# Objective
- Fixes#15460 (will open new issues for further `no_std` efforts)
- Supersedes #17715
## Solution
- Threaded in new features as required
- Made certain crates optional but default enabled
- Removed `compile-check-no-std` from internal `ci` tool since GitHub CI
can now simply check `bevy` itself now
- Added CI task to check `bevy` on `thumbv6m-none-eabi` to ensure
`portable-atomic` support is still valid [^1]
[^1]: This may be controversial, since it could be interpreted as
implying Bevy will maintain support for `thumbv6m-none-eabi` going
forward. In reality, just like `x86_64-unknown-none`, this is a
[canary](https://en.wiktionary.org/wiki/canary_in_a_coal_mine) target to
make it clear when `portable-atomic` no longer works as intended (fixing
atomic support on atomically challenged platforms). If a PR comes
through and makes supporting this class of platforms impossible, then
this CI task can be removed. I however wager this won't be a problem.
## Testing
- CI
---
## Release Notes
Bevy now has support for `no_std` directly from the `bevy` crate.
Users can disable default features and enable a new `default_no_std`
feature instead, allowing `bevy` to be used in `no_std` applications and
libraries.
```toml
# Bevy for `no_std` platforms
bevy = { version = "0.16", default-features = false, features = ["default_no_std"] }
```
`default_no_std` enables certain required features, such as `libm` and
`critical-section`, and as many optional crates as possible (currently
just `bevy_state`). For atomically-challenged platforms such as the
Raspberry Pi Pico, `portable-atomic` will be used automatically.
For library authors, we recommend depending on `bevy` with
`default-features = false` to allow `std` and `no_std` users to both
depend on your crate. Here are some recommended features a library crate
may want to expose:
```toml
[features]
# Most users will be on a platform which has `std` and can use the more-powerful `async_executor`.
default = ["std", "async_executor"]
# Features for typical platforms.
std = ["bevy/std"]
async_executor = ["bevy/async_executor"]
# Features for `no_std` platforms.
libm = ["bevy/libm"]
critical-section = ["bevy/critical-section"]
[dependencies]
# We disable default features to ensure we don't accidentally enable `std` on `no_std` targets, for example.
bevy = { version = "0.16", default-features = false }
```
While this is verbose, it gives the maximum control to end-users to
decide how they wish to use Bevy on their platform.
We encourage library authors to experiment with `no_std` support. For
libraries relying exclusively on `bevy` and no other dependencies, it
may be as simple as adding `#![no_std]` to your `lib.rs` and exposing
features as above! Bevy can also provide many `std` types, such as
`HashMap`, `Mutex`, and `Instant` on all platforms. See
`bevy::platform_support` for details on what's available out of the box!
## Migration Guide
- If you were previously relying on `bevy` with default features
disabled, you may need to enable the `std` and `async_executor`
features.
- `bevy_reflect` has had its `bevy` feature removed. If you were relying
on this feature, simply enable `smallvec` and `smol_str` instead.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Contributes to #15460
- Reduce quantity and complexity of feature gates across Bevy
## Solution
- Used `target_has_atomic` configuration variable to automatically
detect impartial atomic support and automatically switch to
`portable-atomic` over the standard library on an as-required basis.
## Testing
- CI
## Notes
To explain the technique employed here, consider getting `Arc` either
from `alloc::sync` _or_ `portable-atomic-util`. First, we can inspect
the `alloc` crate to see that you only have access to `Arc` _if_
`target_has_atomic = "ptr"`. We add a target dependency for this
particular configuration _inverted_:
```toml
[target.'cfg(not(target_has_atomic = "ptr"))'.dependencies]
portable-atomic-util = { version = "0.2.4", default-features = false }
```
This ensures we only have the dependency when it is needed, and it is
entirely excluded from the dependency graph when it is not. Next, we
adjust our configuration flags to instead of checking for `feature =
"portable-atomic"` to instead check for `target_has_atomic = "ptr"`:
```rust
// `alloc` feature flag hidden for brevity
#[cfg(not(target_has_atomic = "ptr"))]
use portable_atomic_util as arc;
#[cfg(target_has_atomic = "ptr")]
use alloc::sync as arc;
pub use arc::{Arc, Weak};
```
The benefits of this technique are three-fold:
1. For platforms without full atomic support, the functionality is
enabled automatically.
2. For platforms with atomic support, the dependency is never included,
even if a feature was enabled using `--all-features` (for example)
3. The `portable-atomic` feature no longer needs to virally spread to
all user-facing crates, it's instead something handled within
`bevy_platform_support` (with some extras where other dependencies also
need their features enabled).
# Objective
- Fixes#17960
## Solution
- Followed the [edition upgrade
guide](https://doc.rust-lang.org/edition-guide/editions/transitioning-an-existing-project-to-a-new-edition.html)
## Testing
- CI
---
## Summary of Changes
### Documentation Indentation
When using lists in documentation, proper indentation is now linted for.
