# Objective
Fixes#16104
## Solution
I removed all instances of `:?` and put them back one by one where it
caused an error.
I removed some bevy_utils helper functions that were only used in 2
places and don't add value. See: #11478
## Testing
CI should catch the mistakes
## Migration Guide
`bevy::utils::{dbg,info,warn,error}` were removed. Use
`bevy::utils::tracing::{debug,info,warn,error}` instead.
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
# Objective
This PR implements `FromStr` for `Val`, so developers can parse values
like `10px` and `50%`
## Testing
Added tests for this. I think they cover pretty much everything, and
it's a fairly simple unit test.
## Limitations
Currently the following float values are not parsed:
- `inf`, `-inf`, `+infinity`, `NaN`
- `2.5E10`, `2.5e10`, `2.5E-10`
For my use case this is perfectly fine but other developers might want
to support these values
# Objective
Some types like `RenderEntity` and `MainEntity` are just wrappers around
`Entity`, so they should be able to implement
`EntityBorrow`/`TrustedEntityBorrow`. This allows using them with
`EntitySet` functionality.
The `EntityRef` family are more than direct wrappers around `Entity`,
but can still benefit from being unique in a collection.
## Solution
Implement `EntityBorrow` and `TrustedEntityBorrow` for simple `Entity`
newtypes and `EntityRef` types.
These impls are an explicit decision to have the `EntityRef` types
compare like just `Entity`.
`EntityWorldMut` is omitted from this impl, because it explicitly
contains a `&mut World` as well, and we do not ever use more than one at
a time.
Add `EntityBorrow` to the `bevy_ecs` prelude.
## Migration Guide
`NormalizedWindowRef::entity` has been replaced with an
`EntityBorrow::entity` impl.
# Objective
Allow users to enable or disable layout rounding for specific UI nodes
and their descendants.
Fixes#16731
## Solution
New component `LayoutConfig` that can be added to any UiNode entity.
Setting the `use_rounding` field of `LayoutConfig` determines if the
Node and its descendants should be given rounded or unrounded
coordinates.
## Testing
Not tested this extensively but it seems to work and it's not very
complicated.
This really basic test app returns fractional coords:
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Startup, setup)
.add_systems(Update, report)
.run();
}
fn setup(mut commands: Commands) {
commands.spawn(Camera2d);
commands.spawn((
Node {
left: Val::Px(0.1),
width: Val::Px(100.1),
height: Val::Px(100.1),
..Default::default()
},
LayoutConfig { use_rounding: false },
));
}
fn report(node: Query<(Ref<ComputedNode>, &GlobalTransform)>) {
for (c, g) in node.iter() {
if c.is_changed() {
println!("{:#?}", c);
println!("position = {:?}", g.to_scale_rotation_translation().2);
}
}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
When preparing `GpuImage`s, we currently discard the
`depth_or_array_layers` of the `Image`'s size by converting it into a
`UVec2`.
Fixes#16715.
## Solution
Change `GpuImage::size` to `Extent3d`, and just pass that through when
creating `GpuImage`s.
Also copy the `aspect_ratio`, and `size` (now `size_2d` for
disambiguation from the field) functions from `Image` to `GpuImage` for
ease of use with 2D textures.
I originally copied all size-related functions (like `width`, and
`height`), but i think they are unnecessary considering how visible the
`size` field on `GpuImage` is compared to `Image`.
## Testing
Tested via `cargo r -p ci` for everything except docs, when generating
docs it keeps spitting out a ton of
```
error[E0554]: `#![feature]` may not be used on the stable release channel
--> crates/bevy_dylib/src/lib.rs:1:21
|
1 | #![cfg_attr(docsrs, feature(doc_auto_cfg))]
|
```
Not sure why this is happening, but it also happens without my changes,
so it's almost certainly some strange issue specific to my machine.
## Migration Guide
- `GpuImage::size` is now an `Extent3d`. To easily get 2D size, use
`size_2d()`.
Currently, `check_visibility` is parameterized over a query filter that
specifies the type of potentially-visible object. This has the
unfortunate side effect that we need a separate system,
`mark_view_visibility_as_changed_if_necessary`, to trigger view
visibility change detection. That system is quite slow because it must
iterate sequentially over all entities in the scene.
This PR moves the query filter from `check_visibility` to a new
component, `VisibilityClass`. `VisibilityClass` stores a list of type
IDs, each corresponding to one of the query filters we used to use.
Because `check_visibility` is no longer specialized to the query filter
at the type level, Bevy now only needs to invoke it once, leading to
better performance as `check_visibility` can do change detection on the
fly rather than delegating it to a separate system.
This commit also has ergonomic improvements, as there's no need for
applications that want to add their own custom renderable components to
add specializations of the `check_visibility` system to the schedule.
Instead, they only need to ensure that the `ViewVisibility` component is
properly kept up to date. The recommended way to do this, and the way
that's demonstrated in the `custom_phase_item` and
`specialized_mesh_pipeline` examples, is to make `ViewVisibility` a
required component and to add the type ID to it in a component add hook.
This patch does this for `Mesh3d`, `Mesh2d`, `Sprite`, `Light`, and
`Node`, which means that most app code doesn't need to change at all.
Note that, although this patch has a large impact on the performance of
visibility determination, it doesn't actually improve the end-to-end
frame time of `many_cubes`. That's because the render world was already
effectively hiding the latency from
`mark_view_visibility_as_changed_if_necessary`. This patch is, however,
necessary for *further* improvements to `many_cubes` performance.
`many_cubes` trace before:
`many_cubes` trace after:
## Migration Guide
* `check_visibility` no longer takes a `QueryFilter`, and there's no
need to add it manually to your app schedule anymore for custom
rendering items. Instead, entities with custom renderable components
should add the appropriate type IDs to `VisibilityClass`. See
`custom_phase_item` for an example.
# Objective
- Enable modifying node size after layout.
- Gain access to a node's content_size. `UiSurface` is a private type so
content size can't be looked up.
## Solution
- Make `ComputedNode` fields public.
- Add `content_size` to `ComputedNode`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Scroll position uses physical coordinates. This means scrolling may go
faster or slower depending on the scroll factor. Also the scrolled
position will change when the scale factor changes.
## Solution
In `ui_layout_system` convert `max_possible_offset` to logical
coordinates before clamping the scroll position. Then convert the
clamped scroll position to physical coordinates before propagating it to
the node's children.
## Testing
Look at the `scroll` example. On main if you change your display's scale
factor the items displayed by the scrolling lists will change because
`ScrollPosition`'s displacement values don't respect scale factor. With
this PR the displacement will be scaled too, and the won't move.
# Objective
We were waiting for 1.83 to address most of these, due to a bug with
`missing_docs` and `expect`. Relates to, but does not entirely complete,
#15059.
## Solution
- Upgrade to 1.83
- Switch `allow(missing_docs)` to `expect(missing_docs)`
- Remove a few now-unused `allow`s along the way, or convert to `expect`
# Objective
Fixes#16659
## Solution
- I just added all the `#[reflect(Component)]` attributes where
necessary.
## Testing
I wrote a small program that scans the bevy code for all structs and
enums that derive `Component` and `Reflect`, but don't have the
attribute `#[reflect(Component)]`.
I don't know if this testing program should be part of the testing suite
of bevy. It takes a bit of time to scan the whole codebase. In any case,
I've published it [here](https://github.com/anlumo/bevy-reflect-check).
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Destructuring in const code blocks isn't allowed, thus using UIRect in
const code can be a hassle as it initialisation function aren't const.
This Pr makes them const.
## Solution
Removed all destructuring in the UIRect implementation
## Testing
- I've ran a few ui examples to check if i didn't make a mistake,
---
# Objective
Fixes#16771
## Solution
Fixed typo in code.
## Testing
- Did you test these changes? If so, how?
I tested on my own example, that I included in the issue. It was
behaving as I expected.
Here is the screenshot after fix, the screenshot before the fix can be
found in the issue.
# Objective
The doc comments and function namings for `BorderRect` feel imprecise to
me. Particularly the `square` function which is used to define a uniform
`BorderRect` with equal widths on each edge. But this is potentially
confusing since this "square" border could be around an oblong shape.
Using "padding" to refer to the border extents seems undesirable too
since "padding" is typically used to refer to the area between border
and content, not the border itself.
## Solution
* Rename `square` to `all` (this matches the name of the similar method
on `UiRect`).
* Rename `rectangle` to `axes` (this matches the name of the similar
method on `UiRect`).
* Update doc comments.
## Migration Guide
The `square` and `rectangle` functions belonging to `BorderRect` have
been renamed to `all` and `axes`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Register `BoxShadow` type for reflection
## Testing
- Tested that box shadow example compiles and runs
## Additional
- It would be nice to have this in 0.15.1
# Objective
Draw the UI debug overlay using the UI renderer.
Significantly simpler and easier to use than
`bevy_dev_tools::ui_debug_overlay` which uses `bevy_gizmos`.
* Supports multiple windows and UI rendered to texture.
* Draws rounded debug rects for rounded UI nodes.
Fixes#16666
## Solution
Removed the `ui_debug_overlay` module from `bevy_dev_tools`.
Added a `bevy_ui_debug` feature gate.
Draw the UI debug overlay using the UI renderer.
Adds a new module `bevy_ui::render::debug_overlay`.
The debug overlay extraction function queries for the existing UI layout
and then adds a border around each UI node with `u32::MAX / 2` added to
each stack index so it's drawn on top.
There is a `UiDebugOptions` resource that can be used to enable or
disable the debug overlay and set the line width.
## Testing
The `testbed_ui` example has been changed to use the new debug overlay:
```
cargo run --example testbed_ui --features bevy_ui_debug
```
Press Space to toggle the debug overlay on and off.
---
## Showcase
<img width="961" alt="testbed-ui-new-debug"
src="https://github.com/user-attachments/assets/e9523d18-39ae-46a8-adbe-7d3f3ab8e951">
## Migration Guide
The `ui_debug_overlay` module has been removed from `bevy_dev_tools`.
There is a new debug overlay implemented using the `bevy_ui` renderer.
To use it, enable the `bevy_ui_debug` feature and set the `enable` field
of the `UiDebugOptions` resource to `true`.
Updating dependencies; adopted version of #15696. (Supercedes #15696.)
Long answer: hashbrown is no longer using ahash by default, meaning that
we can't use the default-hasher methods with ahasher. So, we have to use
the longer-winded versions instead. This takes the opportunity to also
switch our default hasher as well, but without actually enabling the
default-hasher feature for hashbrown, meaning that we'll be able to
change our hasher more easily at the cost of all of these method calls
being obnoxious forever.
One large change from 0.15 is that `insert_unique_unchecked` is now
`unsafe`, and for cases where unsafe code was denied at the crate level,
I replaced it with `insert`.
## Migration Guide
`bevy_utils` has updated its version of `hashbrown` to 0.15 and now
defaults to `foldhash` instead of `ahash`. This means that if you've
hard-coded your hasher to `bevy_utils::AHasher` or separately used the
`ahash` crate in your code, you may need to switch to `foldhash` to
ensure that everything works like it does in Bevy.
# Objective
- Fixes#16497
- This is my first PR, so I'm still learning to contribute to the
project
## Solution
- Added struct `UnregisterSystemCached` and function
`unregister_system_cached`
- renamed `World::run_system_with_input` to `run_system_with`
- reordered input parameters for `World::run_system_once_with`
## Testing
- Added a crude test which registers a system via
`World::register_system_cached`, and removes it via
`Command::unregister_system_cached`.
## Migration Guide
- Change all occurrences of `World::run_system_with_input` to
`World::run_system_with`.
- swap the order of input parameters for `World::run_system_once_with`
such that the system comes before the input.
---------
Co-authored-by: Paul Mattern <mail@paulmattern.dev>
# Objective
Fixes#16610, related to #16702
## Solution
Upgrade typos and its configuration
## Testing
- Did you test these changes? If so, how? No
- Are there any parts that need more testing? No
- How can other people (reviewers) test your changes? Is there anything
specific they need to know? No
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test? Not applicable
# Objective
Fixes typos in bevy project, following suggestion in
https://github.com/bevyengine/bevy-website/pull/1912#pullrequestreview-2483499337
## Solution
I used https://github.com/crate-ci/typos to find them.
I included only the ones that feel undebatable too me, but I am not in
game engine so maybe some terms are expected.
