# Objective
`ThreadLocal::<T>::default()` doesn't require `T: Default`, so
`Parallel<T>` shouldn't require it either.
## Solution
- Replaced the `Default` derive with a manually specified impl.
- Added `Parallel::borrow_local_mut_or` as a non-`T: Default`-requiring
alternative to `borrow_local_mut`.
- Added `Parallel::scope_or` as a non-`T: Default`-requiring alternative
to `scope`.
# Objective
Allow combinator and pipe systems to delay validation of the second
system, while still allowing the second system to be skipped.
Fixes#18796
Allow fallible systems to be used as one-shot systems, reporting errors
to the error handler when used through commands.
Fixes#19722
Allow fallible systems to be used as run conditions, including when used
with combinators. Alternative to #19580.
Always validate parameters when calling the safe
`run_without_applying_deferred`, `run`, and `run_readonly` methods on a
`System`.
## Solution
Have `System::run_unsafe` return a `Result`.
We want pipe systems to run the first system before validating the
second, since the first system may affect whether the second system has
valid parameters. But if the second system skips then we have no output
value to return! So, pipe systems must return a `Result` that indicates
whether the second system ran.
But if we just make pipe systems have `Out = Result<B::Out>`, then
chaining `a.pipe(b).pipe(c)` becomes difficult. `c` would need to accept
the `Result` from `a.pipe(b)`, which means it would likely need to
return `Result` itself, giving `Result<Result<Out>>`!
Instead, we make *all* systems return a `Result`! We move the handling
of fallible systems from `IntoScheduleConfigs` and `IntoObserverSystem`
to `SystemParamFunction` and `ExclusiveSystemParamFunction`, so that an
infallible system can be wrapped before being passed to a combinator.
As a side effect, this enables fallible systems to be used as run
conditions and one-shot systems.
Now that the safe `run_without_applying_deferred`, `run`, and
`run_readonly` methods return a `Result`, we can have them perform
parameter validation themselves instead of requiring each caller to
remember to call them. `run_unsafe` will continue to not validate
parameters, since it is used in the multi-threaded executor when we want
to validate and run in separate tasks.
Note that this makes type inference a little more brittle. A function
that returns `Result<T>` can be considered either a fallible system
returning `T` or an infallible system returning `Result<T>` (and this is
important to continue supporting `pipe`-based error handling)! So there
are some cases where the output type of a system can no longer be
inferred. It will work fine when directly adding to a schedule, since
then the output type is fixed to `()` (or `bool` for run conditions).
And it will work fine when `pipe`ing to a system with a typed input
parameter.
I used a dedicated `RunSystemError` for the error type instead of plain
`BevyError` so that skipping a system does not box an error or capture a
backtrace.
# Objective
Let `bevy_utils` build with no default features.
`cargo build -p bevy_utils --no-default-features` currently fails with
```
error[E0433]: failed to resolve: use of unresolved module or unlinked crate `alloc`
--> crates\bevy_utils\src\debug_info.rs:1:5
|
1 | use alloc::{borrow::Cow, fmt, string::String};
| ^^^^^ use of unresolved module or unlinked crate `alloc`
|
= help: add `extern crate alloc` to use the `alloc` crate
error[E0432]: unresolved import `alloc`
--> crates\bevy_utils\src\debug_info.rs:1:5
|
1 | use alloc::{borrow::Cow, fmt, string::String};
| ^^^^^ help: a similar path exists: `core::alloc`
```
I would have expected CI to catch this earlier, but I have not
investigated why it did not.
## Solution
Wrap the parts of `DebugName` that use `Cow` and `String` in
`cfg::alloc!`.
If the `debug` feature is enabled, then `DebugName` itself stores a
`Cow`, so make the `debug` feature require `bevy_platform/alloc`.
That is, you can use `DebugName` in no-std contexts when it's just a
ZST! (I bet it's even possible to support no-std `debug` by storing
`&'static str` instead of `Cow<'static, str>`, but that seemed like too
much complexity for now.)
# Objective
- Many strings in bevy_ecs are created but only used for debug: system
name, component name, ...