This means subsequent lines within the same list item must start at the
same indentation level as the item.
```rust
/* Valid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
/* Invalid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
```
### Implicit `!` to `()` Conversion
`!` (the never return type, returned by `panic!`, etc.) no longer
implicitly converts to `()`. This is particularly painful for systems
with `todo!` or `panic!` statements, as they will no longer be functions
returning `()` (or `Result<()>`), making them invalid systems for
functions like `add_systems`. The ideal fix would be to accept functions
returning `!` (or rather, _not_ returning), but this is blocked on the
[stabilisation of the `!` type
itself](https://doc.rust-lang.org/std/primitive.never.html), which is
not done.
The "simple" fix would be to add an explicit `-> ()` to system
signatures (e.g., `|| { todo!() }` becomes `|| -> () { todo!() }`).
However, this is _also_ banned, as there is an existing lint which (IMO,
incorrectly) marks this as an unnecessary annotation.
So, the "fix" (read: workaround) is to put these kinds of `|| -> ! { ...
}` closuers into variables and give the variable an explicit type (e.g.,
`fn()`).
```rust
// Valid
let system: fn() = || todo!("Not implemented yet!");
app.add_systems(..., system);
// Invalid
app.add_systems(..., || todo!("Not implemented yet!"));
```
### Temporary Variable Lifetimes
The order in which temporary variables are dropped has changed. The
simple fix here is _usually_ to just assign temporaries to a named
variable before use.
### `gen` is a keyword
We can no longer use the name `gen` as it is reserved for a future
generator syntax. This involved replacing uses of the name `gen` with
`r#gen` (the raw-identifier syntax).
### Formatting has changed
Use statements have had the order of imports changed, causing a
substantial +/-3,000 diff when applied. For now, I have opted-out of
this change by amending `rustfmt.toml`
```toml
style_edition = "2021"
```
This preserves the original formatting for now, reducing the size of
this PR. It would be a simple followup to update this to 2024 and run
`cargo fmt`.
### New `use<>` Opt-Out Syntax
Lifetimes are now implicitly included in RPIT types. There was a handful
of instances where it needed to be added to satisfy the borrow checker,
but there may be more cases where it _should_ be added to avoid
breakages in user code.
### `MyUnitStruct { .. }` is an invalid pattern
Previously, you could match against unit structs (and unit enum
variants) with a `{ .. }` destructuring. This is no longer valid.
### Pretty much every use of `ref` and `mut` are gone
Pattern binding has changed to the point where these terms are largely
unused now. They still serve a purpose, but it is far more niche now.
### `iter::repeat(...).take(...)` is bad
New lint recommends using the more explicit `iter::repeat_n(..., ...)`
instead.
## Migration Guide
The lifetimes of functions using return-position impl-trait (RPIT) are
likely _more_ conservative than they had been previously. If you
encounter lifetime issues with such a function, please create an issue
to investigate the addition of `+ use<...>`.
## Notes
- Check the individual commits for a clearer breakdown for what
_actually_ changed.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
Didn't remove WgpuWrapper. Not sure if it's needed or not still.
## Testing
- Did you test these changes? If so, how? Example runner
- Are there any parts that need more testing? Web (portable atomics
thingy?), DXC.
## Migration Guide
- Bevy has upgraded to [wgpu
v24](https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md#v2400-2025-01-15).
- When using the DirectX 12 rendering backend, the new priority system
for choosing a shader compiler is as follows:
- If the `WGPU_DX12_COMPILER` environment variable is set at runtime, it
is used
- Else if the new `statically-linked-dxc` feature is enabled, a custom
version of DXC will be statically linked into your app at compile time.
- Else Bevy will look in the app's working directory for
`dxcompiler.dll` and `dxil.dll` at runtime.
- Else if they are missing, Bevy will fall back to FXC (not recommended)
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IceSentry <c.giguere42@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- Fixes CI failure due to `uuid` 1.13 using the new version of
`getrandom` which requires using a new API to work on Wasm.
## Solution
- Based on [`uuid` 1.13 release
notes](https://github.com/uuid-rs/uuid/releases/tag/1.13.0) I've enabled
the `js` feature on `wasm32`. This will need to be revisited once #17499
is up for review
- Updated minimum `uuid` version to 1.13.1, which fixes a separate issue
with `target_feature = atomics` on `wasm`.
## Testing
- `cargo check --target wasm32-unknown-unknown`
# Objective
- Contributes to #16877
## Solution
- Moved `hashbrown`, `foldhash`, and related types out of `bevy_utils`
and into `bevy_platform_support`
- Refactored the above to match the layout of these types in `std`.