I left out the following typos:
- `reparametrize` => `reparameterize`: There are a lot of occurences, I
believe this was expected
- `semicircles` => `hemicircles`: 2 occurences, may mean something
specific in geometry
- `invertation` => `inversion`: may mean something specific
- `unparented` => `parentless`: may mean something specific
- `metalness` => `metallicity`: may mean something specific
## Testing
- Did you test these changes? If so, how? I did not test the changes,
most changes are related to raw text. I expect the others to be tested
by the CI.
- Are there any parts that need more testing? I do not think
- How can other people (reviewers) test your changes? Is there anything
specific they need to know? To me there is nothing to test
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
---
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
(kept in case I include the `reparameterize` change here)
- If this PR is a breaking change (relative to the last release of
Bevy), describe how a user might need to migrate their code to support
these changes
- Simply adding new functionality is not a breaking change.
- Fixing behavior that was definitely a bug, rather than a questionable
design choice is not a breaking change.
## Questions
- [x] Should I include the above typos? No
(https://github.com/bevyengine/bevy/pull/16702#issuecomment-2525271152)
- [ ] Should I add `typos` to the CI? (I will check how to configure it
properly)
This project looks awesome, I really enjoy reading the progress made,
thanks to everyone involved.
This commit adds support for *multidraw*, which is a feature that allows
multiple meshes to be drawn in a single drawcall. `wgpu` currently
implements multidraw on Vulkan, so this feature is only enabled there.
Multiple meshes can be drawn at once if they're in the same vertex and
index buffers and are otherwise placed in the same bin. (Thus, for
example, at present the materials and textures must be identical, but
see #16368.) Multidraw is a significant performance improvement during
the draw phase because it reduces the number of rebindings, as well as
the number of drawcalls.
This feature is currently only enabled when GPU culling is used: i.e.
when `GpuCulling` is present on a camera. Therefore, if you run for
example `scene_viewer`, you will not see any performance improvements,
because `scene_viewer` doesn't add the `GpuCulling` component to its
camera.
Additionally, the multidraw feature is only implemented for opaque 3D
meshes and not for shadows or 2D meshes. I plan to make GPU culling the
default and to extend the feature to shadows in the future. Also, in the
future I suspect that polyfilling multidraw on APIs that don't support
it will be fruitful, as even without driver-level support use of
multidraw allows us to avoid expensive `wgpu` rebindings.
# Objective
- Remove `derive_more`'s error derivation and replace it with
`thiserror`
## Solution
- Added `derive_more`'s `error` feature to `deny.toml` to prevent it
sneaking back in.
- Reverted to `thiserror` error derivation
## Notes
Merge conflicts were too numerous to revert the individual changes, so
this reversion was done manually. Please scrutinise carefully during
review.
# Objective
- Required by #16622 due to differing implementations of `System` by
`FunctionSystem` and `ExclusiveFunctionSystem`.
- Optimize the memory usage of instances of `apply_deferred` in system
schedules.
## Solution
By changing `apply_deferred` from being an ordinary system that ends up
as an `ExclusiveFunctionSystem`, and instead into a ZST struct that
implements `System` manually, we save ~320 bytes per instance of
`apply_deferred` in any schedule.
## Testing
- All current tests pass.
---
## Migration Guide
- If you were previously calling the special `apply_deferred` system via
`apply_deferred(world)`, don't.
# Objective
Make documentation of a component's required components more visible by
moving it to the type's docs
## Solution
Change `#[require]` from a derive macro helper to an attribute macro.
Disadvantages:
- this silences any unused code warnings on the component, as it is used
by the macro!
- need to import `require` if not using the ecs prelude (I have not
included this in the migration guilde as Rust tooling already suggests
the fix)
---
## Showcase
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
# Objective
The `UiBoxShadowSamples` resource should be renamed to
`BoxShadowSamples` so it matches the `BoxShadow` component.
## Migration Guide
`UiBoxShadowSamples` has been renamed to `BoxShadowSamples`
# Objective
Remove the `min` and `max` fields from `LayoutContext`.
It doesn't seem useful to cache these values, it's simpler just to call
`min_element` and `max_element` on the `physical_size`
field.
## Migration Guide
The `min` and `max` fields have been removed from `LayoutContext`. To
retrieve these values call `min_element` and `max_element` on
`LayoutContent::physical_size` instead.
This patch adds the infrastructure necessary for Bevy to support
*bindless resources*, by adding a new `#[bindless]` attribute to
`AsBindGroup`.
Classically, only a single texture (or sampler, or buffer) can be
attached to each shader binding. This means that switching materials
requires breaking a batch and issuing a new drawcall, even if the mesh
is otherwise identical. This adds significant overhead not only in the
driver but also in `wgpu`, as switching bind groups increases the amount
of validation work that `wgpu` must do.
*Bindless resources* are the typical solution to this problem. Instead
of switching bindings between each texture, the renderer instead
supplies a large *array* of all textures in the scene up front, and the
material contains an index into that array. This pattern is repeated for
buffers and samplers as well. The renderer now no longer needs to switch
binding descriptor sets while drawing the scene.
Unfortunately, as things currently stand, this approach won't quite work
for Bevy. Two aspects of `wgpu` conspire to make this ideal approach
unacceptably slow:
1. In the DX12 backend, all binding arrays (bindless resources) must
have a constant size declared in the shader, and all textures in an
array must be bound to actual textures. Changing the size requires a
recompile.
2. Changing even one texture incurs revalidation of all textures, a
process that takes time that's linear in the total size of the binding
array.
This means that declaring a large array of textures big enough to
encompass the entire scene is presently unacceptably slow. For example,
if you declare 4096 textures, then `wgpu` will have to revalidate all
4096 textures if even a single one changes. This process can take
multiple frames.
To work around this problem, this PR groups bindless resources into
small *slabs* and maintains a free list for each. The size of each slab
for the bindless arrays associated with a material is specified via the
`#[bindless(N)]` attribute. For instance, consider the following
declaration:
```rust
#[derive(AsBindGroup)]
#[bindless(16)]
struct MyMaterial {
#[buffer(0)]
color: Vec4,
#[texture(1)]
#[sampler(2)]
diffuse: Handle<Image>,
}
```
The `#[bindless(N)]` attribute specifies that, if bindless arrays are
supported on the current platform, each resource becomes a binding array
of N instances of that resource. So, for `MyMaterial` above, the `color`
attribute is exposed to the shader as `binding_array<vec4<f32>, 16>`,
the `diffuse` texture is exposed to the shader as
`binding_array<texture_2d<f32>, 16>`, and the `diffuse` sampler is
exposed to the shader as `binding_array<sampler, 16>`. Inside the
material's vertex and fragment shaders, the applicable index is
available via the `material_bind_group_slot` field of the `Mesh`
structure. So, for instance, you can access the current color like so:
```wgsl
// `uniform` binding arrays are a non-sequitur, so `uniform` is automatically promoted
// to `storage` in bindless mode.
@group(2) @binding(0) var<storage> material_color: binding_array<Color, 4>;
...
@fragment
fn fragment(in: VertexOutput) -> @location(0) vec4<f32> {
let color = material_color[mesh[in.instance_index].material_bind_group_slot];
...
}
```
Note that portable shader code can't guarantee that the current platform
supports bindless textures. Indeed, bindless mode is only available in
Vulkan and DX12. The `BINDLESS` shader definition is available for your
use to determine whether you're on a bindless platform or not. Thus a
portable version of the shader above would look like:
```wgsl
#ifdef BINDLESS
@group(2) @binding(0) var<storage> material_color: binding_array<Color, 4>;
#else // BINDLESS
@group(2) @binding(0) var<uniform> material_color: Color;
#endif // BINDLESS
...
@fragment
fn fragment(in: VertexOutput) -> @location(0) vec4<f32> {
#ifdef BINDLESS
let color = material_color[mesh[in.instance_index].material_bind_group_slot];
#else // BINDLESS
let color = material_color;
#endif // BINDLESS
...
}
```
Importantly, this PR *doesn't* update `StandardMaterial` to be bindless.
So, for example, `scene_viewer` will currently not run any faster. I
intend to update `StandardMaterial` to use bindless mode in a follow-up
patch.
A new example, `shaders/shader_material_bindless`, has been added to
demonstrate how to use this new feature.
Here's a Tracy profile of `submit_graph_commands` of this patch and an
additional patch (not submitted yet) that makes `StandardMaterial` use
bindless. Red is those patches; yellow is `main`. The scene was Bistro
Exterior with a hack that forces all textures to opaque. You can see a
1.47x mean speedup.
## Migration Guide
* `RenderAssets::prepare_asset` now takes an `AssetId` parameter.
* Bin keys now have Bevy-specific material bind group indices instead of
`wgpu` material bind group IDs, as part of the bindless change. Use the
new `MaterialBindGroupAllocator` to map from bind group index to bind
group ID.
# Objective
- Keep Taffy version up to date
Taffy 0.6 doesn't include a huge amount relevant to Bevy. But it does:
- Add the `box_sizing` style
- Expose the computed `margin` in layout
- Traitifies the `Style` struct, which opens up the possibility of using
Bevy's `Style` struct directly (although Bevy currently does some style
resolution at conversion time which would no longer be cached if it was
used directly).
- Have a few bug fixes in the layout algorithms
## Solution
- Upgrade Taffy to `0.6.0`
## Testing
- I've run the `grid` example. All looks good.
- More testing is probably warranted. We have had regressions from Taffy
upgrades before
- Having said that, most of the algorithm changes this cycle were driven
by fixing WPT tests run through the new Servo integration. So they're
possibly less likely than usual to cause regressions.
## Breaking changes
The only "breaking" change is adding a field to `Style`. Probably
doesn't bear mentioning?
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Add support for multiple box shadows on a single `Node`.
## Solution
* Rename `BoxShadow` to `ShadowStyle` and remove its `Component` derive.
* Create a new `BoxShadow` component that newtypes a `Vec<ShadowStyle>`.
* Add a `new` constructor method to `BoxShadow` for single shadows.
* Change `extract_shadows` to iterate through a list of shadows per
node.
Render order is determined implicitly from the order of the shadows
stored in the `BoxShadow` component, back-to-front.
Might be more efficient to use a `SmallVec<[ShadowStyle; 1]>` for the
list of shadows but not sure if the extra friction is worth it.
## Testing
Added a node with four differently coloured shadows to the `box_shadow`
example.
---
## Showcase
```
cargo run --example box_shadow
```
<img width="460" alt="four-shadow"
src="https://github.com/user-attachments/assets/2f728c47-33b4-42e1-96ba-28a774b94b24">
## Migration Guide
Bevy UI now supports multiple shadows per node. A new struct
`ShadowStyle` is used to set the style for each shadow. And the
`BoxShadow` component is changed to a tuple struct wrapping a vector
containing a list of `ShadowStyle`s. To spawn a node with a single
shadow you can use the `new` constructor function:
```rust
commands.spawn((
Node::default(),
BoxShadow::new(
Color::BLACK.with_alpha(0.8),
Val::Percent(offset.x),
Val::Percent(offset.y),
Val::Percent(spread),
Val::Px(blur),
)
));
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- In 0.14, ZIndex and GlobalZIndex where split from a shared enum into
separate components. There have been a few people confused by the
behavior of ZIndex when they really needed GlobalZIndex.
## Solution
- Update ZIndex docs to improve discoverability of GlobalZIndex.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
When using a rect for a ui image, its content size is still equal to the
size of the full image instead of the size of the rect.
## Solution
Use the rect size if it is present.
## Testing
I tested it using all 4 possible combinations of having a rect and
texture atlas or not. See the showcase section.
---
## Showcase
<details>
<summary>Click to view showcase</summary>
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins.set(ImagePlugin::default_nearest()))
.add_systems(Startup, create_ui)
.run();
}
fn create_ui(
mut commands: Commands,
assets: Res<AssetServer>,
mut texture_atlas_layouts: ResMut<Assets<TextureAtlasLayout>>,
mut ui_scale: ResMut<UiScale>,
) {
let texture = assets.load("textures/fantasy_ui_borders/numbered_slices.png");
let layout = TextureAtlasLayout::from_grid(UVec2::splat(16), 3, 3, None, None);
let texture_atlas_layout = texture_atlas_layouts.add(layout);
ui_scale.0 = 2.;
commands.spawn(Camera2d::default());
commands
.spawn(Node {
display: Display::Flex,
align_items: AlignItems::Center,
..default()
})
.with_children(|parent| {
// nothing
parent.spawn(ImageNode::new(texture.clone()));
// with rect
parent.spawn(ImageNode::new(texture.clone()).with_rect(Rect::new(0., 0., 16., 16.)));
// with rect and texture atlas
parent.spawn(
ImageNode::from_atlas_image(
texture.clone(),
TextureAtlas {
layout: texture_atlas_layout.clone(),
index: 1,
},
)
.with_rect(Rect::new(0., 0., 8., 8.)),
);
// with texture atlas
parent.spawn(ImageNode::from_atlas_image(
texture.clone(),
TextureAtlas {
layout: texture_atlas_layout.clone(),
index: 2,
},
));
});
}
```
Before this change:
<img width="529" alt="Screenshot 2024-11-21 at 11 55 45"
src="https://github.com/user-attachments/assets/23196003-08ca-4049-8409-fe349bd5aa54">
After the change:
<img width="400" alt="Screenshot 2024-11-21 at 11 54 54"
src="https://github.com/user-attachments/assets/e2cd6ebf-859c-40a1-9fc4-43bb28b024e5">
</details>
# Objective
- Fixes#16472.