- Those strings make a significant part of the final binary and are no
use in a released game
## Solution
- Use [`strings`](https://linux.die.net/man/1/strings) to find ...
strings in a binary
- Try to find where they come from
- Many are made from `type_name::<T>()` and only used in error / debug
messages
- Add a new structure `DebugName` that holds no value if `debug` feature
is disabled
- Replace `core::any::type_name::<T>()` by `DebugName::type_name::<T>()`
## Testing
Measurements were taken without the new feature being enabled by
default, to help with commands
### File Size
I tried building the `breakout` example with `cargo run --release
--example breakout`
|`debug` enabled|`debug` disabled|
|-|-|
|81621776 B|77735728B|
|77.84MB|74.13MB|
### Compilation time
`hyperfine --min-runs 15 --prepare "cargo clean && sleep 5"
'RUSTC_WRAPPER="" cargo build --release --example breakout'
'RUSTC_WRAPPER="" cargo build --release --example breakout --features
debug'`
```
breakout' 'RUSTC_WRAPPER="" cargo build --release --example breakout --features debug'
Benchmark 1: RUSTC_WRAPPER="" cargo build --release --example breakout
Time (mean ± σ): 84.856 s ± 3.565 s [User: 1093.817 s, System: 32.547 s]
Range (min … max): 78.038 s … 89.214 s 15 runs
Benchmark 2: RUSTC_WRAPPER="" cargo build --release --example breakout --features debug
Time (mean ± σ): 92.303 s ± 2.466 s [User: 1193.443 s, System: 33.803 s]
Range (min … max): 90.619 s … 99.684 s 15 runs
Summary
RUSTC_WRAPPER="" cargo build --release --example breakout ran
1.09 ± 0.05 times faster than RUSTC_WRAPPER="" cargo build --release --example breakout --features debug
```
# Objective
Fix https://github.com/bevyengine/bevy/issues/19642 by enabling e.g.
```
map.get_type::<MyType>();
```
in place of
```
map.get(&TypeId::of::<MyType>());
```
## Solution
Add an extension trait `TypeIdMapExt` with `insert_type`, `get_type`,
`get_type_mut` and `remove_type` counterparts for `insert`, `get`,
`get_mut` and `remove`.
## Testing
Doc test.
# Objective
- Fix a reference in the example usage comments of bevy_utils
Default::default
## Solution
- Just a word change in the comments
## Testing
- No actual code changes to test
# Objective
- move SyncCell and SyncUnsafeCell to bevy_platform
## Solution
- move SyncCell and SyncUnsafeCell to bevy_platform
## Testing
- cargo clippy works
# Objective
- A step towards splitting out bevy_camera from bevy_render
## Solution
- Move a shim type into bevy_utils to avoid a dependency cycle
- Manually expand Deref/DerefMut to avoid having a bevy_derive
dependency so early in the dep tree
## Testing
- It compiles
# Objective
Fix some grammatical errors: it's -> its
Not the most useful commit in the world, but I saw a couple of these and
decided to fix the lot.
## Solution
-
## Testing
-
# Objective
Now that `bevy_platform::cfg` is merged, we can start tidying up
features. This PR starts with `bevy_utils`.
## Solution
- Removed `serde` and `critical-section` features (they were just
re-exports of `bevy_platform` anyway)
- Removed `std`, `alloc` features, relying on `bevy_platform::cfg` to
check for availability.
- Added `parallel` feature to provide access to the `Parallel` type.
- Moved the `HashMap` type aliases into `map.rs` for better
organisation.
## Testing
- CI
# Objective
The goal of `bevy_platform_support` is to provide a set of platform
agnostic APIs, alongside platform-specific functionality. This is a high
traffic crate (providing things like HashMap and Instant). Especially in
light of https://github.com/bevyengine/bevy/discussions/18799, it
deserves a friendlier / shorter name.
Given that it hasn't had a full release yet, getting this change in
before Bevy 0.16 makes sense.
## Solution
- Rename `bevy_platform_support` to `bevy_platform`.
# Objective
- Contributes to #16877
## Solution
- Moved `hashbrown`, `foldhash`, and related types out of `bevy_utils`
and into `bevy_platform_support`
- Refactored the above to match the layout of these types in `std`.
- Updated crates as required.
## Testing
- CI
---
## Migration Guide
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::hash`:
- `FixedState`
- `DefaultHasher`
- `RandomState`
- `FixedHasher`
- `Hashed`
- `PassHash`
- `PassHasher`
- `NoOpHash`
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::collections`:
- `HashMap`
- `HashSet`
- `bevy_utils::hashbrown` has been removed. Instead, import from
`bevy_platform_support::collections` _or_ take a dependency on
`hashbrown` directly.
- `bevy_utils::Entry` has been removed. Instead, import from
`bevy_platform_support::collections::hash_map` or
`bevy_platform_support::collections::hash_set` as appropriate.
