Unfortunately, Apple platforms don't have enough texture bindings to
properly support clustered decals. This should be fixed once `wgpu` has
first-class bindless texture support. In the meantime, we disable them.
Closes#17553.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
*Occlusion culling* allows the GPU to skip the vertex and fragment
shading overhead for objects that can be quickly proved to be invisible
because they're behind other geometry. A depth prepass already
eliminates most fragment shading overhead for occluded objects, but the
vertex shading overhead, as well as the cost of testing and rejecting
fragments against the Z-buffer, is presently unavoidable for standard
meshes. We currently perform occlusion culling only for meshlets. But
other meshes, such as skinned meshes, can benefit from occlusion culling
too in order to avoid the transform and skinning overhead for unseen
meshes.
This commit adapts the same [*two-phase occlusion culling*] technique
that meshlets use to Bevy's standard 3D mesh pipeline when the new
`OcclusionCulling` component, as well as the `DepthPrepass` component,
are present on the camera. It has these steps:
1. *Early depth prepass*: We use the hierarchical Z-buffer from the
previous frame to cull meshes for the initial depth prepass, effectively
rendering only the meshes that were visible in the last frame.
2. *Early depth downsample*: We downsample the depth buffer to create
another hierarchical Z-buffer, this time with the current view
transform.
3. *Late depth prepass*: We use the new hierarchical Z-buffer to test
all meshes that weren't rendered in the early depth prepass. Any meshes
that pass this check are rendered.
4. *Late depth downsample*: Again, we downsample the depth buffer to
create a hierarchical Z-buffer in preparation for the early depth
prepass of the next frame. This step is done after all the rendering, in
order to account for custom phase items that might write to the depth
buffer.
Note that this patch has no effect on the per-mesh CPU overhead for
occluded objects, which remains high for a GPU-driven renderer due to
the lack of `cold-specialization` and retained bins. If
`cold-specialization` and retained bins weren't on the horizon, then a
more traditional approach like potentially visible sets (PVS) or low-res
CPU rendering would probably be more efficient than the GPU-driven
approach that this patch implements for most scenes. However, at this
point the amount of effort required to implement a PVS baking tool or a
low-res CPU renderer would probably be greater than landing
`cold-specialization` and retained bins, and the GPU driven approach is
the more modern one anyway. It does mean that the performance
improvements from occlusion culling as implemented in this patch *today*
are likely to be limited, because of the high CPU overhead for occluded
meshes.
Note also that this patch currently doesn't implement occlusion culling
for 2D objects or shadow maps. Those can be addressed in a follow-up.
Additionally, note that the techniques in this patch require compute
shaders, which excludes support for WebGL 2.
This PR is marked experimental because of known precision issues with
the downsampling approach when applied to non-power-of-two framebuffer
sizes (i.e. most of them). These precision issues can, in rare cases,
cause objects to be judged occluded that in fact are not. (I've never
seen this in practice, but I know it's possible; it tends to be likelier
to happen with small meshes.) As a follow-up to this patch, we desire to
switch to the [SPD-based hi-Z buffer shader from the Granite engine],
which doesn't suffer from these problems, at which point we should be
able to graduate this feature from experimental status. I opted not to
include that rewrite in this patch for two reasons: (1) @JMS55 is
planning on doing the rewrite to coincide with the new availability of
image atomic operations in Naga; (2) to reduce the scope of this patch.
A new example, `occlusion_culling`, has been added. It demonstrates
objects becoming quickly occluded and disoccluded by dynamic geometry
and shows the number of objects that are actually being rendered. Also,
a new `--occlusion-culling` switch has been added to `scene_viewer`, in
order to make it easy to test this patch with large scenes like Bistro.