## Solution
- Add flags to `SpritePlugin` and `UiPlugin` to disable their picking
backends.
## Testing
- The change is pretty trivial, so not much to test!
---
## Migration Guide
- `UiPlugin` now contains an extra `add_picking` field if
`bevy_ui_picking_backend` is enabled.
- `SpritePlugin` is no longer a unit struct, and has one field if
`bevy_sprite_picking_backend` is enabled (otherwise no fields).
# Objective
- Fixes#16469.
## Solution
- Make the picking backend features not enabled by default in each
sub-crate.
- Make features in `bevy_internal` to set the backend features
- Make the root `bevy` crate set the features by default.
## Testing
- The mesh and sprite picking examples still work correctly.
# Objective
We switch back and forwards between logical and physical coordinates all
over the place. Systems have to query for cameras and the UiScale when
they shouldn't need to. It's confusing and fragile and new scale factor
bugs get found constantly.
## Solution
* Use physical coordinates whereever possible in `bevy_ui`.
* Store physical coords in `ComputedNode` and tear out all the unneeded
scale factor calculations and queries.
* Add an `inverse_scale_factor` field to `ComputedNode` and set nodes
changed when their scale factor changes.
## Migration Guide
`ComputedNode`'s fields and methods now use physical coordinates.
`ComputedNode` has a new field `inverse_scale_factor`. Multiplying the
physical coordinates by the `inverse_scale_factor` will give the logical
values.
---------
Co-authored-by: atlv <email@atlasdostal.com>
# Objective
Needing to derive `AnimationEvent` for `Event` is unnecessary, and the
trigger logic coupled to it feels like we're coupling "event producer"
logic with the event itself, which feels wrong. It also comes with a
bunch of complexity, which is again unnecessary. We can have the
flexibility of "custom animation event trigger logic" without this
coupling and complexity.
The current `animation_events` example is also needlessly complicated,
due to it needing to work around system ordering issues. The docs
describing it are also slightly wrong. We can make this all a non-issue
by solving the underlying ordering problem.
Related to this, we use the `bevy_animation::Animation` system set to
solve PostUpdate animation order-of-operations issues. If we move this
to bevy_app as part of our "core schedule", we can cut out needless
`bevy_animation` crate dependencies in these instances.
## Solution
- Remove `AnimationEvent`, the derive, and all other infrastructure
associated with it (such as the `bevy_animation/derive` crate)
- Replace all instances of `AnimationEvent` traits with `Event + Clone`
- Store and use functions for custom animation trigger logic (ex:
`clip.add_event_fn()`). For "normal" cases users dont need to think
about this and should use the simpler `clip.add_event()`
- Run the `Animation` system set _before_ updating text
- Move `bevy_animation::Animation` to `bevy_app::Animation`. Remove
unnecessary `bevy_animation` dependency from `bevy_ui`
- Adjust `animation_events` example to use the simpler `clip.add_event`
API, as the workarounds are no longer necessary
This is polishing work that will land in 0.15, and I think it is simple
enough and valuable enough to land in 0.15 with it, in the interest of
making the feature as compelling as possible.
# Objective
It looks like this file was created based on the `ui_texture_slice`
rendering code and some variable names weren't updated.
## Solution
Rename "texture slice" variable names to "box shadow".
# Objective
https://github.com/AccessKit/accesskit/pull/475 changed how text content
should be set for AccessKit nodes with a role of `Label`. This was
unfortunately missing from #16234.
## Solution
When building an `accesskit::Node` with `Role::Label`, calls `set_value`
instead of `set_label` on the node to set its content.
## Testing
I can't test this right now on my Windows machine due to a compilation
error with wgpu-hal I have no idea how to resolve.
# Objective
UI Anti-aliasing is incorrectly implemented. It always uses an edge
radius of 0.25 logical pixels, and ignores the physical resolution. For
low dpi screens 0.25 is is too low and on higher dpi screens the
physical edge radius is much too large, resulting in visual artifacts.
## Solution
Multiply the distance by the scale factor in the `antialias` function so
that the edge radius stays constant in physical pixels.
## Testing
To see the problem really clearly run the button example with `UiScale`
set really high. With `UiScale(25.)` on main if you examine the button's
border you can see a thick gradient fading away from the edges:
<img width="127" alt="edgg"
src="https://github.com/user-attachments/assets/7c852030-c0e8-4aef-8d3e-768cb2464cab">
With this PR the edges are sharp and smooth at all scale factors:
<img width="127" alt="edge"
src="https://github.com/user-attachments/assets/b3231140-1bbc-4a4f-a1d3-dde21f287988">
# Objective
Fixes#16316
## Solution
Tweaked a few crates cargo files until I was able to build and test
`bevy_ui` via `cargo test --package bevy_ui`
## Testing
- ran `cargo test --package bevy_ui` successfully
- CI should catch anything amiss (Hopefully?)
# Objective
`ButtonBundle` has an `ImageNode` component (renamed from `UiImage`)
which wasn't a problem in 0.14 but in 0.15 `requires` pulls in the
`ContentSize` and `NodeImageSize` which means that by default
`ButtonBundle` nodes are given a measure func based on the size of the
image belonging to `TRANSPARENT_IMAGE_HANDLE`, which is 1x1.
This doesn't make sense and the behaviour for default image nodes should
either be to go to zero size or not add a measure func.
## Solution
Check if an image has a `TRANSPARENT_IMAGE_HANDLE` and if it does remove
its measure func.
Possibly a zero-sized measure would make more sense, but that would
break existing code.
## Testing
Used `ButtonBundle` in the 0.15 `button` example and the border doesn't
render, after this change it does.
# Objective
- Fix bug where `UiSurface::set_camera_children` (and
`UiSurface::update_children` sometimes) will panic if you remove and add
a `Node` component in a single tick. This is more likely to happen now
because of `remove_with_requires`.
## Solution
- Filter out entities with `Node` when cleaning up entities from
`RemovedComponents<Node>`.
## Testing
- Not tested (rust compiler refused to cooperate when I tried to patch
this into my project), correct by inspection.
# Objective
Fixes#15940
## Solution
Remove the `pub use` and fix the compile errors.
Make `bevy_image` available as `bevy::image`.
## Testing
Feature Frenzy would be good here! Maybe I'll learn how to use it if I
have some time this weekend, or maybe a reviewer can use it.
## Migration Guide
Use `bevy_image` instead of `bevy_render::texture` items.
---------
Co-authored-by: chompaa <antony.m.3012@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
- wgpu 0.20 made workgroup vars stop being zero-init by default. this
broke some applications (cough foresight cough) and now we workaround
it. wgpu exposes a compilation option that zero initializes workgroup
memory by default, but bevy does not expose it.
## Solution
- expose the compilation option wgpu gives us
## Testing
- ran examples: 3d_scene, compute_shader_game_of_life, gpu_readback,
lines, specialized_mesh_pipeline. they all work
- confirmed fix for our own problems
---
</details>
## Migration Guide
- add `zero_initialize_workgroup_memory: false,` to
`ComputePipelineDescriptor` or `RenderPipelineDescriptor` structs to
preserve 0.14 functionality, add `zero_initialize_workgroup_memory:
true,` to restore bevy 0.13 functionality.
# Objective
- Fixes#16235
## Solution
- Both Bevy and AccessKit export a `Node` struct, to reduce confusion
Bevy will no longer re-export `AccessKit` from `bevy_a11y`
## Testing
- Tested locally
## Migration Guide
```diff
# main.rs
-- use bevy_a11y::{
-- accesskit::{Node, Rect, Role},
-- AccessibilityNode,
-- };
++ use bevy_a11y::AccessibilityNode;
++ use accesskit::{Node, Rect, Role};
# Cargo.toml
++ accesskit = "0.17"
```
- Users will need to add `accesskit = "0.17"` to the dependencies
section of their `Cargo.toml` file and update their `accesskit` use
statements to come directly from the external crate instead of
`bevy_a11y`.
- Make sure to keep the versions of `accesskit` aligned with the
versions Bevy uses.
# Objective
Automatic imaging sizing for image nodes isn't working because the the
`ContentSize` requirement for `UiImage` got lost in some merge again.
Fixes#16239Fixes#16240
Fixes the missing images seen in #16241
## Solution
Require `ContentSize` for `UiImage`.
# Objective
Use same pattern when creating `TransparentUi` items where the
`sort_key` is the `UiNode` stack index + some offset.
## Solution
Refactored to follow same pattern.
## Testing
Ran few UI examples.
## Doubts
Maybe `stack_z_offsets::BACKGROUND_COLOR` should be renamed. This is
used for `ExtractedUiNode`, which is not only used for "background
color" it's also used to render borders, images and text (I think).
# Objective
- Bumps accesskit and accesskit_winit dependencies
## Solution
- Fixes several breaking API changes introduced in accesskit 0.23.
## Testing
- Tested with the ui example and seems to work comparably
# Objective
1. UI texture slicing chops and scales an image to fit the size of a
node and isn't meant to place any constraints on the size of the node
itself, but because the required components changes required `ImageSize`
and `ContentSize` for nodes with `UiImage`, texture sliced nodes are
laid out using an `ImageMeasure`.
2. In 0.14 users could spawn a `(UiImage, NodeBundle)` which would
display an image stretched to fill the UI node's bounds ignoring the
image's instrinsic size. Now that `UiImage` requires `ContentSize`,
there's no option to display an image without its size placing
constrains on the UI layout (unless you force the `Node` to a fixed
size, but that's not a solution).
3. It's desirable that the `Sprite` and `UiImage` share similar APIs.
Fixes#16109
## Solution
* Remove the `Component` impl from `ImageScaleMode`.
* Add a `Stretch` variant to `ImageScaleMode`.
* Add a field `scale_mode: ImageScaleMode` to `Sprite`.
* Add a field `mode: UiImageMode` to `UiImage`.
* Add an enum `UiImageMode` similar to `ImageScaleMode` but with
additional UI specific variants.
* Remove the queries for `ImageScaleMode` from Sprite and UI extraction,
and refer to the new fields instead.
* Change `ui_layout_system` to update measure funcs on any change to
`ContentSize`s to enable manual clearing without removing the component.
* Don't add a measure unless `UiImageMode::Auto` is set in
`update_image_content_size_system`. Mutably deref the `Mut<ContentSize>`
if the `UiImage` is changed to force removal of any existing measure
func.
## Testing
Remove all the constraints from the ui_texture_slice example:
```rust
//! This example illustrates how to create buttons with their textures sliced
//! and kept in proportion instead of being stretched by the button dimensions
use bevy::{
color::palettes::css::{GOLD, ORANGE},
prelude::*,
winit::WinitSettings,
};
fn main() {
App::new()
.add_plugins(DefaultPlugins)
// Only run the app when there is user input. This will significantly reduce CPU/GPU use.