- All of the above equally apply to `bevy::utils` and
`bevy::platform_support`.
## Notes
- I left `PreHashMap`, `PreHashMapExt`, and `TypeIdMap` in `bevy_utils`
as they might be candidates for micro-crating. They can always be moved
into `bevy_platform_support` at a later date if desired.
# Objective
- Contributes to #16877
## Solution
- Initial creation of `bevy_platform_support` crate.
- Moved `bevy_utils::Instant` into new `bevy_platform_support` crate.
- Moved `portable-atomic`, `portable-atomic-util`, and
`critical-section` into new `bevy_platform_support` crate.
## Testing
- CI
---
## Showcase
Instead of needing code like this to import an `Arc`:
```rust
#[cfg(feature = "portable-atomic")]
use portable_atomic_util::Arc;
#[cfg(not(feature = "portable-atomic"))]
use alloc::sync::Arc;
```
We can now use:
```rust
use bevy_platform_support::sync::Arc;
```
This applies to many other types, but the goal is overall the same:
allowing crates to use `std`-like types without the boilerplate of
conditional compilation and platform-dependencies.
## Migration Guide
- Replace imports of `bevy_utils::Instant` with
`bevy_platform_support::time::Instant`
- Replace imports of `bevy::utils::Instant` with
`bevy::platform_support::time::Instant`
## Notes
- `bevy_platform_support` hasn't been reserved on `crates.io`
- ~~`bevy_platform_support` is not re-exported from `bevy` at this time.
It may be worthwhile exporting this crate, but I am unsure of a
reasonable name to export it under (`platform_support` may be a bit
wordy for user-facing).~~
- I've included an implementation of `Instant` which is suitable for
`no_std` platforms that are not Wasm for the sake of eliminating feature
gates around its use. It may be a controversial inclusion, so I'm happy
to remove it if required.
- There are many other items (`spin`, `bevy_utils::Sync(Unsafe)Cell`,
etc.) which should be added to this crate. I have kept the initial scope
small to demonstrate utility without making this too unwieldy.
---------
Co-authored-by: TimJentzsch <TimJentzsch@users.noreply.github.com>
Co-authored-by: Chris Russell <8494645+chescock@users.noreply.github.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
Fixes https://github.com/bevyengine/bevy/issues/17111
## Solution
Move `#![warn(clippy::allow_attributes,
clippy::allow_attributes_without_reason)]` to the workspace `Cargo.toml`
## Testing
Lots of CI testing, and local testing too.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
I realized that setting these to `deny` may have been a little
aggressive - especially since we upgrade warnings to denies in CI.
## Solution
Downgrades these lints to `warn`, so that compiles can work locally. CI
will still treat these as denies.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_utils` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_utils` was run, and
no errors were encountered.
# Objective
Stumbled upon a `from <-> form` transposition while reviewing a PR,
thought it was interesting, and went down a bit of a rabbit hole.
## Solution
Fix em
# Objective
- Shrink `bevy_utils` more.
- Refs #11478
## Solution
- Removes `assert_object_safe` from `bevy_utils` by using a compile time
check instead.
## Testing
- CI.
---
## Migration Guide
`assert_object_safe` is no longer exported by `bevy_utils`. Instead, you
can write a compile time check that your trait is "dyn compatible":
```rust
/// Assert MyTrait is dyn compatible
const _: Option<Box<dyn MyTrait>> = None;
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Contributes to #11478
## Solution
- Made `bevy_utils::tracing` `doc(hidden)`
- Re-exported `tracing` from `bevy_log` for end-users
- Added `tracing` directly to crates that need it.
## Testing
- CI
---
## Migration Guide
If you were importing `tracing` via `bevy::utils::tracing`, instead use
`bevy::log::tracing`. Note that many items within `tracing` are also
directly re-exported from `bevy::log` as well, so you may only need
`bevy::log` for the most common items (e.g., `warn!`, `trace!`, etc.).
This also applies to the `log_once!` family of macros.
## Notes
- While this doesn't reduce the line-count in `bevy_utils`, it further
decouples the internal crates from `bevy_utils`, making its eventual
removal more feasible in the future.
- I have just imported `tracing` as we do for all dependencies. However,
a workspace dependency may be more appropriate for version management.
# Objective
- Contributes to #11478
- Contributes to #16877
## Solution
- Removed everything except `Instant` from `bevy_utils::time`
## Testing
- CI
---
## Migration Guide
If you relied on any of the following from `bevy_utils::time`:
- `Duration`
- `TryFromFloatSecsError`
Import these directly from `core::time` regardless of platform target
(WASM, mobile, etc.)