[*two-phase occlusion culling*]:
https://medium.com/@mil_kru/two-pass-occlusion-culling-4100edcad501
[Aaltonen SIGGRAPH 2015]:
https://www.advances.realtimerendering.com/s2015/aaltonenhaar_siggraph2015_combined_final_footer_220dpi.pdf
[Some literature]:
https://gist.github.com/reduz/c5769d0e705d8ab7ac187d63be0099b5?permalink_comment_id=5040452#gistcomment-5040452
[SPD-based hi-Z buffer shader from the Granite engine]:
https://github.com/Themaister/Granite/blob/master/assets/shaders/post/hiz.comp
## Migration guide
* When enqueuing a custom mesh pipeline, work item buffers are now
created with
`bevy::render::batching::gpu_preprocessing::get_or_create_work_item_buffer`,
not `PreprocessWorkItemBuffers::new`. See the
`specialized_mesh_pipeline` example.
## Showcase
Occlusion culling example:
Bistro zoomed out, before occlusion culling:
Bistro zoomed out, after occlusion culling:
In this scene, occlusion culling reduces the number of meshes Bevy has
to render from 1591 to 585.
Currently, our default maximum shadow cascade distance is 1000 m, which
is quite distant compared to that of Unity (150 m), Unreal Engine 5 (200
m), and Godot (100 m). I also adjusted the default first cascade far
bound to be 10 m, which matches that of Unity (10.05 m) and Godot (10
m). Together, these changes should improve the default sharpness of
shadows of directional lights for typical scenes.
## Migration Guide
* The default shadow cascade far distance has been changed from 1000 to
150, and the default first cascade far bound has been changed from 5 to
10, in order to be similar to the defaults of other engines.
# Objective
This allows for the usage of the MouseScrollUnit as a key to a HashSet
and HashMap. I have a need for this, but this basic functionality is
currently missing.
## Solution
Add the derive Hash attribute to the MouseScrollUnit type.
## Testing
- Did you test these changes? If so, how?
No, but I did perform a `cargo build`. My laptop is failing to run
`cargo test` without crashing.
- Are there any parts that need more testing?
If someone could run a `cargo test` for completeness, that would be
great but this is a trivial change.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
They simply need to ensure that the common Hash derive macro works as
expected for the basic MouseScrollUnit type.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Ubuntu 22.04
# Objective
Implement `Eq` and `Hash` for the `BindGroup` and `BindGroupLayout`
wrappers.
## Solution
Implement based on the same assumption that the ID is unique, for
consistency with `PartialEq`.
## Testing
None; this should be straightforward. If there's an issue that would be
a design one.
This commit allows specular highlights to be tinted with a color and for
the reflectance and color tint values to vary across a model via a pair
of maps. The implementation follows the [`KHR_materials_specular`] glTF
extension. In order to reduce the number of samplers and textures in the
default `StandardMaterial` configuration, the maps are gated behind the
`pbr_specular_textures` Cargo feature.
Specular tinting is currently unsupported in the deferred renderer,
because I didn't want to bloat the deferred G-buffers. A possible fix
for this in the future would be to make the G-buffer layout more
configurable, so that specular tints could be supported on an opt-in
basis. As an alternative, Bevy could force meshes with specular tints to
render in forward mode. Both of these solutions require some more
design, so I consider them out of scope for now.
Note that the map is a *specular* map, not a *reflectance* map. In Bevy
and Filament terms, the reflectance values in the specular map range
from [0.0, 0.5], rather than [0.0, 1.0]. This is an unfortunate
[`KHR_materials_specular`] specification requirement that stems from the
fact that glTF is specified in terms of a specular strength model, not
the reflectance model that Filament and Bevy use. A workaround, which is
noted in the `StandardMaterial` documentation, is to set the
`reflectance` value to 2.0, which spreads the specular map range from
[0.0, 1.0] as normal.
The glTF loader has been updated to parse the [`KHR_materials_specular`]
extension. Note that, unless the non-default `pbr_specular_textures` is
supplied, the maps are ignored. The `specularFactor` value is applied as
usual. Note that, as with the specular map, the glTF `specularFactor` is
twice Bevy's `reflectance` value.
This PR adds a new example, `specular_tint`, which demonstrates the
specular tint and map features. Note that this example requires the
[`KHR_materials_specular`] Cargo feature.