.insert_resource(WinitSettings::desktop_app())
.add_systems(Startup, setup)
.add_systems(Update, button_system)
.run();
}
fn button_system(
mut interaction_query: Query<
(&Interaction, &Children, &mut UiImage),
(Changed<Interaction>, With<Button>),
>,
mut text_query: Query<&mut Text>,
) {
for (interaction, children, mut image) in &mut interaction_query {
let mut text = text_query.get_mut(children[0]).unwrap();
match *interaction {
Interaction::Pressed => {
**text = "Press".to_string();
image.color = GOLD.into();
}
Interaction::Hovered => {
**text = "Hover".to_string();
image.color = ORANGE.into();
}
Interaction::None => {
**text = "Button".to_string();
image.color = Color::WHITE;
}
}
}
}
fn setup(mut commands: Commands, asset_server: Res<AssetServer>) {
let image = asset_server.load("textures/fantasy_ui_borders/panel-border-010.png");
let slicer = TextureSlicer {
border: BorderRect::square(22.0),
center_scale_mode: SliceScaleMode::Stretch,
sides_scale_mode: SliceScaleMode::Stretch,
max_corner_scale: 1.0,
};
// ui camera
commands.spawn(Camera2d);
commands
.spawn(Node {
width: Val::Percent(100.0),
height: Val::Percent(100.0),
align_items: AlignItems::Center,
justify_content: JustifyContent::Center,
..default()
})
.with_children(|parent| {
for [w, h] in [[150.0, 150.0], [300.0, 150.0], [150.0, 300.0]] {
parent
.spawn((
Button,
Node {
// width: Val::Px(w),
// height: Val::Px(h),
// horizontally center child text
justify_content: JustifyContent::Center,
// vertically center child text
align_items: AlignItems::Center,
margin: UiRect::all(Val::Px(20.0)),
..default()
},
UiImage::new(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
))
.with_children(|parent| {
// parent.spawn((
// Text::new("Button"),
// TextFont {
// font: asset_server.load("fonts/FiraSans-Bold.ttf"),
// font_size: 33.0,
// ..default()
// },
// TextColor(Color::srgb(0.9, 0.9, 0.9)),
// ));
});
}
});
}
```
This should result in a blank window, since without any constraints the
texture slice image nodes should be zero-sized. But in main the image
nodes are given the size of the underlying unsliced source image
`textures/fantasy_ui_borders/panel-border-010.png`:
<img width="321" alt="slicing"
src="https://github.com/user-attachments/assets/cbd74c9c-14cd-4b4d-93c6-7c0152bb05ee">
For this PR need to change the lines:
```
UiImage::new(image.clone()),
ImageScaleMode::Sliced(slicer.clone()),
```
to
```
UiImage::new(image.clone()).with_mode(UiImageMode::Sliced(slicer.clone()),
```
and then nothing should be rendered, as desired.
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Make all the methods and associated functions belonging to
`ComputedNode` const.
## Solution
Constify (except for `inner_radius` which uses non-const `min` and
`max`).
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
The `ContentSize` requirement on `UiImage` got lost during merge
conflict fixes, causing some images such as the icons on the `game_menu`
example to disappear.
Fixes#16136
## Solution
Require `ContentSize` on `UiImage` again.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Taffy added layout rounding a while ago but it had a couple of bugs and
caused some problems with the fussy `ab_glyph` text implementation. So I
disabled Taffy's builtin rounding and added some hacks ad hoc that fixed
(some) of those issues. Since then though Taffy's rounding algorithm has
improved while we've changed layout a lot and migrated to `cosmic-text`
so those hacks don't help any more and in some cases cause significant
problems.
Also our rounding implementation only rounds to the nearest logical
pixel, whereas Taffy rounds to the nearest physical pixel meaning it's
much more accurate with high dpi displays.
fixes#15197
## Some examples of layout rounding errors visible in the UI examples
These errors are much more obvious at high scale factor, you might not
see any problems at a scale factor of 1.
`cargo run --example text_wrap_debug`
<img width="1000" alt="text_debug_gaps"
src="https://github.com/user-attachments/assets/5a584016-b8e2-487b-8842-f0f359077391">
The narrow horizontal and vertical lines are gaps in the layout caused
by errors in the coordinate rounding.
`cargo run --example text_debug`
<img width="1000" alt="text_debug"
src="https://github.com/user-attachments/assets/a4b37c02-a2fd-441c-a7bd-cd7a1a72e7dd">
The two text blocks here are aligned right to the same boundary but in
this screen shot you can see that the lower block is one pixel off to
the left. Because the size of this text node changes between frames with
the reported framerate the rounding errors cause it to jump left and
right.
## Solution
Remove all our custom rounding hacks and reenable Taffy's layout
rounding.
The gaps in the `text_wrap_debug` example are gone:
<img width="1000" alt="text_wrap_debug_fix"
src="https://github.com/user-attachments/assets/92d2dd97-30c6-4ac8-99f1-6d65358995a7">
This doesn't fix some of the gaps that occur between borders and content
but they seem appear to be a rendering problem as they disappear with
`UiAntiAlias::Off` set.
## Testing
Run the examples as described above in the `Objective` section. With
this PR the problems mentioned shouldn't appear.
Also added an example in a separate PR #16096 `layout_rounding_debug`
for identifying these issues.
## Migration Guide
`UiSurface::get_layout` now also returns the final sizes before
rounding. Call `.0` on the `Ok` result to get the previously returned
`taffy::Layout` value.
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
Remove `calculated_` from the name `ComputedNode::calculated_size` as
redundant, It's obvious from context that it's the resolved size value
and it's inconsistant since none of other fields of `ComputedNode` have
a `calculated_` prefix.
## Alternatives
Rename all the fields of `ComputedNode` to `calculated_*`, this seems
worse.
# Objective
Missed this in the required components PR review. `ContentSize` isn't
used by regular UI nodes, only those with intrinsically sized content
that needs a measure func.
## Solution
Remove `ContentSize` from `Node`'s required components and add it to the
required components of `Text` and `UiImage`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
`UiImage` isn't just a general image component now, it's the defining
component for the image widget so it belongs in the image widget's
module.
# Objective
- `MeshPickingBackend` and `SpritePickingBackend` do not have the
`Plugin` suffix
- `DefaultPickingPlugins` is masquerading as a `Plugin` when in reality
it should be a `PluginGroup`
- Fixes#16081.
## Solution
- Rename some structures:
|Original Name|New Name|
|-|-|
|`MeshPickingBackend`|`MeshPickingPlugin`|
|`MeshPickingBackendSettings`|`MeshPickingSettings`|
|`SpritePickingBackend`|`SpritePickingPlugin`|
|`UiPickingBackendPlugin`|`UiPickingPlugin`|
- Make `DefaultPickingPlugins` a `PluginGroup`.
- Because `DefaultPickingPlugins` is within the `DefaultPlugins` plugin
group, I also added support for nested plugin groups to the
`plugin_group!` macro.
## Testing
- I used ripgrep to ensure all references were properly renamed.
- For the `plugin_group!` macro, I used `cargo expand` to manually
inspect the expansion of `DefaultPlugins`.
---
## Migration Guide
> [!NOTE]
>
> All 3 of the changed structures were added after 0.14, so this does
not need to be included in the 0.14 to 0.15 migration guide.
- `MeshPickingBackend` is now named `MeshPickingPlugin`.
- `MeshPickingBackendSettings` is now named `MeshPickingSettings`.
- `SpritePickingBackend` is now named `SpritePickingPlugin`.
- `UiPickingBackendPlugin` is now named `UiPickingPlugin`.
- `DefaultPickingPlugins` is now a a `PluginGroup` instead of a
`Plugin`.
# Objective
- Follow up on #16044
- `extract_uinode_borders` uses `bevy_hierarchy` directly instead of
going through the traversal utilities, meaning it won't handle
`GhostNode`s properly.
## Solution
- Replaced the use of `bevy_hierarchy::Parent` with
`UIChildren::get_parent`
## Testing
- Ran the `overflow` example, clipping looks ok.
---
---------
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
1. Nodes with `Display::None` set are removed from the layout and have
no position or size. Outlines should not be drawn for a node with
`Display::None` set.
2. The outline and border colors are checked for transparency together.
If only one of the two is transparent, both will get queued.
3. The `node.is_empty()` check is insufficient to check if a border is
present since a non-zero sized node can have a zero width border.
## Solution
1. Add a check to `extract_uinode_borders` and ignore the node if
`Display::None` is set.
2. Filter the border and outline optional components by
`is_fully_transparent`.
3. Check if all the border widths are zero instead.
## Testing
I added dark cyan outlines around the left and right sections in the
`display_and_visibility` example. If you run the example and set the
outermost node to `Display::None` on the right, then you'll see the that
the outline on the left disappears.
# Objective
Fixes#16006
## Solution
We currently re-export `cosmic_text`, which is seemingly motivated by
the desire to use `cosmic_text::FontSystem` in `bevy_text` public APIs
instead of our `CosmicFontSystem` resource wrapper type.
This change makes `bevy_text` a "true" abstraction over `cosmic_text`
(it in fact, was already built to be that way generally and has this one
"leak").
This allows us to remove the `cosmic_text` re-export, which helps clean
up the Rust Analyzer imports and generally makes this a "cleaner" API.
# Objective
fixes#15502
Clipped borders and outlines aren't drawn correctly.
### Borders aren't clipped
Spawn two nodes with the same dimensions and border thickness, but clip
on of the nodes so that only its top left quarter is visible:
<img width="194" alt="clip"
src="https://github.com/user-attachments/assets/2d3f6d28-aa20-44df-967a-677725828294">
You can see that instead of clipping the border, instead the border is
scaled to fit inside of the unclipped section.
```rust
use bevy::color::palettes::css::BLUE;
use bevy::prelude::*;
use bevy::winit::WinitSettings;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.insert_resource(WinitSettings::desktop_app())
.add_systems(Startup, setup)
.run();
}
fn setup(mut commands: Commands) {
commands.spawn(Camera2d);
commands
.spawn(Node {
width: Val::Percent(100.),
height: Val::Percent(100.),
justify_content: JustifyContent::Center,
align_items: AlignItems::Center,
..Default::default()
})
.with_children(|commands| {
commands
.spawn(Node {
column_gap: Val::Px(10.),
..Default::default()
})
.with_children(|commands| {
commands
.spawn(Node {
width: Val::Px(100.),
height: Val::Px(100.),
overflow: Overflow::clip(),
..Default::default()
})
.with_child((
Node {
position_type: PositionType::Absolute,
width: Val::Px(100.),
height: Val::Px(100.),
border: UiRect::all(Val::Px(10.)),
..Default::default()
},
BackgroundColor(Color::WHITE),
BorderColor(BLUE.into()),
));
commands
.spawn(Node {
width: Val::Px(50.),
height: Val::Px(50.),
overflow: Overflow::clip(),
..Default::default()
})
.with_child((
Node {
position_type: PositionType::Absolute,
width: Val::Px(100.),
height: Val::Px(100.),
border: UiRect::all(Val::Px(10.)),
..Default::default()
},
BackgroundColor(Color::WHITE),
BorderColor(BLUE.into()),
));
});
});
}
```
You can also see this problem in the `overflow` example. If you hover
over any of the clipped nodes you'll see that the outline only wraps the
visible section of the node
### Outlines are clipped incorrectly
A UI nodes Outline's are drawn outside of its bounds, so applying the
local clipping rect to the outline doesn't make any sense.
Instead an `Outline` should be clipped using its parent's clipping rect.
## Solution
* Pass the `point` value into the vertex shader instead of calculating
it in the shader.
* In `extract_uinode_borders` use the parents clipping rect when
clipping outlines.
The extra parameter isn't a great solution I think, but I wanted to fix
borders for the 0.15 release and this is the most minimal approach I
could think of without replacing the whole shader and prepare function.
## Showcase
<img width="149" alt="clipp"
src="https://github.com/user-attachments/assets/19fbd3cc-e7cd-42e1-a5e0-fd92aad04dcd">
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Bevy seems to want to standardize on "American English" spellings. Not
sure if this is laid out anywhere in writing, but see also #15947.
While perusing the docs for `typos`, I noticed that it has a `locale`
config option and tried it out.
## Solution
Switch to `en-us` locale in the `typos` config and run `typos -w`
## Migration Guide
The following methods or fields have been renamed from `*dependants*` to
`*dependents*`.
- `ProcessorAssetInfo::dependants`
- `ProcessorAssetInfos::add_dependant`
- `ProcessorAssetInfos::non_existent_dependants`
- `AssetInfo::dependants_waiting_on_load`
- `AssetInfo::dependants_waiting_on_recursive_dep_load`
- `AssetInfos::loader_dependants`
- `AssetInfos::remove_dependants_and_labels`
# Objective
Make UI rendering optional.
Quite a few people have been experimenting with using Bevy UI for layout
and interaction but replacing the rendering with `bevy_prototype_lyon`
or whatever. It's awkward to do though as there is no way to disable the
existing UI rendering requiring users to create their own custom node
bundles and components. Also, you can't replace the UI's shader and a
number of other things.
This PR makes the setup and initialization of UI rendering for the
RenderApp optional. Then you can do whatever you want by replacing
`build_ui_render` with your own function. For instance, one that loads a
custom shader.
The UI layout and interaction components are still updated as normal.