If you relied on any of the following from `bevy_utils::time`:
- `SystemTime`
- `SystemTimeError`
Instead import these directly from either `std::time` or `web_time` as
appropriate for your target platform.
## Notes
`Duration` and `TryFromFloatSecsError` are both re-exports from
`core::time` regardless of whether they are used from `web_time` or
`std::time`, so there is no value gained from re-exporting them from
`bevy_utils::time` as well. As for `SystemTime` and `SystemTimeError`,
no Bevy internal crates or examples rely on these types. Since Bevy
doesn't have a `Time<Wall>` resource for interacting with wall-time (and
likely shouldn't need one), I think removing these from `bevy_utils`
entirely and waiting for a use-case to justify inclusion is a reasonable
path forward.
# Background
In `no_std` compatible crates, there is often an `std` feature which
will allow access to the standard library. Currently, with the `std`
feature _enabled_, the
[`std::prelude`](https://doc.rust-lang.org/std/prelude/index.html) is
implicitly imported in all modules. With the feature _disabled_, instead
the [`core::prelude`](https://doc.rust-lang.org/core/prelude/index.html)
is implicitly imported. This creates a subtle and pervasive issue where
`alloc` items _may_ be implicitly included (if `std` is enabled), or
must be explicitly included (if `std` is not enabled).
# Objective
- Make the implicit imports for `no_std` crates consistent regardless of
what features are/not enabled.
## Solution
- Replace the `cfg_attr` "double negative" `no_std` attribute with
conditional compilation to _include_ `std` as an external crate.
```rust
// Before
#![cfg_attr(not(feature = "std"), no_std)]
// After
#![no_std]
#[cfg(feature = "std")]
extern crate std;
```
- Fix imports that are currently broken but are only now visible with
the above fix.
## Testing
- CI
## Notes
I had previously used the "double negative" version of `no_std` based on
general consensus that it was "cleaner" within the Rust embedded
community. However, this implicit prelude issue likely was considered
when forming this consensus. I believe the reason why is the items most
affected by this issue are provided by the `alloc` crate, which is
rarely used within embedded but extensively used within Bevy.
# Objective
- Improves platform compatibility for `bevy_utils`
## Solution
- Added `portable-atomic` to allow using the `once!` macro on more
platforms (e.g., Raspberry Pi Pico)
## Testing
- CI
## Notes
- This change should be entirely hidden thanks to the use of
`doc(hidden)`. Enabling the new `portable-atomic` feature just allows
using the `once!` macro on platforms which previously could not.
- I took the liberty of updating the feature documentation to be more in
line with how I've documented features in `bevy_ecs`/`bevy_app`/etc. for
their `no_std` updates.
# Objective
- Related to https://github.com/bevyengine/bevy/issues/11478
## Solution
- Moved `futures.rs`, `ConditionalSend` `ConditionalSendFuture` and
`BoxedFuture` from `bevy_utils` to `bevy_tasks`.
## Testing
- CI checks
## Migration Guide
- Several modules were moved from `bevy_utils` into `bevy_tasks`:
- Replace `bevy_utils::futures` imports with `bevy_tasks::futures`.
- Replace `bevy_utils::ConditionalSend` with
`bevy_tasks::ConditionalSend`.
- Replace `bevy_utils::ConditionalSendFuture` with
`bevy_tasks::ConditionalSendFuture`.
- Replace `bevy_utils::BoxedFuture` with `bevy_tasks::BoxedFuture`.
# Objective
Fixes#16104
## Solution
I removed all instances of `:?` and put them back one by one where it
caused an error.
I removed some bevy_utils helper functions that were only used in 2
places and don't add value. See: #11478
## Testing
CI should catch the mistakes
## Migration Guide
`bevy::utils::{dbg,info,warn,error}` were removed. Use
`bevy::utils::tracing::{debug,info,warn,error}` instead.
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
# Objective
- Contributes to #15460
## Solution
- Added the following features:
- `std` (default)
- `async_executor` (default)
- `edge_executor`
- `critical-section`
- `portable-atomic`
- Gated `tracing` in `bevy_utils` to allow compilation on certain
platforms
- Switched from `tracing` to `log` for simple message logging within
`bevy_ecs`. Note that `tracing` supports capturing from `log` so this
should be an uncontroversial change.
