scenes incurs unnecessary
overhead: look up ReflectMapEntities, create a _brand new temporary
instance_ of the component using FromReflect, map the entities in that
instance, and then apply that on top of the actual component using
reflection. We can do much better.
Additionally, while our new [Entity cloning
system](https://github.com/bevyengine/bevy/pull/16132) is already pretty
great, it has some areas we can make better:
* It doesn't expose semantic info about the clone (ex: ignore or "clone
empty"), meaning we can't key off of that in places where it would be
useful, such as scene spawning. Rather than duplicating this info across
contexts, I think it makes more sense to add that info to the clone
system, especially given that we'd like to use cloning code in some of
our spawning scenarios.
* EntityCloner is currently built in a way that prioritizes a single
entity clone
* EntityCloner's recursive cloning is built to be done "inside out" in a
parallel context (queue commands that each have a clone of
EntityCloner). By making EntityCloner the orchestrator of the clone we
can remove internal arcs, improve the clarity of the code, make
EntityCloner mutable again, and simplify the builder code.
* EntityCloner does not currently take into account entity mapping. This
is necessary to do true "bullet proof" cloning, would allow us to unify
the per-component scene spawning and cloning UX, and ultimately would
allow us to use EntityCloner in place of raw reflection for scenes like
`Scene(World)` (which would give us a nice performance boost: fewer
archetype moves, less reflection overhead).
## Solution
### Improved Entity Mapping
First, components now have first-class "entity visiting and mapping"
behavior:
```rust
#[derive(Component, Reflect)]
#[reflect(Component)]
struct Inventory {
size: usize,
#[entities]
items: Vec<Entity>,
}
```
Any field with the `#[entities]` annotation will be viewable and
mappable when cloning and spawning scenes.
Compare that to what was required before!
```rust
#[derive(Component, Reflect, VisitEntities, VisitEntitiesMut)]
#[reflect(Component, MapEntities)]
struct Inventory {
#[visit_entities(ignore)]
size: usize,
items: Vec<Entity>,
}
```
Additionally, for relationships `#[entities]` is implied, meaning this
"just works" in scenes and cloning:
```rust
#[derive(Component, Reflect)]
#[relationship(relationship_target = Children)]
#[reflect(Component)]
struct ChildOf(pub Entity);
```
Note that Component _does not_ implement `VisitEntities` directly.
Instead, it has `Component::visit_entities` and
`Component::visit_entities_mut` methods. This is for a few reasons:
1. We cannot implement `VisitEntities for C: Component` because that
would conflict with our impl of VisitEntities for anything that
implements `IntoIterator<Item=Entity>`. Preserving that impl is more
important from a UX perspective.
2. We should not implement `Component: VisitEntities` VisitEntities in
the Component derive, as that would increase the burden of manual
Component trait implementors.
3. Making VisitEntitiesMut directly callable for components would make
it easy to invalidate invariants defined by a component author. By
putting it in the `Component` impl, we can make it harder to call
naturally / unavailable to autocomplete using `fn
visit_entities_mut(this: &mut Self, ...)`.
`ReflectComponent::apply_or_insert` is now
`ReflectComponent::apply_or_insert_mapped`. By moving mapping inside
this impl, we remove the need to go through the reflection system to do
entity mapping, meaning we no longer need to create a clone of the
target component, map the entities in that component, and patch those
values on top. This will make spawning mapped entities _much_ faster
(The default `Component::visit_entities_mut` impl is an inlined empty
function, so it will incur no overhead for unmapped entities).
### The Bug Fix
To solve #17535, spawning code now skips entities with the new
`ComponentCloneBehavior::Ignore` and
`ComponentCloneBehavior::RelationshipTarget` variants (note
RelationshipTarget is a temporary "workaround" variant that allows
scenes to skip these components. This is a temporary workaround that can
be removed as these cases should _really_ be using EntityCloner logic,
which should be done in a followup PR. When that is done,
`ComponentCloneBehavior::RelationshipTarget` can be merged into the
normal `ComponentCloneBehavior::Custom`).