## Solution
Add a field `enable_rendering` to `UiPlugin`.
Only call `build_ui_render` and initialize the `UiPipeline` if
`enable_rendering` is false.
I thought about implementing a "bevy_ui_render" feature but suspect
everything is too tightly coupled atm and it would be very fragile.
Similar to the struggles with the "bevy_text" feature but worse.
---
## Changelog
`UiPlugin`
* Added a bool field `enable_rendering`.
* Only calls `build_ui_render` and initializes the `UiPipeline` if
`enable_rendering` is true.
## Migration Guide
`UiPlugin` has a new field `enable_rendering`. If set to false, the UI's
rendering systems won't be added to the `RenderApp` and no UI elements
will be drawn. The layout and interaction components will still be
updated as normal.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/15871
(Camera is done in #15946)
## Solution
- Do the same as #15904 for other extraction systems
- Added missing `SyncComponentPlugin` for DOF, TAA, and SSAO
(According to the
[documentation](https://dev-docs.bevyengine.org/bevy/render/sync_component/struct.SyncComponentPlugin.html),
this plugin "needs to be added for manual extraction implementations."
We may need to check this is done.)
## Testing
Modified example locally to add toggles if not exist.
- [x] DOF - toggling DOF component and perspective in `depth_of_field`
example
- [x] TAA - toggling `Camera.is_active` and TAA component
- [x] clusters - not entirely sure, toggling `Camera.is_active` in
`many_lights` example (no crash/glitch even without this PR)
- [x] previous_view - toggling `Camera.is_active` in `skybox` (no
crash/glitch even without this PR)
- [x] lights - toggling `Visibility` of `DirectionalLight` in `lighting`
example
- [x] SSAO - toggling `Camera.is_active` and SSAO component in `ssao`
example
- [x] default UI camera view - toggling `Camera.is_active` (nop without
#15946 because UI defaults to some camera even if `DefaultCameraView` is
not there)
- [x] volumetric fog - toggling existence of volumetric light. Looks
like optimization, no change in behavior/visuals
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
# Objective
As discussed in #15341, ghost nodes are a contentious and experimental
feature. In the interest of enabling ecosystem experimentation, we've
decided to keep them in Bevy 0.15.
That said, we don't use them internally, and don't expect third-party
crates to support them. If the experimentation returns a negative result
(they aren't very useful, an alternative design is preferred etc) they
will be removed.
We should clearly communicate this status to users, and make sure that
users don't use ghost nodes in their projects without a very clear
understanding of what they're getting themselves into.
## Solution
To make life easy for users (and Bevy), `GhostNode` and all associated
helpers remain public and are always available.
However, actually constructing these requires enabling a feature flag
that's clearly marked as experimental. To do so, I've added a
meaningless private field.
When the feature flag is enabled, our constructs (`new` and `default`)
can be used. I've added a `new` constructor, which should be preferred
over `Default::default` as that can be readily deprecated, allowing us
to prompt users to swap over to the much nicer `GhostNode` syntax once
this is a unit struct again.
Full credit: this was mostly @cart's design: I'm just implementing it!
## Testing
I've run the ghost_nodes example and it fails to compile without the
feature flag. With the feature flag, it works fine :)
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- UI materials reserve too much capacity in a vec: for every node in the
transparent phase, it reserves enough memory to store all the nodes
- Update #10437
## Solution
- Only reserve extra memory if there's not enough
- Only reserve the needed memory, not more
# Objective
In `queue_shadows`, the `UiBoxShadows` option is unwrapped incorrectly
which results in the number of shadow samples being set to
`u32::default()` instead of `UiBoxShadows::default()` if the camera
entity doesn't have the component.
## Solution
Just use `unwrap_or_default` directly without `map`.
# Objective
Remove `bevy-ui`'s non-functional "bevy_text" feature.
Fixes#15900
## Solution
Remove all the "bevy_text" cfg gates.
I tried to fix it at first but couldn't figure it out. I'll happily
withdraw this in favour of another PR that gets the feature gate
working.
# Objective
Limited implementation of the CSS property `overflow-clip-margin`
https://developer.mozilla.org/en-US/docs/Web/CSS/overflow-clip-margin
Allows you to control the visible area for clipped content when using
overfllow-clip, -hidden, or -scroll and expand it with a margin.
Based on #15442Fixes#15468
## Solution
Adds a new field to Style: `overflow_clip_margin: OverflowClipMargin`.
The field is ignored unless overflow-clip, -hidden or -scroll is set on
at least one axis.
`OverflowClipMargin` has these associated constructor functions:
```
pub const fn content_box() -> Self;
pub const fn padding_box() -> Self;
pub const fn border_box() -> Self;
```
You can also use the method `with_margin` to increases the size of the
visible area:
```
commands
.spawn(NodeBundle {
style: Style {
width: Val::Px(100.),
height: Val::Px(100.),
padding: UiRect::all(Val::Px(20.)),
border: UiRect::all(Val::Px(5.)),
overflow: Overflow::clip(),
overflow_clip_margin: OverflowClipMargin::border_box().with_margin(25.),
..Default::default()
},
border_color: Color::BLACK.into(),
background_color: GRAY.into(),
..Default::default()
})
```
`with_margin` expects a length in logical pixels, negative values are
clamped to zero.
## Notes
* To keep this PR as simple as possible I omitted responsive margin
values support. This could be added in a follow up if we want it.
* CSS also supports a `margin-box` option but we don't have access to
the margin values in `Node` so it's probably not feasible to implement
atm.
## Testing
```cargo run --example overflow_clip_margin```
<img width="396" alt="overflow-clip-margin" src="https://github.com/user-attachments/assets/07b51cd6-a565-4451-87a0-fa079429b04b">
## Migration Guide
Style has a new field `OverflowClipMargin`. It allows users to set the visible area for clipped content when using overflow-clip, -hidden, or -scroll and expand it with a margin.
There are three associated constructor functions `content_box`, `padding_box` and `border_box`:
* `content_box`: elements painted outside of the content box area (the innermost part of the node excluding the padding and border) of the node are clipped. This is the new default behaviour.
* `padding_box`: elements painted outside outside of the padding area of the node are clipped.
* `border_box`: elements painted outside of the bounds of the node are clipped. This matches the behaviour from Bevy 0.14.
There is also a `with_margin` method that increases the size of the visible area by the given number in logical pixels, negative margin values are clamped to zero.
`OverflowClipMargin` is ignored unless overflow-clip, -hidden or -scroll is also set on at least one axis of the UI node.
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
This is 3 of 5 iterative PR's that affect bevy_ui/layout
- [x] Blocked by https://github.com/bevyengine/bevy/pull/12801
- [x] Blocked by https://github.com/bevyengine/bevy/pull/12802
---
# Objective
- Add tests to `UiSurface`
- Add missing asserts in `_assert_send_sync_ui_surface_impl_safe`
- Add missing Debug field print for `camera_entity_to_taffy`
## Solution
- Adds tests to `UiSurface`
- Adds missing asserts in `_assert_send_sync_ui_surface_impl_safe`
- Adds missing impl Debug field print for `camera_entity_to_taffy`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Cleanup naming and docs, add missing migration guide after #15591
All text root nodes now use `Text` (UI) / `Text2d`.
All text readers/writers use `Text<Type>Reader`/`Text<Type>Writer`
convention.
---
## Migration Guide
Doubles as #15591 migration guide.
Text bundles (`TextBundle` and `Text2dBundle`) were removed in favor of
`Text` and `Text2d`.
Shared configuration fields were replaced with `TextLayout`, `TextFont`
and `TextColor` components.
Just `TextBundle`'s additional field turned into `TextNodeFlags`
component,
while `Text2dBundle`'s additional fields turned into `TextBounds` and
`Anchor` components.
Text sections were removed in favor of hierarchy-based approach.
For root text entities with `Text` or `Text2d` components, child
entities with `TextSpan` will act as additional text sections.
To still access text spans by index, use the new `TextUiReader`,
`Text2dReader` and `TextUiWriter`, `Text2dWriter` system parameters.
# Objective
Change UI clipping to respect borders and padding.
Fixes#15335
## Solution
Based on #15163
1. Add a `padding` field to `Node`.
2. In `ui_layout_size` copy the padding values from taffy to
`Node::padding`.
4. Determine the node's content box (The innermost part of the node
excluding the padding and border).
5. In `update_clipping` perform the clipping intersection with the
node's content box.
## Notes
* `Rect` probably needs some helper methods for working with insets but
because `Rect` and `BorderRect` are in different crates it's awkward to
add them. Left for a follow up.
* We could have another `Overflow` variant (probably called
`Overflow::Hidden`) to that clips inside of the border box instead of
the content box. Left it out here as I'm not certain about the naming or
behaviour though. If this PR is adopted, it would be trivial to add a
`Hidden` variant in a follow up.
* Depending on UI scaling there are sometimes gaps in the layout:
<img width="532" alt="rounding-bug"
src="https://github.com/user-attachments/assets/cc29aa0d-44fe-403f-8f0e-cd28a8b1d1b3">
This is caused by existing bugs in `ui_layout_system`'s coordinates
rounding and not anything to do with the changes in this PR.
## Testing
This PR also changes the `overflow` example to display borders on the
overflow nodes so you can see how this works:
#### main (The image is clipped at the edges of the node, overwriting
the border).
<img width="722" alt="main_overflow"
src="https://github.com/user-attachments/assets/eb316cd0-fff8-46ee-b481-e0cd6bab3f5c">
#### this PR (The image is clipped at the edges of the node's border).
<img width="711" alt="content-box-clip"
src="https://github.com/user-attachments/assets/fb302e56-9302-47b9-9a29-ec3e15fe9a9f">
## Migration Guide
Migration guide is on #15561
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
Another clippy-lint fix: the goal is so that `ci lints` actually
displays the problems that a contributor caused, and not a bunch of
existing stuff in the repo. (when run on nightly)
## Solution
This fixes all but the `clippy::needless_lifetimes` lint, which will
result in substantially more fixes and be in other PR(s). I also
explicitly allow `non_local_definitions` since it is [not working
correctly, but will be
fixed](https://github.com/rust-lang/rust/issues/131643).
A few things were manually fixed: for example, some places had an
explicitly defined `div_ceil` function that was used, which is no longer
needed since this function is stable on unsigned integers. Also, empty
lines in doc comments were handled individually.
## Testing
I ran `cargo clippy --workspace --all-targets --all-features --fix
--allow-staged` with the `clippy::needless_lifetimes` lint marked as
`allow` in `Cargo.toml` to avoid fixing that too. It now passes with all
but the listed lint.
# Objective
#15320 is a particularly painful breaking change, and the new
`RenderEntity` in particular is very noisy, with a lot of `let entity =
entity.id()` spam.
## Solution
Implement `WorldQuery`, `QueryData` and `ReadOnlyQueryData` for
`RenderEntity` and `WorldEntity`.
These work the same as the `Entity` impls from a user-facing
perspective: they simply return an owned (copied) `Entity` identifier.
This dramatically reduces noise and eases migration.
Under the hood, these impls defer to the implementations for `&T` for
everything other than the "call .id() for the user" bit, as they involve
read-only access to component data. Doing it this way (as opposed to
implementing a custom fetch, as tried in the first commit) dramatically
reduces the maintenance risk of complex unsafe code outside of
`bevy_ecs`.
To make this easier (and encourage users to do this themselves!), I've
made `ReadFetch` and `WriteFetch` slightly more public: they're no
longer `doc(hidden)`. This is a good change, since trying to vendor the
logic is much worse than just deferring to the existing tested impls.
## Testing
I've run a handful of rendering examples (breakout, alien_cake_addict,
auto_exposure, fog_volumes, box_shadow) and nothing broke.
## Follow-up
We should lint for the uses of `&RenderEntity` and `&MainEntity` in
queries: this is just less nice for no reason.
---------
Co-authored-by: Trashtalk217 <trashtalk217@gmail.com>
# Objective
With the warning removed in
https://github.com/bevyengine/bevy/pull/15736, the rules for the UI tree
changes.
We no longer need to traverse non `Node`/`GhostNode` entities.
## Solution
- Added a filter `Or<(With<Node>, With<GhostNode>)>` to the child
traversal query so we don't unnecessarily traverse nodes that are not
part of the UI tree (like text nodes).
- Also moved the warning for NoUI->UI entities so it is actually
triggered (see comments)
## Testing
- Ran unit tests (still passing)
- Ran the ghost_nodes and ui examples, still works and looks fine 👍
- Tested the warning by spawning a Node under an empty entity.