- Fixed imports and added feature gates as required
- Made `bevy_tasks` optional within `bevy_ecs`. Turns out it's only
needed for parallel operations which are already gated behind
`multi_threaded` anyway.
## Testing
- Added to `compile-check-no-std` CI command
- `cargo check -p bevy_ecs --no-default-features --features
edge_executor,critical-section,portable-atomic --target
thumbv6m-none-eabi`
- `cargo check -p bevy_ecs --no-default-features --features
edge_executor,critical-section`
- `cargo check -p bevy_ecs --no-default-features`
## Draft Release Notes
Bevy's core ECS now supports `no_std` platforms.
In prior versions of Bevy, it was not possible to work with embedded or
niche platforms due to our reliance on the standard library, `std`. This
has blocked a number of novel use-cases for Bevy, such as an embedded
database for IoT devices, or for creating games on retro consoles.
With this release, `bevy_ecs` no longer requires `std`. To use Bevy on a
`no_std` platform, you must disable default features and enable the new
`edge_executor` and `critical-section` features. You may also need to
enable `portable-atomic` and `critical-section` if your platform does
not natively support all atomic types and operations used by Bevy.
```toml
[dependencies]
bevy_ecs = { version = "0.16", default-features = false, features = [
# Required for platforms with incomplete atomics (e.g., Raspberry Pi Pico)
"portable-atomic",
"critical-section",
# Optional
"bevy_reflect",
"serialize",
"bevy_debug_stepping",
"edge_executor"
] }
```
Currently, this has been tested on bare-metal x86 and the Raspberry Pi
Pico. If you have trouble using `bevy_ecs` on a particular platform,
please reach out either through a GitHub issue or in the `no_std`
working group on the Bevy Discord server.
Keep an eye out for future `no_std` updates as we continue to improve
the parity between `std` and `no_std`. We look forward to seeing what
kinds of applications are now possible with Bevy!
## Notes
- Creating PR in draft to ensure CI is passing before requesting
reviews.
- This implementation has no support for multithreading in `no_std`,
especially due to `NonSend` being unsound if allowed in multithreading.
The reason is we cannot check the `ThreadId` in `no_std`, so we have no
mechanism to at-runtime determine if access is sound.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Vic <59878206+Victoronz@users.noreply.github.com>
Updating dependencies; adopted version of #15696. (Supercedes #15696.)
Long answer: hashbrown is no longer using ahash by default, meaning that
we can't use the default-hasher methods with ahasher. So, we have to use
the longer-winded versions instead. This takes the opportunity to also
switch our default hasher as well, but without actually enabling the
default-hasher feature for hashbrown, meaning that we'll be able to
change our hasher more easily at the cost of all of these method calls
being obnoxious forever.
One large change from 0.15 is that `insert_unique_unchecked` is now
`unsafe`, and for cases where unsafe code was denied at the crate level,
I replaced it with `insert`.
## Migration Guide
`bevy_utils` has updated its version of `hashbrown` to 0.15 and now
defaults to `foldhash` instead of `ahash`. This means that if you've
hard-coded your hasher to `bevy_utils::AHasher` or separately used the
`ahash` crate in your code, you may need to switch to `foldhash` to
ensure that everything works like it does in Bevy.
# Objective
Fixes#15941
## Solution
Created https://crates.io/crates/variadics_please and moved the code
there; updating references
`bevy_utils/macros` is deleted.
## Testing
cargo check
## Migration Guide
Use `variadics_please::{all_tuples, all_tuples_with_size}` instead of
`bevy::utils::{all_tuples, all_tuples_with_size}`.
# Objective
Animating component fields requires too much boilerplate at the moment:
```rust
#[derive(Reflect)]
struct FontSizeProperty;
impl AnimatableProperty for FontSizeProperty {
type Component = TextFont;
type Property = f32;
fn get_mut(component: &mut Self::Component) -> Option<&mut Self::Property> {
Some(&mut component.font_size)
}
}
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableKeyframeCurve::new(
[0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0]
.into_iter()
.zip([24.0, 80.0, 24.0, 80.0, 24.0, 80.0, 24.0]),
)
.map(AnimatableCurve::<FontSizeProperty, _>::from_curve)
.expect("should be able to build translation curve because we pass in valid samples"),
);
```
## Solution
This adds `AnimatedField` and an `animated_field!` macro, enabling the
following:
```rust
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableCurve::new(
animated_field!(TextFont::font_size),
AnimatableKeyframeCurve::new(
[0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0]
.into_iter()
.zip([24.0, 80.0, 24.0, 80.0, 24.0, 80.0, 24.0]),
)
.expect(
"should be able to build translation curve because we pass in valid samples",
),
),
);
```
This required reworking the internals a bit, namely stripping out a lot
of the `Reflect` usage, as that implementation was fundamentally
incompatible with the `AnimatedField` pattern. `Reflect` was being used
in this context just to downcast traits. But we can get downcasting
behavior without the `Reflect` requirement by implementing `Downcast`
for `AnimationCurveEvaluator`.