- Updated crates as required.
## Testing
- CI
---
## Migration Guide
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::hash`:
- `FixedState`
- `DefaultHasher`
- `RandomState`
- `FixedHasher`
- `Hashed`
- `PassHash`
- `PassHasher`
- `NoOpHash`
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::collections`:
- `HashMap`
- `HashSet`
- `bevy_utils::hashbrown` has been removed. Instead, import from
`bevy_platform_support::collections` _or_ take a dependency on
`hashbrown` directly.
- `bevy_utils::Entry` has been removed. Instead, import from
`bevy_platform_support::collections::hash_map` or
`bevy_platform_support::collections::hash_set` as appropriate.
- All of the above equally apply to `bevy::utils` and
`bevy::platform_support`.
## Notes
- I left `PreHashMap`, `PreHashMapExt`, and `TypeIdMap` in `bevy_utils`
as they might be candidates for micro-crating. They can always be moved
into `bevy_platform_support` at a later date if desired.
# Objective
- Contributes to #16877
## Solution
- Expanded `bevy_platform_support::sync` module to provide
API-compatible replacements for `std` items such as `RwLock`, `Mutex`,
and `OnceLock`.
- Removed `spin` from all crates except `bevy_platform_support`.
## Testing
- CI
---
## Notes
- The sync primitives, while verbose, entirely rely on `spin` for their
implementation requiring no `unsafe` and not changing the status-quo on
_how_ locks actually work within Bevy. This is just a refactoring to
consolidate the "hacks" and workarounds required to get a consistent
experience when either using `std::sync` or `spin`.
- I have opted to rely on `std::sync` for `std` compatible locks,
maintaining the status quo. However, now that we have these locks
factored out into the own module, it would be trivial to investigate
alternate locking backends, such as `parking_lot`.
- API for these locking types is entirely based on `std`. I have
implemented methods and types which aren't currently in use within Bevy
(e.g., `LazyLock` and `Once`) for the sake of completeness. As the
standard library is highly stable, I don't expect the Bevy and `std`
implementations to drift apart much if at all.
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
- Contributes to #16877
## Solution
- Initial creation of `bevy_platform_support` crate.
- Moved `bevy_utils::Instant` into new `bevy_platform_support` crate.
- Moved `portable-atomic`, `portable-atomic-util`, and
`critical-section` into new `bevy_platform_support` crate.
## Testing
- CI
---
## Showcase
Instead of needing code like this to import an `Arc`:
```rust
#[cfg(feature = "portable-atomic")]
use portable_atomic_util::Arc;
#[cfg(not(feature = "portable-atomic"))]
use alloc::sync::Arc;
```
We can now use:
```rust
use bevy_platform_support::sync::Arc;
```
This applies to many other types, but the goal is overall the same:
allowing crates to use `std`-like types without the boilerplate of
conditional compilation and platform-dependencies.
## Migration Guide
- Replace imports of `bevy_utils::Instant` with
`bevy_platform_support::time::Instant`
- Replace imports of `bevy::utils::Instant` with
`bevy::platform_support::time::Instant`
## Notes
- `bevy_platform_support` hasn't been reserved on `crates.io`
- ~~`bevy_platform_support` is not re-exported from `bevy` at this time.
It may be worthwhile exporting this crate, but I am unsure of a
reasonable name to export it under (`platform_support` may be a bit
wordy for user-facing).~~
- I've included an implementation of `Instant` which is suitable for
`no_std` platforms that are not Wasm for the sake of eliminating feature
gates around its use. It may be a controversial inclusion, so I'm happy
to remove it if required.
- There are many other items (`spin`, `bevy_utils::Sync(Unsafe)Cell`,
etc.) which should be added to this crate. I have kept the initial scope
small to demonstrate utility without making this too unwieldy.
---------
Co-authored-by: TimJentzsch <TimJentzsch@users.noreply.github.com>
Co-authored-by: Chris Russell <8494645+chescock@users.noreply.github.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective & Solution
- Update `downcast-rs` to the latest version, 2.
- Disable (new) `sync` feature to improve compatibility with atomically
challenged platforms.
- Remove stub `downcast-rs` alternative code from `bevy_app`
## Testing
- CI
## Notes
The only change from version 1 to version 2 is the addition of a new
`sync` feature, which allows disabling the `DowncastSync` parts of
`downcast-rs`, which require access to `alloc::sync::Arc`, which is not
available on atomically challenged platforms. Since Bevy makes no use of
the functionality provided by the `sync` feature, I've disabled it in
all crates. Further details can be found
[here](https://github.com/marcianx/downcast-rs/pull/22).
Bump version after release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
Simplify the code by using `macro_rules` instead of a proc macro where
possible.
## Solution
Replace `impl_param_set` proc macro with a `macro_rules` macro.