---
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
Currently text is recomputed unnecessarily on any changes to its color,
which is extremely expensive.
## Solution
Split up `TextStyle` into two separate components `TextFont` and
`TextColor`.
## Testing
I added this system to `many_buttons`:
```rust
fn set_text_colors_changed(mut colors: Query<&mut TextColor>) {
for mut text_color in colors.iter_mut() {
text_color.set_changed();
}
}
```
reports ~4fps on main, ~50fps with this PR.
## Migration Guide
`TextStyle` has been renamed to `TextFont` and its `color` field has
been moved to a separate component named `TextColor` which newtypes
`Color`.
# Objective
In the Render World, there are a number of collections that are derived
from Main World entities and are used to drive rendering. The most
notable are:
- `VisibleEntities`, which is generated in the `check_visibility` system
and contains visible entities for a view.
- `ExtractedInstances`, which maps entity ids to asset ids.
In the old model, these collections were trivially kept in sync -- any
extracted phase item could look itself up because the render entity id
was guaranteed to always match the corresponding main world id.
After #15320, this became much more complicated, and was leading to a
number of subtle bugs in the Render World. The main rendering systems,
i.e. `queue_material_meshes` and `queue_material2d_meshes`, follow a
similar pattern:
```rust
for visible_entity in visible_entities.iter::<With<Mesh2d>>() {
let Some(mesh_instance) = render_mesh_instances.get_mut(visible_entity) else {
continue;
};
// Look some more stuff up and specialize the pipeline...
let bin_key = Opaque2dBinKey {
pipeline: pipeline_id,
draw_function: draw_opaque_2d,
asset_id: mesh_instance.mesh_asset_id.into(),
material_bind_group_id: material_2d.get_bind_group_id().0,
};
opaque_phase.add(
bin_key,
*visible_entity,
BinnedRenderPhaseType::mesh(mesh_instance.automatic_batching),
);
}
```
In this case, `visible_entities` and `render_mesh_instances` are both
collections that are created and keyed by Main World entity ids, and so
this lookup happens to work by coincidence. However, there is a major
unintentional bug here: namely, because `visible_entities` is a
collection of Main World ids, the phase item being queued is created
with a Main World id rather than its correct Render World id.
This happens to not break mesh rendering because the render commands
used for drawing meshes do not access the `ItemQuery` parameter, but
demonstrates the confusion that is now possible: our UI phase items are
correctly being queued with Render World ids while our meshes aren't.
Additionally, this makes it very easy and error prone to use the wrong
entity id to look up things like assets. For example, if instead we
ignored visibility checks and queued our meshes via a query, we'd have
to be extra careful to use `&MainEntity` instead of the natural
`Entity`.
## Solution
Make all collections that are derived from Main World data use
`MainEntity` as their key, to ensure type safety and avoid accidentally
looking up data with the wrong entity id:
```rust
pub type MainEntityHashMap<V> = hashbrown::HashMap<MainEntity, V, EntityHash>;
```
Additionally, we make all `PhaseItem` be able to provide both their Main
and Render World ids, to allow render phase implementors maximum
flexibility as to what id should be used to look up data.
You can think of this like tracking at the type level whether something
in the Render World should use it's "primary key", i.e. entity id, or
needs to use a foreign key, i.e. `MainEntity`.
## Testing
##### TODO:
This will require extensive testing to make sure things didn't break!
Additionally, some extraction logic has become more complicated and
needs to be checked for regressions.
## Migration Guide
With the advent of the retained render world, collections that contain
references to `Entity` that are extracted into the render world have
been changed to contain `MainEntity` in order to prevent errors where a
render world entity id is used to look up an item by accident. Custom
rendering code may need to be changed to query for `&MainEntity` in
order to look up the correct item from such a collection. Additionally,
users who implement their own extraction logic for collections of main
world entity should strongly consider extracting into a different
collection that uses `MainEntity` as a key.
Additionally, render phases now require specifying both the `Entity` and
`MainEntity` for a given `PhaseItem`. Custom render phases should ensure
`MainEntity` is available when queuing a phase item.
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
The UI text rendering is really slow because it extracts each glyph as a
separate ui node even though all the glyphs in a text section have the
same texture, color and clipping rects.
## Solution
Store the glyphs in a seperate contiguous array, queue one transparent
ui item per text section which has indices into the glyph array.
## Testing
```cargo run --example many_glyphs --release```
Runs at about 22fps on main and 95fps with this PR on my computer.
I'll do some proper comparisons once I work out why tracy 11 is refusing to run.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
Fixes#15560
Fixes (most of) #15570
Currently a lot of examples (and presumably some user code) depend on
toggling certain render features by adding/removing a single component
to an entity, e.g. `SpotLight` to toggle a light. Because of the
retained render world this no longer works: Extract will add any new
components, but when it is removed the entity persists unchanged in the
render world.
## Solution
Add `SyncComponentPlugin<C: Component>` that registers
`SyncToRenderWorld` as a required component for `C`, and adds a
component hook that will clear all components from the render world
entity when `C` is removed. We add this plugin to
`ExtractComponentPlugin` which fixes most instances of the problem. For
custom extraction logic we can manually add `SyncComponentPlugin` for
that component.
We also rename `WorldSyncPlugin` to `SyncWorldPlugin` so we start a
naming convention like all the `Extract` plugins.
In this PR I also fixed a bunch of breakage related to the retained
render world, stemming from old code that assumed that `Entity` would be
the same in both worlds.
I found that using the `RenderEntity` wrapper instead of `Entity` in
data structures when referring to render world entities makes intent
much clearer, so I propose we make this an official pattern.
## Testing
Run examples like
```
cargo run --features pbr_multi_layer_material_textures --example clearcoat
cargo run --example volumetric_fog
```
and see that they work, and that toggles work correctly. But really we
should test every single example, as we might not even have caught all
the breakage yet.
---
## Migration Guide
The retained render world notes should be updated to explain this edge
case and `SyncComponentPlugin`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Trashtalk217 <trashtalk217@gmail.com>
# Objective
As discussed in #15591, this warning prevents us from storing leaf nodes
without a `Style` component. Because text sections (as distinct
entities) should not be laid out using `taffy`, this warning is
incorrect.
Users may also have other uses for doing this, and this should generally
increase flexibility without posing particularly serious correctness
concerns.
## Solution
- removed warning about non-UI children with UI parents
- improved the warning about UI parents with non-UI parents
- this warning should stay, for now, as it results in a genuine failure
to perform `taffy` layout
- that said, we should be clearer about the cause and potentially
harmful results of this!
## Testing
I inserted an empty entity into the hierarchy in the `button` example as
a leaf node, and it ran with no warnings.
# Objective
- Closes#15720
## Solution
Wrap the handle in a new wrapper component: `UiMaterialHandle`
It's not possible to match the naming convention of `MeshMaterial3d/2d`
here with the trait already being called `UiMaterial`
Should we consider renaming to `Material3d/2dHandle` and `Mesh3d/2d` to
`Mesh3d/2dHandle`?
- This shouldn't have any merge conflicts with #15591
## Testing
Tested the `ui_material` example
## Migration Guide
Let's defer the migration guide to the required component port. I just
want to yeet the `Component` impl on `Handle` in the meantime :)
# Objective
UI box shadow support
Adds a new component `BoxShadow`:
```rust
pub struct BoxShadow {
/// The shadow's color
pub color: Color,
/// Horizontal offset
pub x_offset: Val,
/// Vertical offset
pub y_offset: Val,
/// Horizontal difference in size from the occluding uninode
pub spread_radius: Val,
/// Blurriness of the shadow
pub blur_radius: Val,
}
```
To use `BoxShadow`, add the component to any Bevy UI node and a shadow
will be drawn beneath that node.
Also adds a resource `BoxShadowSamples` that can be used to adjust the
shadow quality.
#### Notes
* I'm not super happy with the field names. Maybe we need a `struct Size
{ width: Val, height: Val }` type or something.
* The shader isn't very optimised but I don't see that it's too
important for now as the number of shadows being rendered is not going
to be massive most of the time. I think it's more important to get the
API and geometry correct with this PR.
* I didn't implement an inset property, it's not essential and can
easily be added in a follow up.
* Shadows are only rendered for uinodes, not for images or text.
* Batching isn't supported, it would need out-of-the-scope-of-this-pr
changes to the way the UI handles z-ordering for it to be effective.
# Showcase
```cargo run --example box_shadow -- --samples 4```
<img width="391" alt="br" src="https://github.com/user-attachments/assets/4e8add96-dc93-46e0-9e35-d995eb0943ad">
```cargo run --example box_shadow -- --samples 10```
<img width="391" alt="s10"
src="https://github.com/user-attachments/assets/ecb384c9-4012-4cd6-9dea-5180904bf28e">
# Objective
- Rename `Pickable` to `PickingBehavior` to counter the easily-made
assumption that the component is required. It is optional
- Fix and clarify documentation
- The docs in `crates/bevy_ui/src/picking_backend.rs` were incorrect
about the necessity of `Pickable`
- Plus two minor code quality changes in this commit
(7c2e75f48d)
Closes#15632
# Objective
After merging retained rendering world #15320, we now have a good way of
creating a link between worlds (*HIYAA intensifies*). This means that
`get_or_spawn` is no longer necessary for that function. Entity should
be opaque as the warning above `get_or_spawn` says. This is also part of
#15459.
I'm deprecating `get_or_spawn_batch` in a different PR in order to keep
the PR small in size.
## Solution
Deprecate `get_or_spawn` and replace it with `get_entity` in most
contexts. If it's possible to query `&RenderEntity`, then the entity is
synced and `render_entity.id()` is initialized in the render world.
## Migration Guide
If you are given an `Entity` and you want to do something with it, use
`Commands.entity(...)` or `World.entity(...)`. If instead you want to
spawn something use `Commands.spawn(...)` or `World.spawn(...)`. If you
are not sure if an entity exists, you can always use `get_entity` and
match on the `Option<...>` that is returned.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
Fixes#14511.
`despawn` allows you to remove entities from the world. However, if the
entity does not exist, it emits a warning. This may not be intended
behavior for many users who have use cases where they need to call
`despawn` regardless of if the entity actually exists (see the issue),
or don't care in general if the entity already doesn't exist.
(Also trying to gauge interest on if this feature makes sense, I'd
personally love to have it, but I could see arguments that this might be
a footgun. Just trying to help here 😄 If there's no contention I could
also implement this for `despawn_recursive` and `despawn_descendants` in
the same PR)
## Solution
Add `try_despawn`, `try_despawn_recursive` and
`try_despawn_descendants`.
Modify `World::despawn_with_caller` to also take in a `warn` boolean
argument, which is then considered when logging the warning. Set
`log_warning` to `true` in the case of `despawn`, and `false` in the
case of `try_despawn`.
## Testing
Ran `cargo run -p ci` on macOS, it seemed fine.
As discussed in #15521
- Partial revert of #14897, reverting the change to the methods to
consume `self`
- The `insert_if` method is kept
The migration guide of #14897 should be removed
Closes#15521
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Fixes#14826
- For context, see #15238
## Solution
Add a `GhostNode` component to `bevy_ui` and update all the relevant
systems to use it to traverse for UI children.
- [x] `ghost_hierarchy` module
- [x] Add `GhostNode`
- [x] Add `UiRootNodes` system param for iterating (ghost-aware) UI root
nodes
- [x] Add `UiChildren` system param for iterating (ghost-aware) UI
children
- [x] Update `layout::ui_layout_system`
- [x] Use ghost-aware root nodes for camera updates
- [x] Update and remove children in taffy
- [x] Initial spawn
- [x] Detect changes on nested UI children
- [x] Use ghost-aware children traversal in
`update_uinode_geometry_recursive`
- [x] Update the rest of the UI systems to use the ghost hierarchy
- [x] `stack::ui_stack_system`
- [x] `update::`
- [x] `update_clipping_system`
- [x] `update_target_camera_system`
- [x] `accessibility::calc_name`
## Testing
- [x] Added a new example `ghost_nodes` that can be used as a testbed.
- [x] Added unit tests for _some_ of the traversal utilities in
`ghost_hierarchy`
- [x] Ensure this fulfills the needs for currently known use cases
- [x] Reactivity libraries (test with `bevy_reactor`)
- [ ] Text spans (mentioned by koe [on
discord](https://discord.com/channels/691052431525675048/1285371432460881991/1285377442998915246))
---
## Performance
[See comment
below](https://github.com/bevyengine/bevy/pull/15341#issuecomment-2385456820)
## Migration guide
Any code that previously relied on `Parent`/`Children` to iterate UI
children may now want to use `bevy_ui::UiChildren` to ensure ghost nodes
are skipped, and their first descendant Nodes included.