This also reworks "evaluator identity" to support either a (Component /
Field) pair, or a TypeId. This allows properties to reuse evaluators,
even if they have different accessor methods. The "contract" here is
that for a given (Component / Field) pair, the accessor will return the
same value. Fields are identified by their Reflect-ed field index. The
(TypeId, usize) is prehashed and cached to optimize for lookup speed.
This removes the built-in hard-coded TranslationCurve / RotationCurve /
ScaleCurve in favor of AnimatableField.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Alternative to #16450
# Objective
detailed_trace! in its current form does not work (and breaks CI)
## Solution
Fix detailed_trace by checking for the feature properly, adding it to
the correct crates, and removing it from the incorrect crates
# Objective
- Contributes to #15460
## Solution
- Made `web-time` a `wasm32`-only dependency.
- Moved time-related exports to its own module for clarity.
- Feature-gated allocator requirements for `hashbrown` behind `alloc`.
- Enabled compile-time RNG for `ahash` (runtime RNG will preferentially
used in `std` environments)
- Made `thread_local` optional by feature-gating the `Parallel` type.
## Testing
- Ran CI locally.
- `cargo build -p bevy_utils --target "x86_64-unknown-none"
--no-default-features`
# Objective
- Fixes#6370
- Closes#6581
## Solution
- Added the following lints to the workspace:
- `std_instead_of_core`
- `std_instead_of_alloc`
- `alloc_instead_of_core`
- Used `cargo +nightly fmt` with [item level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Item%5C%3A)
to split all `use` statements into single items.
- Used `cargo clippy --workspace --all-targets --all-features --fix
--allow-dirty` to _attempt_ to resolve the new linting issues, and
intervened where the lint was unable to resolve the issue automatically
(usually due to needing an `extern crate alloc;` statement in a crate
root).
- Manually removed certain uses of `std` where negative feature gating
prevented `--all-features` from finding the offending uses.
- Used `cargo +nightly fmt` with [crate level use
formatting](https://rust-lang.github.io/rustfmt/?version=v1.6.0&search=#Crate%5C%3A)
to re-merge all `use` statements matching Bevy's previous styling.
- Manually fixed cases where the `fmt` tool could not re-merge `use`
statements due to conditional compilation attributes.
## Testing
- Ran CI locally
## Migration Guide
The MSRV is now 1.81. Please update to this version or higher.
## Notes
- This is a _massive_ change to try and push through, which is why I've
outlined the semi-automatic steps I used to create this PR, in case this
fails and someone else tries again in the future.
- Making this change has no impact on user code, but does mean Bevy
contributors will be warned to use `core` and `alloc` instead of `std`
where possible.
- This lint is a critical first step towards investigating `no_std`
options for Bevy.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- Goal is to minimize bevy_utils #11478
## Solution
- Move the file short_name wholesale into bevy_reflect
## Testing
- Unit tests
- CI
## Migration Guide
- References to `bevy_utils::ShortName` should instead now be
`bevy_reflect::ShortName`.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
> Rust 1.81 released the #[expect(...)] attribute, which works like
#[allow(...)] but throws a warning if the lint isn't raised. This is
preferred to #[allow(...)] because it tells us when it can be removed.
- Adopts the parts of #15118 that are complete, and updates the branch
so it can be merged.
- There were a few conflicts, let me know if I misjudged any of 'em.
Alice's
[recommendation](https://github.com/bevyengine/bevy/issues/15059#issuecomment-2349263900)
seems well-taken, let's do this crate by crate now that @BD103 has done
the lion's share of this!
(Relates to, but doesn't yet completely finish #15059.)