Updating dependencies; adopted version of #15696. (Supercedes #15696.)
Long answer: hashbrown is no longer using ahash by default, meaning that
we can't use the default-hasher methods with ahasher. So, we have to use
the longer-winded versions instead. This takes the opportunity to also
switch our default hasher as well, but without actually enabling the
default-hasher feature for hashbrown, meaning that we'll be able to
change our hasher more easily at the cost of all of these method calls
being obnoxious forever.
One large change from 0.15 is that `insert_unique_unchecked` is now
`unsafe`, and for cases where unsafe code was denied at the crate level,
I replaced it with `insert`.
## Migration Guide
`bevy_utils` has updated its version of `hashbrown` to 0.15 and now
defaults to `foldhash` instead of `ahash`. This means that if you've
hard-coded your hasher to `bevy_utils::AHasher` or separately used the
`ahash` crate in your code, you may need to switch to `foldhash` to
ensure that everything works like it does in Bevy.
# Objective
- Remove `derive_more`'s error derivation and replace it with
`thiserror`
## Solution
- Added `derive_more`'s `error` feature to `deny.toml` to prevent it
sneaking back in.
- Reverted to `thiserror` error derivation
## Notes
Merge conflicts were too numerous to revert the individual changes, so
this reversion was done manually. Please scrutinise carefully during
review.
# Objective
- Contributes to #15460
## Solution
- Added `std` feature (enabled by default)
## Testing
- CI
- `cargo check -p bevy_reflect --no-default-features --target
"x86_64-unknown-none"`
- UEFI demo application runs with this branch of `bevy_reflect`,
allowing `derive(Reflect)`
## Notes
- The [`spin`](https://crates.io/crates/spin) crate has been included to
provide `RwLock` and `Once` (as an alternative to `OnceLock`) when the
`std` feature is not enabled. Another alternative may be more desirable,
please provide feedback if you have a strong opinion here!
- Certain items (`Box`, `String`, `ToString`) provided by `alloc` have
been added to `__macro_exports` as a way to avoid `alloc` vs `std`
namespacing. I'm personally quite annoyed that we can't rely on `alloc`
as a crate name in `std` environments within macros. I'd love an
alternative to my approach here, but I suspect it's the least-bad
option.
- I would've liked to have an `alloc` feature (for allocation-free
`bevy_reflect`), unfortunately, `erased_serde` unconditionally requires
access to `Box`. Maybe one day we could design around this, but for now
it just means `bevy_reflect` requires `alloc`.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#15941
## Solution
Created https://crates.io/crates/variadics_please and moved the code
there; updating references
`bevy_utils/macros` is deleted.
## Testing
cargo check
## Migration Guide
Use `variadics_please::{all_tuples, all_tuples_with_size}` instead of
`bevy::utils::{all_tuples, all_tuples_with_size}`.
# Objective
MSRV in the standalone crates should be accurate
## Solution
Determine the msrv of each crate and set it
## Testing
Adding better msrv checks to the CI is a next-step.
# Objective
#15349 added an `impl_reflect!` for `glam::EulerRot`. This was done by
copying and pasting the enum definition from `glam` into `bevy_reflect`
so that the macro could interpret the variants.
However, as mentioned in the description for that PR, this would need to
be updated for `glam` 0.29, as it had not been updated yet.
#15249 came and updated `glam` to 0.29, but did not change these impls.
This is understandable as failing to do so doesn't cause any compile
errors.
This PR updates the definition and aims to make this silent breakage a
little less silent.
## Solution
Firstly, I updated the definition for `EulerRot` to match the one from
`glam`.
Secondly, I added the `assert_type_match` crate, which I created
specifically to solve this problem. By using this crate, we'll get a
compile time error if `glam` ever decides to change `EulerRot` again.
In the future we can consider using it for other types with this
problem, including in other crates (I'm pretty sure `bevy_window` and/or
`bevy_winit` also copy+paste some types). I made sure to use as few
dependencies as possible so everything should already be in-tree (it's
just `quote`, `proc-macro2`, and `syn` with default features).
## Testing
No tests added. CI should pass.
---
## Migration Guide
The reflection implementation for `EulerRot` has been updated to align
with `glam` 0.29. Please update any reflection-based usages accordingly.
# Objective
Updating ``glam`` to 0.29, ``encase`` to 0.10.
## Solution
Update the necessary ``Cargo.toml`` files.
## Testing
Ran ``cargo run -p ci`` on Windows; no issues came up.
---------
Co-authored-by: aecsocket <aecsocket@tutanota.com>
# Objective
Fixes#15351
## Solution
- Created new external crate and ported over the code
## Testing
- CI
## Migration guide
Replace references to `bevy_utils::ShortName` with
`disqualified::ShortName`.