UI root nodes may now be children of ghost nodes, which means
`Without<Parent>` might not query all root nodes. Use
`bevy_ui::UiRootNodes` where needed to iterate root nodes instead.
## Potential future work
- Benchmarking/optimizations of hierarchies containing lots of ghost
nodes
- Further exploration of UI hierarchies and markers for root nodes/leaf
nodes to create better ergonomics for things like `UiLayer` (world-space
ui)
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
- Improve code quality in preparation for
https://github.com/bevyengine/bevy/discussions/15014
## Solution
- Rename BreakLineOn to LineBreak.
## Migration Guide
`BreakLineOn` was renamed to `LineBreak`, and paramters named
`linebreak_behavior` were renamed to `linebreak`.
- Adopted from #14449
- Still fixes#12144.
## Migration Guide
The retained render world is a complex change: migrating might take one
of a few different forms depending on the patterns you're using.
For every example, we specify in which world the code is run. Most of
the changes affect render world code, so for the average Bevy user who's
using Bevy's high-level rendering APIs, these changes are unlikely to
affect your code.
### Spawning entities in the render world
Previously, if you spawned an entity with `world.spawn(...)`,
`commands.spawn(...)` or some other method in the rendering world, it
would be despawned at the end of each frame. In 0.15, this is no longer
the case and so your old code could leak entities. This can be mitigated
by either re-architecting your code to no longer continuously spawn
entities (like you're used to in the main world), or by adding the
`bevy_render::world_sync::TemporaryRenderEntity` component to the entity
you're spawning. Entities tagged with `TemporaryRenderEntity` will be
removed at the end of each frame (like before).
### Extract components with `ExtractComponentPlugin`
```
// main world
app.add_plugins(ExtractComponentPlugin::<ComponentToExtract>::default());
```
`ExtractComponentPlugin` has been changed to only work with synced
entities. Entities are automatically synced if `ComponentToExtract` is
added to them. However, entities are not "unsynced" if any given
`ComponentToExtract` is removed, because an entity may have multiple
components to extract. This would cause the other components to no
longer get extracted because the entity is not synced.
So be careful when only removing extracted components from entities in
the render world, because it might leave an entity behind in the render
world. The solution here is to avoid only removing extracted components
and instead despawn the entire entity.
### Manual extraction using `Extract<Query<(Entity, ...)>>`
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(Entity, &Clusters, &Camera)>>,
) {
for (entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(entity).insert(...);
}
}
```
One of the primary consequences of the retained rendering world is that
there's no longer a one-to-one mapping from entity IDs in the main world
to entity IDs in the render world. Unlike in Bevy 0.14, Entity 42 in the
main world doesn't necessarily map to entity 42 in the render world.
Previous code which called `get_or_spawn(main_world_entity)` in the
render world (`Extract<Query<(Entity, ...)>>` returns main world
entities). Instead, you should use `&RenderEntity` and
`render_entity.id()` to get the correct entity in the render world. Note
that this entity does need to be synced first in order to have a
`RenderEntity`.
When performing manual abstraction, this won't happen automatically
(like with `ExtractComponentPlugin`) so add a `SyncToRenderWorld` marker
component to the entities you want to extract.
This results in the following code:
```rust
// in render world, inspired by bevy_pbr/src/cluster/mod.rs
pub fn extract_clusters(
mut commands: Commands,
views: Extract<Query<(&RenderEntity, &Clusters, &Camera)>>,
) {
for (render_entity, clusters, camera) in &views {
// some code
commands.get_or_spawn(render_entity.id()).insert(...);
}
}
// in main world, when spawning
world.spawn(Clusters::default(), Camera::default(), SyncToRenderWorld)
```
### Looking up `Entity` ids in the render world
As previously stated, there's now no correspondence between main world
and render world `Entity` identifiers.
Querying for `Entity` in the render world will return the `Entity` id in
the render world: query for `MainEntity` (and use its `id()` method) to
get the corresponding entity in the main world.
This is also a good way to tell the difference between synced and
unsynced entities in the render world, because unsynced entities won't
have a `MainEntity` component.
---------
Co-authored-by: re0312 <re0312@outlook.com>
Co-authored-by: re0312 <45868716+re0312@users.noreply.github.com>
Co-authored-by: Periwink <charlesbour@gmail.com>
Co-authored-by: Anselmo Sampietro <ans.samp@gmail.com>
Co-authored-by: Emerson Coskey <56370779+ecoskey@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
`ui_stack_system` generates a tree of `StackingContexts` which it then
flattens to get the `UiStack`.
But there's no need to construct a new tree. We can query for nodes with
a global `ZIndex`, add those nodes to the root nodes list and then build
the `UiStack` from a walk of the existing layout tree, ignoring any
branches that have a global `Zindex`.
Fixes#9877
## Solution
Split the `ZIndex` enum into two separate components, `ZIndex` and
`GlobalZIndex`
Query for nodes with a `GlobalZIndex`, add those nodes to the root nodes
list and then build the `UiStack` from a walk of the existing layout
tree, filtering branches by `Without<GlobalZIndex>` so we don't revisit
nodes.
```
cargo run --profile stress-test --features trace_tracy --example many_buttons
```
<img width="672" alt="ui-stack-system-walk-split-enum"
src="https://github.com/bevyengine/bevy/assets/27962798/11e357a5-477f-4804-8ada-c4527c009421">
(Yellow is this PR, red is main)
---
## Changelog
`Zindex`
* The `ZIndex` enum has been split into two separate components `ZIndex`
(which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces
`ZIndex::Global`). An entity can have both a `ZIndex` and
`GlobalZIndex`, in comparisons `ZIndex` breaks ties if two
`GlobalZIndex` values are equal.
`ui_stack_system`
* Instead of generating a tree of `StackingContexts`, query for nodes
with a `GlobalZIndex`, add those nodes to the root nodes list and then
build the `UiStack` from a walk of the existing layout tree, filtering
branches by `Without<GlobalZIndex` so we don't revisit nodes.
## Migration Guide
The `ZIndex` enum has been split into two separate components `ZIndex`
(which replaces `ZIndex::Local`) and `GlobalZIndex` (which replaces
`ZIndex::Global`). An entity can have both a `ZIndex` and
`GlobalZIndex`, in comparisons `ZIndex` breaks ties if two
`GlobalZindex` values are equal.
---------
Co-authored-by: Gabriel Bourgeois <gabriel.bourgeoisv4si@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
Fixes#15394
## Solution
Observers now validate params.
System registry has a new error variant for when system running fails
due to invalid parameters.
Run once now returns a `Result<Out, RunOnceError>` instead of `Out`.
This is more inline with system registry, which also returns a result.
I'll address warning messages in #15500.
## Testing
Added one test for each case.
---
## Migration Guide
- `RunSystemOnce::run_system_once` and
`RunSystemOnce::run_system_once_with` now return a `Result<Out>` instead
of just `Out`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- Fixes#6370
- Closes#6581
## Solution
- Added the following lints to the workspace:
- `std_instead_of_core`
- `std_instead_of_alloc`
- `alloc_instead_of_core`
- Used `cargo +nightly fmt` with [item level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Item%5C%3A)
to split all `use` statements into single items.
- Used `cargo clippy --workspace --all-targets --all-features --fix
--allow-dirty` to _attempt_ to resolve the new linting issues, and
intervened where the lint was unable to resolve the issue automatically
(usually due to needing an `extern crate alloc;` statement in a crate
root).
- Manually removed certain uses of `std` where negative feature gating
prevented `--all-features` from finding the offending uses.
- Used `cargo +nightly fmt` with [crate level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Crate%5C%3A)
to re-merge all `use` statements matching Bevy's previous styling.
- Manually fixed cases where the `fmt` tool could not re-merge `use`
statements due to conditional compilation attributes.
## Testing
- Ran CI locally
## Migration Guide
The MSRV is now 1.81. Please update to this version or higher.
## Notes
- This is a _massive_ change to try and push through, which is why I've
outlined the semi-automatic steps I used to create this PR, in case this
fails and someone else tries again in the future.
- Making this change has no impact on user code, but does mean Bevy
contributors will be warned to use `core` and `alloc` instead of `std`
where possible.
- This lint is a critical first step towards investigating `no_std`
options for Bevy.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Fixes#15142
## Solution
* Moved all the UI border geometry calculations that were scattered
through the UI extraction functions into `ui_layout_system`.
* Added a `border: BorderRect` field to `Node` to store the border size
computed by `ui_layout_system`.
* Use the border values returned from Taffy rather than calculate them
ourselves during extraction.
* Removed the `logical_rect` and `physical_rect` methods from `Node` the
descriptions and namings are deceptive, it's better to create the rects
manually instead.
* Added a method `outline_radius` to `Node` that calculates the border
radius of outlines.
* For border values `ExtractedUiNode` takes `BorderRect` and
`ResolvedBorderRadius` now instead of raw `[f32; 4]` values and converts
them in `prepare_uinodes`.
* Removed some unnecessary scaling and clamping of border values
(#15142).
* Added a `BorderRect::ZERO` constant.
* Added an `outlined_node_size` method to `Node`.
## Testing
Added some non-uniform borders to the border example. Everything seems
to be in order:
<img width="626" alt="nub"
src="https://github.com/user-attachments/assets/258ed8b5-1a9e-4ac5-99c2-6bf25c0ef31c">
## Migration Guide
The `logical_rect` and `physical_rect` methods have been removed from
`Node`. Use `Rect::from_center_size` with the translation and node size
instead.
The types of the fields border and border_radius of `ExtractedUiNode`
have been changed to `BorderRect` and `ResolvedBorderRadius`
respectively.
---------
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
Co-authored-by: akimakinai <105044389+akimakinai@users.noreply.github.com>
# Objective
- Fixes#10720
- Adds the ability to control font smoothing of rendered text
## Solution
- Introduce the `FontSmoothing` enum, with two possible variants
(`FontSmoothing::None` and `FontSmoothing::AntiAliased`):
- This is based on `-webkit-font-smoothing`, in line with our practice
of adopting CSS-like properties/names for UI;
- I could have gone instead for the [`font-smooth`
property](https://developer.mozilla.org/en-US/docs/Web/CSS/font-smooth)
that's also supported by browsers, but didn't since it's also
non-standard, has an uglier name, and doesn't allow controlling the type
of antialias applied.
- Having an enum instead of e.g. a boolean, leaves the path open for
adding `FontSmoothing::SubpixelAntiAliased` in the future, without a
breaking change;
- Add all the necessary plumbing to get the `FontSmoothing` information
to where we rasterize the glyphs and store them in the atlas;
- Change the font atlas key to also take into account the smoothing
setting, not only font and font size;
- Since COSMIC Text [doesn't support controlling font
smoothing](https://github.com/pop-os/cosmic-text/issues/279), we roll
out our own threshold-based “implementation”:
- This has the downside of **looking ugly for “regular” vector fonts**
⚠️, since it doesn't properly take the hinting information into account
like a proper implementation on the rasterizer side would.
- However, **for fonts that have been specifically authored to be pixel
fonts, (a common use case in games!) this is not as big of a problem**,
since all lines are vertical/horizontal, and close to the final pixel
boundaries (as long as the font is used at a multiple of the size
originally intended by the author)
- Once COSMIC exposes this functionality, we can switch to using it
directly, and get better results;
- Use a nearest neighbor sampler for atlases with font smoothing
disabled, so that you can scale the text via transform and still get the
pixelated look;
- Add a convenience method to `Text` for setting the font smoothing;
- Add a demonstration of using the `FontSmoothing` property to the
`text2d` example.
## Testing
- Did you test these changes? If so, how?
- Yes. Via the `text2d`example, and also in my game.
- Are there any parts that need more testing?
- I'd like help from someone for testing this on devices/OSs with
fractional scaling (Android/Windows)
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Both via the `text2d` example and also by using it directly on your
projects.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- macOS
---
## Showcase
```rust
commands.spawn(Text2dBundle {
text: Text::from_section("Hello, World!", default())
.with_font_smoothing(FontSmoothing::None),
..default()
});
```
<img width="740" alt="image"
src="https://github.com/user-attachments/assets/b881b02c-4e43-410b-902f-6985c25140fc">
## Migration Guide
- `Text` now contains a `font_smoothing: FontSmoothing` property, make
sure to include it or add `..default()` when using the struct directly;
- `FontSizeKey` has been renamed to `FontAtlasKey`, and now also
contains the `FontSmoothing` setting;
- The following methods now take an extra `font_smoothing:
FontSmoothing` argument:
- `FontAtlas::new()`
- `FontAtlasSet::add_glyph_to_atlas()`
- `FontAtlasSet::get_glyph_atlas_info()`
- `FontAtlasSet::get_outlined_glyph_texture()`
# Objective
- Fixes#8074
- Adopts / Supersedes #8104
## Solution
Adapted from #8104 and affords the same benefits.