Crates this _doesn't_ cover:
- bevy_input
- bevy_gilrs
- bevy_window
- bevy_winit
- bevy_state
- bevy_render
- bevy_picking
- bevy_core_pipeline
- bevy_sprite
- bevy_text
- bevy_pbr
- bevy_ui
- bevy_gltf
- bevy_gizmos
- bevy_dev_tools
- bevy_internal
- bevy_dylib
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Ben Frankel <ben.frankel7@gmail.com>
Co-authored-by: Antony <antony.m.3012@gmail.com>
`ShortName` is lazily evaluated and does not allocate, instead providing
`Display` and `Debug` implementations which write directly to a
formatter using the original algorithm. When using `ShortName` in format
strings (`panic`, `dbg`, `format`, etc.) you can directly use the
`ShortName` type. If you require a `String`, simply call
`ShortName(...).to_string()`.
# Objective
- Remove the requirement for allocation when using `get_short_name`
## Solution
- Added new type `ShortName` which wraps a name and provides its own
`Debug` and `Display` implementations, using the original
`get_short_name` algorithm without the need for allocating.
- Removed `get_short_name`, as `ShortName(...)` is more performant and
ergonomic.
- Added `ShortName::of::<T>` method to streamline the common use-case
for name shortening.
## Testing
- CI
## Migration Guide
### For `format!`, `dbg!`, `panic!`, etc.
```rust
// Before
panic!("{} is too short!", get_short_name(name));
// After
panic!("{} is too short!", ShortName(name));
```
### Need a `String` Value
```rust
// Before
let short: String = get_short_name(name);
// After
let short: String = ShortName(name).to_string();
```
## Notes
`ShortName` lazily evaluates, and directly writes to a formatter via
`Debug` and `Display`, which removes the need to allocate a `String`
when printing a shortened type name. Because the implementation has been
moved into the `fmt` method, repeated printing of the `ShortName` type
may be less performant than converting it into a `String`. However, no
instances of this are present in Bevy, and the user can get the original
behaviour by calling `.to_string()` at no extra cost.
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Adjust `bevy_utils` to make it `no_std` compatible
- Partially replaces #6581
- Contributes to #8161
- Contributes to #6370
## Solution
Added `alloc` and `std` features to `bevy_utils` (`std` is enabled by
default), allowing the crate's use in `no_std` contexts.
## Testing
- CI passed locally.
- Used `bevy_utils` in a `no_std` crate as an experiment and compiled
successfully.
## Migration Guide
If you were importing `bevy_utils` and setting `default_features` to
`false`, but relying on elements which are now gated behind the `std` or
`alloc` features, include the relevant feature in your `Cargo.toml`.
## Notes
- Bevy already includes a single `no_std` crate, `bevy_ptr`, so there is
precedent for this change.
- As `bevy_utils` is widely used across the rest of Bevy, further work
to make Bevy `no_std` compatible would be blocked on this crate, if such
work was to be undertaken.
- Most of the changes in this PR are just the removal of an unnecessary
call to `to_string()` within unit tests.
Enabled `check-private-items` in `clippy.toml` and then fixed the
resulting errors. Most of these were simply misformatted and of the
remaining:
- ~Added `#[allow(clippy::missing_safety_doc)]` to~ Removed unsafe from
a pair of functions in `bevy_utils/futures` which are only unsafe so
that they can be passed to a function which requires `unsafe fn`
- Removed `unsafe` from `UnsafeWorldCell::observers` as from what I can
tell it is always safe like `components`, `bundles` etc. (this should be
checked)
- Added safety docs to:
- `Bundles::get_storage_unchecked`: Based on the function that writes to
`dynamic_component_storages`
- `Bundles::get_storages_unchecked`: Based on the function that writes
to `dynamic_bundle_storages`
- `QueryIterationCursor::init_empty`: Duplicated from `init`
- `QueryIterationCursor::peek_last`: Thanks Giooschi (also added
internal unsafe blocks)
- `tests::drop_ptr`: Moved safety comment out to the doc string
This lint would also apply to `missing_errors_doc`, `missing_panics_doc`
and `unnecessary_safety_doc` if we chose to enable any of those at some
point, although there is an open
[issue](https://github.com/rust-lang/rust-clippy/issues/13074) to
separate these options.
# Objective
`EntityHash` and related types were moved from `bevy_utils` to
`bevy_ecs` in #11498, but seemed to have been accidentally reintroduced
a week later in #11707.
## Solution
Remove the old leftover code.
---
## Migration Guide
- Uses of `bevy::utils::{EntityHash, EntityHasher, EntityHashMap,
EntityHashSet}` now have to be imported from `bevy::ecs::entity`.
# Objective
- Crate-level prelude modules, such as `bevy_ecs::prelude`, are plagued
with inconsistency! Let's fix it!