### Improved Cloning
* `Option<ComponentCloneHandler>` has been replaced by
`ComponentCloneBehavior`, which encodes additional intent and context
(ex: `Default`, `Ignore`, `Custom`, `RelationshipTarget` (this last one
is temporary)).
* Global per-world entity cloning configuration has been removed. This
felt overly complicated, increased our API surface, and felt too
generic. Each clone context can have different requirements (ex: what a
user wants in a specific system, what a scene spawner wants, etc). I'd
prefer to see how far context-specific EntityCloners get us first.
* EntityCloner's internals have been reworked to remove Arcs and make it
mutable.
* EntityCloner is now directly stored on EntityClonerBuilder,
simplifying the code somewhat
* EntityCloner's "bundle scratch" pattern has been moved into the new
BundleScratch type, improving its usability and making it usable in
other contexts (such as future cross-world cloning code). Currently this
is still private, but with some higher level safe APIs it could be used
externally for making dynamic bundles
* EntityCloner's recursive cloning behavior has been "externalized". It
is now responsible for orchestrating recursive clones, meaning it no
longer needs to be sharable/clone-able across threads / read-only.
* EntityCloner now does entity mapping during clones, like scenes do.
This gives behavior parity and also makes it more generically useful.
* `RelatonshipTarget::RECURSIVE_SPAWN` is now
`RelationshipTarget::LINKED_SPAWN`, and this field is used when cloning
relationship targets to determine if cloning should happen recursively.
The new `LINKED_SPAWN` term was picked to make it more generically
applicable across spawning and cloning scenarios.
## Next Steps
* I think we should adapt EntityCloner to support cross world cloning. I
think this PR helps set the stage for that by making the internals
slightly more generalized. We could have a CrossWorldEntityCloner that
reuses a lot of this infrastructure.
* Once we support cross world cloning, we should use EntityCloner to
spawn `Scene(World)` scenes. This would yield significant performance
benefits (no archetype moves, less reflection overhead).
---------
Co-authored-by: eugineerd <70062110+eugineerd@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Most of the `*MeshBuilder` classes are not implementing `Reflect`
## Solution
- Implementing `Reflect` for all `*MeshBuilder` were is possible.
- Make sure all `*MeshBuilder` implements `Default`.
- Adding new `MeshBuildersPlugin` that registers all `*MeshBuilder`
types.
## Testing
- `cargo run -p ci`
- Tested some examples like `3d_scene` just in case something was
broken.
# Objective
- Contributes to #16877
## Solution
- Moved `hashbrown`, `foldhash`, and related types out of `bevy_utils`
and into `bevy_platform_support`
- Refactored the above to match the layout of these types in `std`.
- Updated crates as required.
## Testing
- CI
---
## Migration Guide
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::hash`:
- `FixedState`
- `DefaultHasher`
- `RandomState`
- `FixedHasher`
- `Hashed`
- `PassHash`
- `PassHasher`
- `NoOpHash`
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::collections`:
- `HashMap`
- `HashSet`
- `bevy_utils::hashbrown` has been removed. Instead, import from
`bevy_platform_support::collections` _or_ take a dependency on
`hashbrown` directly.
- `bevy_utils::Entry` has been removed. Instead, import from
`bevy_platform_support::collections::hash_map` or
`bevy_platform_support::collections::hash_set` as appropriate.
- All of the above equally apply to `bevy::utils` and
`bevy::platform_support`.
## Notes
- I left `PreHashMap`, `PreHashMapExt`, and `TypeIdMap` in `bevy_utils`
as they might be candidates for micro-crating. They can always be moved
into `bevy_platform_support` at a later date if desired.
# Objective
Make `Mesh::merge` more resilient to use.
Currently, it's difficult to make sure `Mesh::merge` will not panic
(we'd have to check if all attributes are compatible).
- I'd appreciate it for utility function to convert different mesh
representations such as:
https://github.com/dimforge/bevy_rapier/pull/628.
## Solution
- Make `Mesh::merge` return a `Result`.