# Objective
In order to derive `Reflect`, all of a struct's fields must implement
`FromReflect`. [As part of looking into some of the work mentioned
here](https://github.com/bevyengine/bevy/issues/13713#issuecomment-2364786694),
I noticed that `TextureFormat` doesn't implement `Reflect`, and decided
to split that into a separate PR.
## Solution
I decided that `TextureFormat` should be a `reflect_value` since,
although one variant has fields, most users will treat this as an opaque
value set explicitly. It also substantially reduces the complexity of
the implementation.
For now, this implementation isn't actually used by any crates, so, I
decided to not preemptively enable the feature on anything. But it's
technically an option, now, and more `wgpu` types can be added in the
future.
## Testing
Everything compiles okay, and I can't really see how this could be done
incorrectly given the above constraints.
# Objective
- Goal is to minimize bevy_utils #11478
## Solution
- Move the file short_name wholesale into bevy_reflect
## Testing
- Unit tests
- CI
## Migration Guide
- References to `bevy_utils::ShortName` should instead now be
`bevy_reflect::ShortName`.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Reflection serialization can be difficult to debug. A lot of times a
type fails to be serialized and the user is left wondering where that
type came from.
This is most often encountered with Bevy's scenes. Attempting to
serialize all resources in the world will fail because some resources
can't be serialized.
For example, users will often get complaints about `bevy_utils::Instant`
not registering `ReflectSerialize`. Well, `Instant` can't be serialized,
so the only other option is to exclude the resource that contains it.
But what resource contains it? This is where reflection serialization
can get a little tricky (it's `Time<Real>` btw).
## Solution
Add the `debug_stack` feature to `bevy_reflect`. When enabled, the
reflection serializers and deserializers will keep track of the current
type stack. And this stack will be used in error messages to help with
debugging.
Now, if we unknowingly try to serialize `Time<Real>`, we'll get the
following error:
```
type `bevy_utils::Instant` did not register the `ReflectSerialize` type data. For certain types, this may need to be registered manually using `register_type_data` (stack: `bevy_time::time::Time<bevy_time::real::Real>` -> `bevy_time::real::Real` -> `bevy_utils::Instant`)
```
### Implementation
This makes use of `thread_local!` to manage an internal `TypeInfoStack`
which holds a stack of `&'static TypeInfo`. We push to the stack before
a type is (de)serialized and pop from the stack afterwards.
Using a thread-local should be fine since we know two (de)serializers
can't be running at the same time (and if they're running on separate
threads, then we're still good).
The only potential issue would be if a user went through one of the
sub-serializers, like `StructSerializer`. However, I don't think many
users are going through these types (I don't even know if we necessarily
want to keep those public either, but we'll save that for a different
PR). Additionally, this is just a debug feature that only affects error
messages, so it wouldn't have any drastically negative effect. It would
just result in the stack not being cleared properly if there were any
errors.
Lastly, this is not the most performant implementation since we now
fetch the `TypeInfo` an extra time. But I figured that for a debug tool,
it wouldn't matter too much.
### Feature
This also adds a `debug` feature, which enables the `debug_stack`
feature.
I added it because I think we may want to potentially add more debug
tools in the future, and this gives us a good framework for adding
those. Users who want all debug features, present and future, can just
set `debug`. If they only want this feature, then they can just use
`debug_stack`.
I also made the `debug` feature default to help capture the widest
audience (i.e. the users who want this feature but don't know they do).
However, if we think it's better as a non-default feature, I can change
it!
And if there's any bikeshedding around the name `debug_stack`, let me
know!
## Testing
Run the following command:
```
cargo test --package bevy_reflect --features debug_stack
```
---
## Changelog
- Added the `debug` and `debug_stack` features to `bevy_reflect`
- Updated the error messages returned by the reflection serializers and
deserializers to include more contextual information when the
`debug_stack` or `debug` feature is enabled
# Objective
- Fixes#14969
## Solution
- Added `Deserialize` to the list of reflected traits for `SmolStr`
## Testing
- CI passed locally.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Basically it's https://github.com/bevyengine/bevy/pull/13792 with the
bumped versions of `encase` and `hexasphere`.
---------
Co-authored-by: Robert Swain <robert.swain@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fix issue #2611
## Solution
- Add `--generate-link-to-definition` to all the `rustdoc-args` arrays
in the `Cargo.toml`s (for docs.rs)
- Add `--generate-link-to-definition` to the `RUSTDOCFLAGS` environment
variable in the docs workflow (for dev-docs.bevyengine.org)
- Document all the workspace crates in the docs workflow (needed because
otherwise only the source code of the `bevy` package will be included,
making the argument useless)
- I think this also fixes#3662, since it fixes the bug on
dev-docs.bevyengine.org, while on docs.rs it has been fixed for a while
on their side.