## Solution
Format all preludes based on the following rules:
1. All preludes should have brief documentation in the format of:
> The _name_ prelude.
>
> This includes the most common types in this crate, re-exported for
your convenience.
2. All documentation should be outer, not inner. (`///` instead of
`//!`.)
3. No prelude modules should be annotated with `#[doc(hidden)]`. (Items
within them may, though I'm not sure why this was done.)
## Testing
- I manually searched for the term `mod prelude` and updated all
occurrences by hand. 🫠
---------
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/14975
## Solution
- Replace usages of `bevy_utils::CowArc` with `atomicow::CowArc`
- Remove bevy_utils::CowArc
## Testing
- `bevy_asset` test suite continues to pass.
---
## Migration Guide
`bevy_utils::CowArc` has moved to a new crate called
[atomicow](https://crates.io/crates/atomicow).
# Objective
Fixes#14782
## Solution
Enable the lint and fix all upcoming hints (`--fix`). Also tried to
figure out the false-positive (see review comment). Maybe split this PR
up into multiple parts where only the last one enables the lint, so some
can already be merged resulting in less many files touched / less
potential for merge conflicts?
Currently, there are some cases where it might be easier to read the
code with the qualifier, so perhaps remove the import of it and adapt
its cases? In the current stage it's just a plain adoption of the
suggestions in order to have a base to discuss.
## Testing
`cargo clippy` and `cargo run -p ci` are happy.
# Objective
- Fixes#10478
## Solution
Generalised `From/Into` implementations over `&str` and `Option<&str>`
for `AssetSourceId` and `AssetPath` across all lifetimes, not just
static. To maintain access to the `'static`-only specialisation, these
types (and `CowArc`) now include an `as_static` method which will apply
the specialisation.
```rust
// Snipped from `AssetApp`
fn register_asset_source(
&mut self,
id: impl Into<AssetSourceId<'static>>,
// ^^^^^^^
// | as_static is only available for 'static lifetimes
source: AssetSourceBuilder,
) -> &mut Self {
let id = id.into().as_static();
// ^^^^^^ ^^^^^^^^^
// | | Specialized (internally storing CowArc::Static)
// | Generic Into (internally storing CowArc::Borrowed)
// ...
}
```
This post-fix specialisation is available here because the actual
specialisation performed is only a marker for if/when modification or
ownership is required, making the transform a very cheap operation. For
cleanliness, I've also added `from_static`, which wraps this behaviour
in a clean shorthand designed to replace `from` calls.
---
## Changelog
- Generalised the following implementations over a generic lifetime:
- `From<&'static str> for AssetSourceId<'static>`
- `From<Option<&'static str>> for AssetSourceId<'static>`
- `From<&'static str> for AssetPath<'static>`
- `From<&'static Path> for AssetPath<'static>`
- Added `as_static` specialisation to:
- `CowArc`
- `AssetSourceId`
- `AssetPath`
- Added `from_static` specialised constructor to:
- `AssetSourceId`
- `AssetPath`
## Migration Guide
In areas where these implementations where being used, you can now add
`from_static` in order to get the original specialised implementation
which avoids creating an `Arc` internally.
```rust
// Before
let asset_path = AssetPath::from("my/path/to/an/asset.ext");
// After
let asset_path = AssetPath::from_static("my/path/to/an/asset.ext");
```
To be clear, this is only required if you wish to maintain the
performance benefit that came with the specialisation. Existing code is
_not_ broken by this change.
# Objective
- `Parallel::drain()` has an unused type parameter `B` than can be
removed.
- Caught [on
Discord](https://discord.com/channels/691052431525675048/692572690833473578/1259004180560085003)
by Andrew, thanks!
## Solution
- Remove it! :)
## Testing
- `Parallel::drain()` should still function exactly the same.
---
## Changelog
- Removed unused type parameter in `Parallel::drain()`.
## Migration Guide
The type parameter of `Parallel::drain()` was unused, so it is now
removed. If you were manually specifying it, you can remove the bounds.
```rust
// 0.14
// Create a `Parallel` and give it a value.
let mut parallel: Parallel<Vec<u8>> = Parallel::default();
*parallel.borrow_local_mut() = vec![1, 2, 3];
for v in parallel.drain::<u8>() {
// ...
}
// 0.15
let mut parallel: Parallel<Vec<u8>> = Parallel::default();
*parallel.borrow_local_mut() = vec![1, 2, 3];
// Remove the type parameter.
for v in parallel.drain() {
// ...
}
```