[`KHR_materials_specular`]:
https://github.com/KhronosGroup/glTF/tree/main/extensions/2.0/Khronos/KHR_materials_specular
## Changelog
### Added
* Specular highlights can now be tinted with the `specular_tint` field
in `StandardMaterial`.
* Specular maps are now available in `StandardMaterial`, gated behind
the `pbr_specular_textures` Cargo feature.
* The `KHR_materials_specular` glTF extension is now supported, allowing
for customization of specular reflectance and specular maps. Note that
the latter are gated behind the `pbr_specular_textures` Cargo feature.
This commit adds support for *decal projectors* to Bevy, allowing for
textures to be projected on top of geometry. Decal projectors are
clusterable objects, just as punctual lights and light probes are. This
means that decals are only evaluated for objects within the conservative
bounds of the projector, and they don't require a second pass.
These clustered decals require support for bindless textures and as such
currently don't work on WebGL 2, WebGPU, macOS, or iOS. For an
alternative that doesn't require bindless, see PR #16600. I believe that
both contact projective decals in #16600 and clustered decals are
desirable to have in Bevy. Contact projective decals offer broader
hardware and driver support, while clustered decals don't require the
creation of bounding geometry.
A new example, `decal_projectors`, has been added, which demonstrates
multiple decals on a rotating object. The decal projectors can be scaled
and rotated with the mouse.
There are several limitations of this initial patch that can be
addressed in follow-ups:
1. There's no way to specify the Z-index of decals. That is, the order
in which multiple decals are blended on top of one another is arbitrary.
A follow-up could introduce some sort of Z-index field so that artists
can specify that some decals should be blended on top of others.
2. Decals don't take the normal of the surface they're projected onto
into account. Most decal implementations in other engines have a feature
whereby the angle between the decal projector and the normal of the
surface must be within some threshold for the decal to appear. Often,
artists can specify a fade-off range for a smooth transition between
oblique surfaces and aligned surfaces.
3. There's no distance-based fadeoff toward the end of the projector
range. Many decal implementations have this.
This addresses #2401.
## Showcase
# Objective
Bevy sprite image mode lacks proportional scaling for the underlying
texture. In many cases, it's required. For example, if it is desired to
support a wide variety of screens with a single texture, it's okay to
cut off some portion of the original texture.
## Solution
I added scaling of the texture during the preparation step. To fill the
sprite with the original texture, I scaled UV coordinates accordingly to
the sprite size aspect ratio and texture size aspect ratio. To fit
texture in a sprite the original `quad` is scaled and then the
additional translation is applied to place the scaled quad properly.
## Testing
For testing purposes could be used `2d/sprite_scale.rs`. Also, I am
thinking that it would be nice to have some tests for a
`crates/bevy_sprite/src/render/mod.rs:sprite_scale`.
---
## Showcase
<img width="1392" alt="image"
src="https://github.com/user-attachments/assets/c2c37b96-2493-4717-825f-7810d921b4bc"
/>
# Objective
We do not have `EntityIndexMap`/`EntityIndexSet`.
Usual `HashMap`s/`HashSet`s do not guarantee any order, which can be
awkward for some use cases.
The `indexmap` versions remember insertion order, which then also
becomes their iteration order.
They can be thought of as a `HashTable` + `Vec`, which means fast
iteration and removal, indexing by index (not just key), and slicing!
Performance should otherwise be comparable.
## Solution
Because `indexmap` is structured to mirror `hashbrown`, it suffers the
same issue of not having the `Hasher` generic on their iterators. #16912
solved this issue for `EntityHashMap`/`EntityHashSet` with a wrapper
around the hashbrown version, so this PR does the same.
Hopefully these wrappers can be removed again in the future by having
`hashbrown`/`indexmap` adopt that generic in their iterators themselves!