---
## Changelog
- The source code viewer on docs.rs now includes links to the
definitions.
# Objective
Function reflection requires a lot of macro code generation in the form
of several `all_tuples!` invocations, as well as impls generated in the
`Reflect` derive macro.
Seeing as function reflection is currently a bit more niche, it makes
sense to gate it all behind a feature.
## Solution
Add a `functions` feature to `bevy_reflect`, which can be enabled in
Bevy using the `reflect_functions` feature.
## Testing
You can test locally by running:
```
cargo test --package bevy_reflect
```
That should ensure that everything still works with the feature
disabled.
To test with the feature on, you can run:
```
cargo test --package bevy_reflect --features functions
```
---
## Changelog
- Moved function reflection behind a Cargo feature
(`bevy/reflect_functions` and `bevy_reflect/functions`)
- Add `IntoFunction` export in `bevy_reflect::prelude`
## Internal Migration Guide
> [!important]
> Function reflection was introduced as part of the 0.15 dev cycle. This
migration guide was written for developers relying on `main` during this
cycle, and is not a breaking change coming from 0.14.
Function reflection is now gated behind a feature. To use function
reflection, enable the feature:
- If using `bevy_reflect` directly, enable the `functions` feature
- If using `bevy`, enable the `reflect_functions` feature
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
Fixes#13456
## Solution
Moved `bevy_math`'s `Reflect` impls from `bevy_reflect` to `bevy_math`.
### Quick note
I accidentally used the same commit message while resolving a merge
conflict (first time I had to resolve a conflict). Sorry about that.
# Objective
As was pointed out in #13183, `bevy_mikktspace` is missing it's msrv
from it `Cargo.toml`. This promted me to check the msrv of every
`bevy_*` crate. Closes#13183.
## Solution
- Call `cargo check` with different rust versions on every bevy crate
until it doesn't complain.
- Write down the rust version `cargo check` started working.
## Testing
- Install `cargo-msrv`.
- Run `cargo msrv verify`.
- Rejoice.
---
## Changelog
Every published bevy crate now specifies a MSRV. If your rust toolchain
isn't at least version `1.77.0` You'll likely not be able to compile
most of bevy.
## Migration Guide
If your rust toolchain is bellow version`1.77.0, update.
# Objective
- Some of the "large" crates have sub-crates, usually for things such as
macros.
- For an example, see [`bevy_ecs_macros` at
`bevy_ecs/macros`](4f9f987099/crates/bevy_ecs/macros).
- The one crate that does not follow this convention is
[`bevy_reflect_derive`](4f9f987099/crates/bevy_reflect/bevy_reflect_derive),
which is in the `bevy_reflect/bevy_reflect_derive` folder and not
`bevy_reflect/derive` or `bevy_reflect/macros`.
## Solution
- Rename folder `bevy_reflect_derive` to `derive`.
- I chose to use `derive` instead of `macros` because the crate name
itself ends in `_derive`. (One of only two crates to actually use this
convention, funnily enough.)
## Testing
- Build and test `bevy_reflect` and `bevy_reflect_derive`.
- Apply the following patch to `publish.sh` to run it in `--dry-run`
mode, to test that the path has been successfully updated:
- If you have any security concerns about applying random diffs, feel
free to skip this step. Worst case scenario it fails and Cart has to
manually publish a few crates.
```bash
# Apply patch to make `publish.sh` *not* actually publish anything.
git apply path/to/foo.patch
# Make `publish.sh` executable.
chmod +x tools/publish.sh
# Execute `publish.sh`.
./tools/publish.sh
```
```patch
diff --git a/tools/publish.sh b/tools/publish.sh
index b020bad28..fbcc09281 100644
--- a/tools/publish.sh
+++ b/tools/publish.sh
@@ -49,7 +49,7 @@ crates=(
if [ -n "$(git status --porcelain)" ]; then
echo "You have local changes!"
- exit 1
+ # exit 1
fi
pushd crates
@@ -61,15 +61,15 @@ do
cp ../LICENSE-APACHE "$crate"
pushd "$crate"
git add LICENSE-MIT LICENSE-APACHE
- cargo publish --no-verify --allow-dirty
+ cargo publish --no-verify --allow-dirty --dry-run
popd
- sleep 20
+ # sleep 20
done
popd
echo "Publishing root crate"
-cargo publish --allow-dirty
+cargo publish --allow-dirty --dry-run
echo "Cleaning local state"
git reset HEAD --hard
```
---
## Changelog
- Moved `bevy_reflect_derive` from
`crates/bevy_reflect/bevy_reflect_derive` to
`crates/bevy_reflect/derive`.
# Objective
- `README.md` is a common file that usually gives an overview of the
folder it is in.
- When on <https://crates.io>, `README.md` is rendered as the main
description.