## Testing
- It builds
## Migration Guide
- `Mesh::merge` now returns a `Result<(), MeshMergeError>`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Greeble <166992735+greeble-dev@users.noreply.github.com>
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
`bevy_ecs`'s `system` module is something of a grab bag, and *very*
large. This is particularly true for the `system_param` module, which is
more than 2k lines long!
While it could be defensible to put `Res` and `ResMut` there (lol no
they're in change_detection.rs, obviously), it doesn't make any sense to
put the `Resource` trait there. This is confusing to navigate (and
painful to work on and review).
## Solution
- Create a root level `bevy_ecs/resource.rs` module to mirror
`bevy_ecs/component.rs`
- move the `Resource` trait to that module
- move the `Resource` derive macro to that module as well (Rust really
likes when you pun on the names of the derive macro and trait and put
them in the same path)
- fix all of the imports
## Notes to reviewers
- We could probably move more stuff into here, but I wanted to keep this
PR as small as possible given the absurd level of import changes.
- This PR is ground work for my upcoming attempts to store resource data
on components (resources-as-entities). Splitting this code out will make
the work and review a bit easier, and is the sort of overdue refactor
that's good to do as part of more meaningful work.
## Testing
cargo build works!
## Migration Guide
`bevy_ecs::system::Resource` has been moved to
`bevy_ecs::resource::Resource`.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/17111
## Solution
Move `#![warn(clippy::allow_attributes,
clippy::allow_attributes_without_reason)]` to the workspace `Cargo.toml`
## Testing
Lots of CI testing, and local testing too.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
- While all
[`MeshBuilder`](https://dev-docs.bevyengine.org/bevy/prelude/trait.MeshBuilder.html)s
can be created by first creating the primitive `bevy_math` type and
using
[`Meshable`](https://dev-docs.bevyengine.org/bevy/prelude/trait.Meshable.html),
most builders have their own `const` constructors that can be used
instead. Some builders are missing constructors, however, making them
unavailable in `const` contexts.
## Solution
- Add a `const` constructor for `RegularPolygonMeshBuilder`,
`RhombusMeshBuilder`, `Triangle2dMeshBuilder`, and
`RectangleMeshBuilder`.
- Add a note on the requirements of `ConvexPolygonMeshBuilder`, and
recommend using `ConvexPolygon::new().mesh()` instead.
- A constructor cannot easily be created for this type, since it
requires duplicating all of `ConvexPolygon::new()`'s verification code.
I may be able to work around this, but it requires touching a bit more
code surface. Opinions?
## Testing
Not much beyond CI! The changes are trivial enough that only a cursory
glance for typos and switched variables should be necessary.
## Note for Reviewers
Hi! I haven't directly used the types I modify in this PR beyond some
benchmarking work I did this morning. If you're familiar with these
types, please let me know if any of the constructors need additional
validation (or if the constructors shouldn't be there at all). Thanks!
---------
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
# Objective
I realized that setting these to `deny` may have been a little
aggressive - especially since we upgrade warnings to denies in CI.
## Solution
Downgrades these lints to `warn`, so that compiles can work locally. CI
will still treat these as denies.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_mesh` in line with the new restrictions.
## Testing
`cargo clippy --tests` and `cargo test --package bevy_mesh` were run,
and no errors were encountered.
Bump version after release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
- Contributes to #11478
## Solution
- Made `bevy_utils::tracing` `doc(hidden)`
- Re-exported `tracing` from `bevy_log` for end-users
- Added `tracing` directly to crates that need it.
## Testing
- CI
---
## Migration Guide
If you were importing `tracing` via `bevy::utils::tracing`, instead use
`bevy::log::tracing`. Note that many items within `tracing` are also
directly re-exported from `bevy::log` as well, so you may only need
`bevy::log` for the most common items (e.g., `warn!`, `trace!`, etc.).
This also applies to the `log_once!` family of macros.
## Notes
- While this doesn't reduce the line-count in `bevy_utils`, it further
decouples the internal crates from `bevy_utils`, making its eventual
removal more feasible in the future.
- I have just imported `tracing` as we do for all dependencies. However,
a workspace dependency may be more appropriate for version management.
# Objective
We were waiting for 1.83 to address most of these, due to a bug with
`missing_docs` and `expect`. Relates to, but does not entirely complete,
#15059.