# Objective
Fixes#17487
- Adds a new field `refresh_interval` to `FpsOverlayConfig` to allow the
user setting a minimum time before each refresh of the FPS display
## Solution
- Add `refresh_interval` to `FpsOverlayConfig`
- When updating the on screen text, check a duration of
`refresh_interval` has passed, if not, don't update the FPS counter
## Testing
- Created a new bevy project
- Included the `FpsOverlayPlugin` with the default `refresh_interval`
(100 ms)
- Included the `FpsOverlayPlugin` with an obnoxious `refresh_interval`
(2 seconds)
---
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- This PR adds a new stress test called `many_materials` to benchmark
the rendering performance of many animated materials.
- Fixes#11588
- This PR continues the work started in the previous PR #11592, which
was closed due to inactivity.
## Solution
- Created a new example (`examples/stress_tests/many_materials.rs`) that
renders a grid of cubes with animated materials.
- The size of the grid can be configured using the `-n` command-line
argument (or `--grid-size`). The default grid size is 10x10.
- The materials animate by cycling through colors in the HSL color
space.
## Testing
- I have tested these changes locally on my Linux machine.
- Reviewers can test the changes by running the example with different
grid sizes and observing the performance (FPS, frame time).
- I have not tested on other platforms (macOS, Windows, wasm), but I
expect it to work as the code uses standard Bevy features.
---
## Showcase
<details>
<summary>Click to view showcase</summary>
</details>
# Objective
- Trouble remembering the difference between `OnAdd` and `OnInsert` for
triggers. Would like a better doc for those triggers so it appears in my
editor tooltip.
## Solution
- Clarify docs for OnAdd, OnInsert, OnRemove, OnReplace. Based on
comments in the
[component_hook.rs](https://github.com/bevyengine/bevy/blob/main/examples/ecs/component_hooks.rs#L73)
example.
## Testing
- None, small doc fix.
# Objective
Some collections are more efficient to construct when we know that every
element is unique in advance.
We have `EntitySetIterator`s from #16547, but currently no API to safely
make use of them this way.
## Solution
Add `FromEntitySetIterator` as a subtrait to `FromIterator`, and
implement it for the `EntityHashSet`/`hashbrown::HashSet` types.
To match the normal `FromIterator`, we also add a
`EntitySetIterator::collect_set` method.
It'd be better if these methods could shadow `from_iter` and `collect`
completely, but https://github.com/rust-lang/rust/issues/89151 is needed
for that.
While currently only `HashSet`s implement this trait, future
`UniqueEntityVec`/`UniqueEntitySlice` functionality comes with more
implementors.
Because `HashMap`s are collected from tuples instead of singular types,
implementing this same optimization for them is more complex, and has to
be done separately.
## Showcase
This is basically a free speedup for collecting `EntityHashSet`s!
```rust
pub fn collect_milk_dippers(dippers: Query<Entity, (With<Milk>, With<Cookies>)>) {
dippers.iter().collect_set::<EntityHashSet>();
// or
EntityHashSet::from_entity_set_iter(dippers);
}
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
# Objective
- Make `CustomCursor::Image` easier to work with by splitting the enum
variants off into `CustomCursorImage` and `CustomCursorUrl` structs and
deriving `Default` on those structs.
- Refs #17276.
## Testing
- Ran two examples: `cargo run --example custom_cursor_image
--features=custom_cursor` and `cargo run --example window_settings
--features=custom_cursor`
- CI.
---
## Migration Guide
The `CustomCursor` enum's variants now hold instances of
`CustomCursorImage` or `CustomCursorUrl`. Update your uses of
`CustomCursor` accordingly.
# Objective
The `is_empty` checks that are meant to stop zero-sized uinodes from
being extracted are missing from `extract_uinode_background_colors`,
`extract_uinode_images` and `extract_ui_material_nodes`.
## Solution
Put them back.
Implement procedural atmospheric scattering from [Sebastien Hillaire's
2020 paper](https://sebh.github.io/publications/egsr2020.pdf). This
approach should scale well even down to mobile hardware, and is
physically accurate.