- Many crates in this repository are lacking `README.md` files, which
makes it more difficult to understand their purpose.
<img width="1552" alt="image"
src="https://github.com/bevyengine/bevy/assets/59022059/78ebf91d-b0c4-4b18-9874-365d6310640f">
- There are also a few inconsistencies with `README.md` files that this
PR and its follow-ups intend to fix.
## Solution
- Create a `README.md` file for all crates that do not have one.
- This file only contains the title of the crate (underscores removed,
proper capitalization, acronyms expanded) and the <https://shields.io>
badges.
- Remove the `readme` field in `Cargo.toml` for `bevy` and
`bevy_reflect`.
- This field is redundant because [Cargo automatically detects
`README.md`
files](https://doc.rust-lang.org/cargo/reference/manifest.html#the-readme-field).
The field is only there if you name it something else, like `INFO.md`.
- Fix capitalization of `bevy_utils`'s `README.md`.
- It was originally `Readme.md`, which is inconsistent with the rest of
the project.
- I created two commits renaming it to `README.md`, because Git appears
to be case-insensitive.
- Expand acronyms in title of `bevy_ptr` and `bevy_utils`.
- In the commit where I created all the new `README.md` files, I
preferred using expanded acronyms in the titles. (E.g. "Bevy Developer
Tools" instead of "Bevy Dev Tools".)
- This commit changes the title of existing `README.md` files to follow
the same scheme.
- I do not feel strongly about this change, please comment if you
disagree and I can revert it.
- Add <https://shields.io> badges to `bevy_time` and `bevy_transform`,
which are the only crates currently lacking them.
---
## Changelog
- Added `README.md` files to all crates missing it.
# Objective
- Update glam version requirement to latest version.
## Solution
- Updated `glam` version requirement from 0.25 to 0.27.
- Updated `encase` and `encase_derive_impl` version requirement from 0.7
to 0.8.
- Updated `hexasphere` version requirement from 10.0 to 12.0.
- Breaking changes from glam changelog:
- [0.26.0] Minimum Supported Rust Version bumped to 1.68.2 for impl
From<bool> for {f32,f64} support.
- [0.27.0] Changed implementation of vector fract method to match the
Rust implementation instead of the GLSL implementation, that is self -
self.trunc() instead of self - self.floor().
---
## Migration Guide
- When using `glam` exports, keep in mind that `vector` `fract()` method
now matches Rust implementation (that is `self - self.trunc()` instead
of `self - self.floor()`). If you want to use the GLSL implementation
you should now use `fract_gl()`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fix missing `TextBundle` (and many others) which are present in the main
crate as default features but optional in the sub-crate. See:
- https://docs.rs/bevy/0.13.0/bevy/ui/node_bundles/index.html
- https://docs.rs/bevy_ui/0.13.0/bevy_ui/node_bundles/index.html
~~There are probably other instances in other crates that I could track
down, but maybe "all-features = true" should be used by default in all
sub-crates? Not sure.~~ (There were many.) I only noticed this because
rust-analyzer's "open docs" features takes me to the sub-crate, not the
main one.
## Solution
Add "all-features = true" to docs.rs metadata for crates that use
features.
## Changelog
### Changed
- Unified features documented on docs.rs between main crate and
sub-crates
This is an implementation of RFC #51:
https://github.com/bevyengine/rfcs/blob/main/rfcs/51-animation-composition.md
Note that the implementation strategy is different from the one outlined
in that RFC, because two-phase animation has now landed.
# Objective
Bevy needs animation blending. The RFC for this is [RFC 51].
## Solution
This is an implementation of the RFC. Note that the implementation
strategy is different from the one outlined there, because two-phase
animation has now landed.
This is just a draft to get the conversation started. Currently we're
missing a few things:
- [x] A fully-fleshed-out mechanism for transitions
- [x] A serialization format for `AnimationGraph`s
- [x] Examples are broken, other than `animated_fox`
- [x] Documentation
---
## Changelog
### Added
* The `AnimationPlayer` has been reworked to support blending multiple
animations together through an `AnimationGraph`, and as such will no
longer function unless a `Handle<AnimationGraph>` has been added to the
entity containing the player. See [RFC 51] for more details.
* Transition functionality has moved from the `AnimationPlayer` to a new
component, `AnimationTransitions`, which works in tandem with the
`AnimationGraph`.
## Migration Guide
* `AnimationPlayer`s can no longer play animations by themselves and
need to be paired with a `Handle<AnimationGraph>`. Code that was using
`AnimationPlayer` to play animations will need to create an
`AnimationGraph` asset first, add a node for the clip (or clips) you
want to play, and then supply the index of that node to the
`AnimationPlayer`'s `play` method.