## Solution
- Upgrade to 1.83
- Switch `allow(missing_docs)` to `expect(missing_docs)`
- Remove a few now-unused `allow`s along the way, or convert to `expect`
Updating dependencies; adopted version of #15696. (Supercedes #15696.)
Long answer: hashbrown is no longer using ahash by default, meaning that
we can't use the default-hasher methods with ahasher. So, we have to use
the longer-winded versions instead. This takes the opportunity to also
switch our default hasher as well, but without actually enabling the
default-hasher feature for hashbrown, meaning that we'll be able to
change our hasher more easily at the cost of all of these method calls
being obnoxious forever.
One large change from 0.15 is that `insert_unique_unchecked` is now
`unsafe`, and for cases where unsafe code was denied at the crate level,
I replaced it with `insert`.
## Migration Guide
`bevy_utils` has updated its version of `hashbrown` to 0.15 and now
defaults to `foldhash` instead of `ahash`. This means that if you've
hard-coded your hasher to `bevy_utils::AHasher` or separately used the
`ahash` crate in your code, you may need to switch to `foldhash` to
ensure that everything works like it does in Bevy.
# Objective
Fixes#16610, related to #16702
## Solution
Upgrade typos and its configuration
## Testing
- Did you test these changes? If so, how? No
- Are there any parts that need more testing? No
- How can other people (reviewers) test your changes? Is there anything
specific they need to know? No
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test? Not applicable
# Objective
- Remove `derive_more`'s error derivation and replace it with
`thiserror`
## Solution
- Added `derive_more`'s `error` feature to `deny.toml` to prevent it
sneaking back in.
- Reverted to `thiserror` error derivation
## Notes
Merge conflicts were too numerous to revert the individual changes, so
this reversion was done manually. Please scrutinise carefully during
review.
# Objective
- dont depend on wgpu if we dont have to
## Solution
- works towards this, but doesnt fully accomplish it. bevy_mesh depends
on bevy_image
## Testing
- 3d_scene runs
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
# Objective
Avoid a premature normalize operation and get better smooth normals for
it.
## Inspiration
@IceSentry suggested `face_normal()` could have its normalize removed
based on [this article](https://iquilezles.org/articles/normals/) in PR
#16039.
## Solution
I did not want to change `face_normal()` to return a vector that's not
normalized. The name "normal" implies it'll be normalized. Instead I
added the `face_area_normal()` function, whose result is not normalized.
Its magnitude is equal two times the triangle's area. I've noted why
this is the case in its doc comment.
I changed `compute_smooth_normals()` from computing normals from
adjacent faces with equal weight to use the area of the faces as a
weight. This has the benefit of being cheaper computationally and
hopefully produces better normals.
The `compute_flat_normals()` is unchanged and still uses
`face_normal()`.
## Testing
One test was added which shows the bigger triangle having an effect on
the normal, but the previous test that uses the same size triangles is
unchanged.
**WARNING:** No visual test has been done yet. No example exists that
demonstrates the compute_smooth_normals(). Perhaps there's a good model
to demonstrate what the differences are. I would love to have some input
on this.
I'd suggest @IceSentry and @stepancheg to review this PR.
## Further Considerations
It's possible weighting normals by their area is not definitely better
than unweighted. It's possible there may be aesthetic reasons to prefer
one over the other. In such a case, we could offer two variants:
weighted or unweighted. Or we could offer another function perhaps like
this: `compute_smooth_normals_with_weights(|normal, area| 1.0)` which
would restore the original unweighted sum of normals.
---
## Showcase
Smooth normal calculation now weights adjacent face normals by their
area.
## Migration Guide
# Objective
- Fixes#16363
- Ensure that someone using minimum version doesn't get the bugs that
were fixed in the 23.0.1 patch
## Solution
- Use wgpu 23.0.1
# Objective
When merging two meshes, we need to find the offset of indices for the
second mesh. Currently it is done by inserting empty positions if
positions is not set.
Although practically it is not an issue, this does not feel right:
- We did not have positions before, then why we have positions after
merge?