## Co-author: @mate-h
He helped massively with getting this over the finish line, ensuring
everything was physically correct, correcting several places where I had
misunderstood or misapplied the paper, and improving the performance in
several places as well. Thanks!
## Credits
@aevyrie: helped find numerous bugs and improve the example to best show
off this feature :)
Built off of @mtsr's original branch, which handled the transmittance
lut (arguably the most important part)
## Showcase:
## For followup
- Integrate with pcwalton's volumetrics code
- refactor/reorganize for better integration with other effects
- have atmosphere transmittance affect directional lights
- add support for generating skybox/environment map
---------
Co-authored-by: Emerson Coskey <56370779+EmersonCoskey@users.noreply.github.com>
Co-authored-by: atlv <email@atlasdostal.com>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: Emerson Coskey <coskey@emerlabs.net>
Co-authored-by: Máté Homolya <mate.homolya@gmail.com>
# Objective
- Fix typo in `spin/portable-atomic` feature.
## Solution
- Replace with `spin/portable_atomic`
## Testing
- CI
---
## Notes
This is a very annoying design choice the `spin` developers made.
Because the _crate_ is called `portable-atomic` and is optional, Cargo
automatically registers the feature `portable-atomic`. But the
maintainers use `portable_atomic` for their _feature_ which enables the
support. Sneaks through CI because it's a valid feature and will only
cause breakage on atomically challenged platforms (which we currently
aren't testing in CI).
Should we test atomically challenged in CI? Right now I don't think so,
at least not until we've made "normal" `no_std` CI better with the main
`bevy` crate as the test-case rather than each individual crate.
# Objective
Make the examples look more uniform and more polished.
following the issue #17167
## Solution
- [x] Added a minimal UI explaining how to interact with the examples
only when needed.
- [x] Used the same notation for interactions ex : "Up Arrow: Move
Forward \nLeft / Right Arrow: Turn"
- [x] Set the color to
[GRAY](https://github.com/bevyengine/bevy/pull/17237#discussion_r1907560092)
when it's not visible enough
- [x] Changed some colors to be easy on the eyes
- [x] removed the //camera comment
- [x] Unified the use of capital letters in the examples.
- [x] Simplified the mesh2d_arc offset calculations.
...
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- Contributes to #16877
## Solution
- Moved `hashbrown`, `foldhash`, and related types out of `bevy_utils`
and into `bevy_platform_support`
- Refactored the above to match the layout of these types in `std`.
- Updated crates as required.
## Testing
- CI
---
## Migration Guide
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::hash`:
- `FixedState`
- `DefaultHasher`
- `RandomState`
- `FixedHasher`
- `Hashed`
- `PassHash`
- `PassHasher`
- `NoOpHash`
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::collections`:
- `HashMap`
- `HashSet`
- `bevy_utils::hashbrown` has been removed. Instead, import from
`bevy_platform_support::collections` _or_ take a dependency on
`hashbrown` directly.
- `bevy_utils::Entry` has been removed. Instead, import from
`bevy_platform_support::collections::hash_map` or
`bevy_platform_support::collections::hash_set` as appropriate.
- All of the above equally apply to `bevy::utils` and
`bevy::platform_support`.
## Notes
- I left `PreHashMap`, `PreHashMapExt`, and `TypeIdMap` in `bevy_utils`
as they might be candidates for micro-crating. They can always be moved
into `bevy_platform_support` at a later date if desired.
# Objective
- Contributes to #16877
## Solution
- Expanded `bevy_platform_support::sync` module to provide
API-compatible replacements for `std` items such as `RwLock`, `Mutex`,
and `OnceLock`.
- Removed `spin` from all crates except `bevy_platform_support`.
## Testing
- CI
---
## Notes
- The sync primitives, while verbose, entirely rely on `spin` for their
implementation requiring no `unsafe` and not changing the status-quo on
_how_ locks actually work within Bevy. This is just a refactoring to
consolidate the "hacks" and workarounds required to get a consistent
experience when either using `std::sync` or `spin`.