* The `AnimationPlayer::play_with_transition()` method has been removed
and replaced with the `AnimationTransitions` component. If you were
previously using `AnimationPlayer::play_with_transition()`, add all
animations that you were playing to the `AnimationGraph`, and create an
`AnimationTransitions` component to manage the blending between them.
[RFC 51]:
https://github.com/bevyengine/rfcs/blob/main/rfcs/51-animation-composition.md
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
Make bevy_utils less of a compilation bottleneck. Tackle #11478.
## Solution
* Move all of the directly reexported dependencies and move them to
where they're actually used.
* Remove the UUID utilities that have gone unused since `TypePath` took
over for `TypeUuid`.
* There was also a extraneous bytemuck dependency on `bevy_core` that
has not been used for a long time (since `encase` became the primary way
to prepare GPU buffers).
* Remove the `all_tuples` macro reexport from bevy_ecs since it's
accessible from `bevy_utils`.
---
## Changelog
Removed: Many of the reexports from bevy_utils (petgraph, uuid, nonmax,
smallvec, and thiserror).
Removed: bevy_core's reexports of bytemuck.
## Migration Guide
bevy_utils' reexports of petgraph, uuid, nonmax, smallvec, and thiserror
have been removed.
bevy_core' reexports of bytemuck's types has been removed.
Add them as dependencies in your own crate instead.
Fixes#12016.
Bump version after release
This PR has been auto-generated
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François <mockersf@gmail.com>
Updates the requirements on
[erased-serde](https://github.com/dtolnay/erased-serde) to permit the
latest version.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/erased-serde/releases">erased-serde's
releases</a>.</em></p>
<blockquote>
<h2>0.4.2</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="8f555a2db2"><code>8f555a2</code></a>
Release 0.4.2</li>
<li><a
href="450a9108fc"><code>450a910</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="4726cdb49d"><code>4726cdb</code></a>
Release 0.4.1</li>
<li><a
href="4e04e70902"><code>4e04e70</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/101">#101</a>
from dtolnay/sererror</li>
<li><a
href="c670c72da5"><code>c670c72</code></a>
Preserve error message of errors originated from Serialize impl</li>
<li><a
href="6893670cca"><code>6893670</code></a>
Ignore box_collection clippy lint</li>
<li><a
href="7ddf6aadd8"><code>7ddf6aa</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/100">#100</a>
from KodrAus/fix/failing-serialize-impl</li>
<li><a
href="8227d20573"><code>8227d20</code></a>
handle the case where a Serialize fails without calling the
Serializer</li>
<li><a
href="160c15393e"><code>160c153</code></a>
Release 0.4.0</li>
<li><a
href="2e48977019"><code>2e48977</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/erased-serde/issues/99">#99</a>
from dtolnay/bench</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/erased-serde/compare/0.3.0...0.4.2">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- Implement common traits on primitives
## Solution
- Derive PartialEq on types that were missing it.
- Derive Copy on small types that were missing it.
- Derive Serialize/Deserialize if the feature on bevy_math is enabled.
- Add a lot of cursed stuff to the bevy_reflect `impls` module.
# Objective
- Address junk leftover by TypeUuid removal
## Solution
- Get rid of unused deps and imports
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
TypeUuid is deprecated, remove it.
## Migration Guide
Convert any uses of `#[derive(TypeUuid)]` with `#[derive(TypePath]` for
more complex uses see the relevant
[documentation](https://docs.rs/bevy/latest/bevy/prelude/trait.TypePath.html)
for more information.
---------
Co-authored-by: ebola <dev@axiomatic>
# Objective
- Tests are manually checking whether derived types implement certain
traits. (Specifically in `bevy_reflect.)
- #11182 introduces
[`static_assertions`](https://docs.rs/static_assertions/) to
automatically check this.
- Simplifies `Reflect` test in #11195.
- Closes#11196.
## Solution
- Add `static_assertions` and replace current tests.
---
I wasn't sure whether to remove the existing test or not. What do you
think?
Update to `glam` 0.25, `encase` 0.7 and `hexasphere` to 10.0
## Changelog
Added the `FloatExt` trait to the `bevy_math` prelude which adds `lerp`,
`inverse_lerp` and `remap` methods to the `f32` and `f64` types.
Matches versioning & features from other Cargo.toml files in the
project.
# Objective
Resolves#10932
## Solution
Added smallvec to the bevy_utils cargo.toml and added a line to
re-export the crate. Target version and features set to match what's
used in the other bevy crates.
# Objective
- Fix#10499
## Solution
- Use `.get_represented_type_info()` module path and type ident instead
of `.reflect_*` module path and type ident when serializing the `Option`
enum
---
## Changelog
- Fix serialization bug
- Add simple test
- Add `serde_json` dev dependency
- Add `serde` with `derive` feature dev dependency (wouldn't compile for
me without it)
---------
Co-authored-by: hank <hank@hank.co.in>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