**Additions**
- [x] Update scrolling on relayout (height of node or contents may have
changed)
- [x] Make ScrollPosition component optional for ui nodes to avoid
checking every node on scroll
- [x] Nested scrollviews
**Omissions**
- Removed input handling for scrolling from `bevy_ui`. Users should
update `ScrollPosition` directly.
### Implementation
Adds a new `ScrollPosition` component. Updating this component on a
`Node` with an overflow axis set to `OverflowAxis::Scroll` will
reposition its children by that amount when calculating node transforms.
As before, no impact on the underlying Taffy layout.
Calculating this correctly is trickier than it was in #8104 due to
`"Update scrolling on relayout"`.
**Background**
When `ScrollPosition` is updated directly by the user, it can be
trivially handled in-engine by adding the parent's scroll position to
the final location of each child node. However, _other layout actions_
may result in a situation where `ScrollPosition` needs to be updated.
Consider a 1000 pixel tall vertically scrolling list of 100 elements,
each 100 pixels tall. Scrolled to the bottom, the
`ScrollPosition.offset_y` is 9000, just enough to display the last
element in the list. When removing an element from that list, the new
desired `ScrollPosition.offset_y` is 8900, but, critically, that is not
known until after the sizes and positions of the children of the
scrollable node are resolved.
All user scrolling code today handles this by delaying the resolution by
one frame. One notable disadvantage of this is the inability to support
`WinitSettings::desktop_app()`, since there would need to be an input
AFTER the layout change that caused the scroll position to update for
the results of the scroll position update to render visually.
I propose the alternative in this PR, which allows for same-frame
resolution of scrolling layout.
**Resolution**
_Edit: Below resolution is outdated, and replaced with the simpler usage
of taffy's `Layout::content_size`._
When recursively iterating the children of a node, each child now
returns a `Vec2` representing the location of their own bottom right
corner. Then, `[[0,0, [x,y]]` represents a bounding box containing the
scrollable area filled by that child. Scrollable parents aggregate those
areas into the bounding box of _all_ children, then consider that result
against `ScrollPosition` to ensure its validity.
In the event that resolution of the layout of the children invalidates
the `ScrollPosition` (e.g. scrolled further than there were children to
scroll to), _all_ children of that node must be recursively
repositioned. The position of each child must change as a result of the
change in scroll position.
Therefore, this implementation takes care to only spend the cost of the
"second layout pass" when a specific node actually had a
`ScrollPosition` forcibly updated by the layout of its children.
## Testing
Examples in `ui/scroll.rs`. There may be more complex node/style
interactions that were unconsidered.
---
## Showcase
## Alternatives
- `bevy_ui` doesn't support scrolling.
- `bevy_ui` implements scrolling with a one-frame delay on reactions to
layout changes.
# Objective
Fixes#15306
## Solution
- Add feature gate on the module and the place where each one is used
- Declare the features and make them default
## Testing
- CI
# Objective
Fixes#15330
## Solution
1. Add an `ExtractTextureSlice` variant to `RenderUiSystem`.
2. Add `RenderUiSystem::ExtractTextureSlice` to the `ExtractSchedule`
between `ExtractImages` and `ExtractBorders`.
3. Add `extract_ui_texture_slices` to the new `ExtractTextureSlice`
system set.
Which results in texture slice nodes being extracted before borders. No
more z-fighting, borders will always be drawn on top of texture-sliced
images.
# Objective
> Rust 1.81 released the #[expect(...)] attribute, which works like
#[allow(...)] but throws a warning if the lint isn't raised. This is
preferred to #[allow(...)] because it tells us when it can be removed.
- Adopts the parts of #15118 that are complete, and updates the branch
so it can be merged.
- There were a few conflicts, let me know if I misjudged any of 'em.
Alice's
[recommendation](https://github.com/bevyengine/bevy/issues/15059#issuecomment-2349263900)
seems well-taken, let's do this crate by crate now that @BD103 has done
the lion's share of this!
(Relates to, but doesn't yet completely finish #15059.)
Crates this _doesn't_ cover:
- bevy_input
- bevy_gilrs
- bevy_window
- bevy_winit
- bevy_state
- bevy_render
- bevy_picking
- bevy_core_pipeline
- bevy_sprite
- bevy_text
- bevy_pbr
- bevy_ui
- bevy_gltf
- bevy_gizmos
- bevy_dev_tools
- bevy_internal
- bevy_dylib
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Ben Frankel <ben.frankel7@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
# Objective
Currently, UI is always rendered with anti-aliasing. This makes bevy's
UI completely unsuitable for art-styles that demands hard pixelated
edges, such as retro-style games.
## Solution
Add a component for disabling anti-aliasing in UI.
## Testing
In
[`examples/ui/button.rs`](15e246eff8/examples/ui/button.rs),
add the component to the camera like this:
```rust
use bevy::{prelude::*, ui::prelude::*};
commands.spawn((Camera2dBundle::default(), UiAntiAlias::Off));
```
The rounded button will now render without anti-aliasing.
## Showcase
An example of a rounded UI node rendered without anti-aliasing, with and
without borders:
# Objective
Fixes #15115
## Solution
Retrieve the size of the node's parent in a separate query and base
percentage border values on the parent node's width (or the width of the
viewport in the case of root nodes).
# Objective
`ExtractedUiMaterialNode` is still walking the whole `UiStack`.
more info: https://github.com/bevyengine/bevy/pull/9853
## Solution
Retrieve the `stack_index` from the `Node` component instead.
Also changed the `stack_index` field of `ExtractedUiMaterialNode` to
`u32`.
# Objective
Simplify `pick_rounded_rect` with multiple `if` statements to make it
more readable and efficient([Godbolt
link](https://godbolt.org/z/W5vPEvT5c)).
Co-authored-by: WX\shixi <shixi1@cnwxsoft.com>
# Objective
- Crate-level prelude modules, such as `bevy_ecs::prelude`, are plagued
with inconsistency! Let's fix it!
## Solution
Format all preludes based on the following rules:
1. All preludes should have brief documentation in the format of:
> The _name_ prelude.
>
> This includes the most common types in this crate, re-exported for
your convenience.
2. All documentation should be outer, not inner. (`///` instead of
`//!`.)
3. No prelude modules should be annotated with `#[doc(hidden)]`. (Items
within them may, though I'm not sure why this was done.)
## Testing
- I manually searched for the term `mod prelude` and updated all
occurrences by hand. 🫠
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
#14957 added the `pick_rounded_rect` function to `bevy_ui` in the
`picking_backend` module, which is gated behind the `bevy_picking`
feature. This function is used in that module, as well as in the `focus`
module. The latter usage is not gated behind the `bevy_picking` feature,
causing a compile error when the feature is disabled.
## Solution
Move the `pick_rounded_rect` function out of the `picking_backend`
module, as it does not depend on anything defined in that module. I put
it in `lib.rs` but it could reasonably be moved somewhere else instead.
## Testing
Encountered this compile error in a project and confirmed that this
patch fixes it.
# Objective
Fixes#13479
This also fixes the gaps you can sometimes observe in outlines
(screenshot from main, not this PR):
<img width="636" alt="outline-gaps"
src="https://github.com/user-attachments/assets/c11dae24-20f5-4aea-8ffc-1894ad2a2b79">
The outline around the last item in each section has vertical gaps.
## Solution
Draw the outlines with corner radius using the existing border rendering
for uinodes. The outline radius is very simple to calculate. We just
take the computed border radius of the node, and if it's greater than
zero, add it to the distance from the edge of the node to the outer edge
of the node's outline.
---
## Showcase
<img width="634" alt="outlines-radius"
src="https://github.com/user-attachments/assets/1ecda26c-65c5-41ef-87e4-5d9171ddc3ae">
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
Fixes#15032
## Solution
Reimplement support for the `flip_x` and `flip_y` fields.
This doesn't flip the border geometry, I'm not really sure whether that
is desirable or not.
Also fixes a bug that was causing the side and center slices to tile
incorrectly.
### Testing
```
cargo run --example ui_texture_slice_flip_and_tile
```
## Showcase
<img width="787" alt="nearest"
src="https://github.com/user-attachments/assets/bc044bae-1748-42ba-92b5-0500c87264f6">
With tiling need to use nearest filtering to avoid bleeding between the
slices.
---------
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
As discussed in https://github.com/bevyengine/bevy/issues/7386, system
order ambiguities within `DefaultPlugins` are a source of bugs in the
engine and badly pollute diagnostic output for users.
We should eliminate them!
This PR is an alternative to #15027: with all external ambiguities
silenced, this should be much less prone to merge conflicts and the test
output should be much easier for authors to understand.
Note that system order ambiguities are still permitted in the
`RenderApp`: these need a bit of thought in terms of how to test them,
and will be fairly involved to fix. While these aren't *good*, they'll
generally only cause graphical bugs, not logic ones.
## Solution
All remaining system order ambiguities have been resolved.
Review this PR commit-by-commit to see how each of these problems were
fixed.
## Testing
`cargo run --example ambiguity_detection` passes with no panics or
logging!
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14593.
## Solution
- Add `ViewportConversionError` and return it from viewport conversion
methods on Camera.
## Testing
- I successfully compiled and ran all changed examples.
## Migration Guide
The following methods on `Camera` now return a `Result` instead of an
`Option` so that they can provide more information about failures:
- `world_to_viewport`
- `world_to_viewport_with_depth`
- `viewport_to_world`
- `viewport_to_world_2d`
Call `.ok()` on the `Result` to turn it back into an `Option`, or handle
the `Result` directly.
---------
Co-authored-by: Lixou <82600264+DasLixou@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
Fixes https://github.com/bevyengine/bevy/issues/14183
## Solution
Reimplement the UI texture atlas slicer using a shader.
The problems with #14183 could be fixed more simply by hacking around
with the coordinates and scaling but that way is very fragile and might
get broken again the next time we make changes to the layout
calculations. A shader based solution is more robust, it's impossible
for gaps to appear between the image slices with these changes as we're
only drawing a single quad.
I've not tried any benchmarks yet but it should much more efficient as
well, in the worst cases even hundreds or thousands of times faster.
Maybe could have used the UiMaterialPipeline. I wrote the shader first
and used fat vertices and then realised it wouldn't work that way with a
UiMaterial. If it's rewritten it so it puts all the slice geometry in
uniform buffer, then it might work? Adding the uniform buffer would
probably make the shader more complicated though, so don't know if it's
even worth it. Instancing is another alternative.
## Testing
The examples are working and it seems to match the old API correctly but
I've not used the texture atlas slicing API for anything before, I
reviewed the PR but that was back in January.
Needs a review by someone who knows the rendering pipeline and wgsl
really well because I don't really have any idea what I'm doing.
# Objective
The `BorderRadius` component shouldn't be required to draw borders for
nodes with sharp corners.
## Solution
Make `BorderRadius` optional in `extract_uinode_borders`'s UI node
query.
# Objective
`resolve_outlines_system` wasn't updated when multi-window support was
added and it always uses the size of the primary window when resolving
viewport coords, regardless of the layout's camera target.
Fixes#14945
## Solution
It's awkward to get the viewport size of the target for an individual
node without walking the tree or adding extra fields to `Node`, so I
removed `resolve_outlines_system` and instead the outline values are
updated in `ui_layout_system`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Avoid cloning the `CosmicBuffer` every time you create a new text
measurement.
## Solution
- Inject a buffer query when calculating layout so existing buffers can
be reused.
## Testing
- I tested the `text`, `text_debug`, and `text_wrap_debug` examples.
- I did not do a performance test.
# Objective
- Fixes#14974
## Solution
- Replace all* instances of `NonZero*` with `NonZero<*>`
## Testing
- CI passed locally.
---
## Notes
Within the `bevy_reflect` implementations for `std` types,
`impl_reflect_value!()` will continue to use the type aliases instead,
as it inappropriately parses the concrete type parameter as a generic
argument. If the `ZeroablePrimitive` trait was stable, or the macro
could be modified to accept a finite list of types, then we could fully
migrate.