- Moreover, if positions are not set, but uvs are not empty, computed
offset will be zero, while it should be equal to the number of uvs.
## Solution
Use `Mesh::count_vertices` to find the number of vertices.
## Testing
Looking hard.
# Objective
There's integer overflow in `Mesh::merge` in branches like this:
405fa3e8ea/crates/bevy_mesh/src/mesh.rs (L857-L859)
we truncate `u32` to `u16` and ignore integer overflow on `u16`. This
may lead to unexpected results when the number of vertices exceeds
`u16::MAX`.
## Solution
Convert indices storage to `u32` when necessary.
## Testing
- Unit test added for `extend` function
- For changes in `Mesh`, I presume it is already tested elsewhere
# Objective
Bevy seems to want to standardize on "American English" spellings. Not
sure if this is laid out anywhere in writing, but see also #15947.
While perusing the docs for `typos`, I noticed that it has a `locale`
config option and tried it out.
## Solution
Switch to `en-us` locale in the `typos` config and run `typos -w`
## Migration Guide
The following methods or fields have been renamed from `*dependants*` to
`*dependents*`.
- `ProcessorAssetInfo::dependants`
- `ProcessorAssetInfos::add_dependant`
- `ProcessorAssetInfos::non_existent_dependants`
- `AssetInfo::dependants_waiting_on_load`
- `AssetInfo::dependants_waiting_on_recursive_dep_load`
- `AssetInfos::loader_dependants`
- `AssetInfos::remove_dependants_and_labels`
# Objective
Making work with `Indices` struct easier. Currently when building
indices in some quick-and-dirty code we need to do matches and handle
enum variants.
## Solution
`Indices::push` utility which works transparently with `U16` and `U32`
variants.
## Testing
Unit test added.
# Objective
- Fixes#15963
## Solution
- Implement `TryFrom<Polygon<N> for ConvexPolygon<N>`
- Implement `From<ConvexPolygon<N>> for Polygon<N>`
- Remove `pub` from `vertices`
- Add `ConvexPolygon::vertices()` to get read only access to the
vertices of a convex polygon.
# Objective
Another clippy-lint fix: the goal is so that `ci lints` actually
displays the problems that a contributor caused, and not a bunch of
existing stuff in the repo. (when run on nightly)
## Solution
This fixes all but the `clippy::needless_lifetimes` lint, which will
result in substantially more fixes and be in other PR(s). I also
explicitly allow `non_local_definitions` since it is [not working
correctly, but will be
fixed](https://github.com/rust-lang/rust/issues/131643).
A few things were manually fixed: for example, some places had an
explicitly defined `div_ceil` function that was used, which is no longer
needed since this function is stable on unsigned integers. Also, empty
lines in doc comments were handled individually.
## Testing
I ran `cargo clippy --workspace --all-targets --all-features --fix
--allow-staged` with the `clippy::needless_lifetimes` lint marked as
`allow` in `Cargo.toml` to avoid fixing that too. It now passes with all
but the listed lint.
# Objective
- As discussed on
[Discord](https://discord.com/channels/691052431525675048/1203087353850364004/1285300659746246849),
implement a `ConvexPolygon` 2D math primitive and associated mesh
builder.
- The original goal was to have a mesh builder for the simplest (i.e.
convex) polygons.
## Solution
- The `ConvexPolygon` is created from its vertices.
- The convexity of the polygon is checked when created via `new()` by
verifying that the winding order of all the triangles formed with
adjacent vertices is the same.
- The `ConvexPolygonMeshBuilder` uses an anchor vertex and goes through
every adjacent pair of vertices in the polygon to form triangles that
fill up the polygon.
## Testing
- Tested locally with my own simple `ConvexPolygonMeshBuilder` usage.
# Objective
- bevy_render is gargantuan
## Solution
- Split out bevy_mesh
## Testing
- Ran some examples, everything looks fine
## Migration Guide
`bevy_render::mesh::morph::inherit_weights` is now
`bevy_render::mesh::inherit_weights`
if you were using `Mesh::compute_aabb`, you will need to `use
bevy_render::mesh::MeshAabb;` now
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