- I have opted to rely on `std::sync` for `std` compatible locks,
maintaining the status quo. However, now that we have these locks
factored out into the own module, it would be trivial to investigate
alternate locking backends, such as `parking_lot`.
- API for these locking types is entirely based on `std`. I have
implemented methods and types which aren't currently in use within Bevy
(e.g., `LazyLock` and `Once`) for the sake of completeness. As the
standard library is highly stable, I don't expect the Bevy and `std`
implementations to drift apart much if at all.
---------
Co-authored-by: BD103 <59022059+BD103@users.noreply.github.com>
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
The UI can only target a single view and doesn't support `RenderLayers`,
so there doesn't seem to be any need for UI nodes to require
`ViewVisibility` and `VisibilityClass`.
Fixes#17400
## Solution
Remove the `ViewVisibility` and `VisibilityClass` component requires
from `Node` and change the visibility queries to only query for
`InheritedVisibility`.
## Testing
```cargo run --example many_buttons --release --features "trace_tracy"```
Yellow is this PR, red is main.
`bevy_render::view::visibility::reset_view_visibility`
<img width="531" alt="reset-view" src="https://github.com/user-attachments/assets/a44b215d-96bf-43ec-8669-31530ff98eae" />
`bevy_render::view::visibility::check_visibility`
<img width="445" alt="view_visibility" src="https://github.com/user-attachments/assets/fa111757-da91-434d-88e4-80bdfa29374f" />
Right now, we always include distance fog in the shader, which is
unfortunate as it's complex code and is rare. This commit changes it to
be a `#define` instead. I haven't confirmed that removing distance fog
meaningfully reduces VGPR usage, but it can't hurt.
# Objective
Dependabot tried up update this earlier, but it was noticed that this
broke wasm builds. A new release has happened since then which includes
a fix for that.
Here's the
[changelog](https://github.com/smol-rs/async-broadcast/blob/master/CHANGELOG.md).
Closes#11830
## Solution
Use `async-broadcast` `0.7.2`.
## Testing
I ran a few some examples involving assets on macos / wasm.
# Objective
Fixes#17457
## Solution
#[derive(FromWorld)] now works with enums by specifying which variant
should be used.
## Showcase
```rust
#[Derive(FromWorld)]
enum Game {
#[from_world]
Playing,
Stopped
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
Make `Mesh::merge` more resilient to use.
Currently, it's difficult to make sure `Mesh::merge` will not panic
(we'd have to check if all attributes are compatible).
- I'd appreciate it for utility function to convert different mesh
representations such as:
https://github.com/dimforge/bevy_rapier/pull/628.
## Solution
- Make `Mesh::merge` return a `Result`.
## Testing
- It builds
## Migration Guide
- `Mesh::merge` now returns a `Result<(), MeshMergeError>`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Greeble <166992735+greeble-dev@users.noreply.github.com>
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
The doc comment for `Node::flex_basis` which refers to a`size` field
that was replaced by individual `width` and `height` fields sometime
ago.
## Solution
Refer to the individual fields instead.
# Objective
- Make the function signature for `ComponentHook` less verbose
## Solution
- Refactored `Entity`, `ComponentId`, and `Option<&Location>` into a new
`HookContext` struct.
## Testing
- CI
---
## Migration Guide
Update the function signatures for your component hooks to only take 2
arguments, `world` and `context`. Note that because `HookContext` is
plain data with all members public, you can use de-structuring to
simplify migration.
```rust
// Before
fn my_hook(
mut world: DeferredWorld,
entity: Entity,
component_id: ComponentId,
) { ... }
// After
fn my_hook(
mut world: DeferredWorld,
HookContext { entity, component_id, caller }: HookContext,
) { ... }
```
Likewise, if you were discarding certain parameters, you can use `..` in
the de-structuring:
```rust
// Before
fn my_hook(
mut world: DeferredWorld,
entity: Entity,
_: ComponentId,
) { ... }
// After
fn my_hook(
mut world: DeferredWorld,
HookContext { entity, .. }: HookContext,
) { ... }
```
# Objective
- Fix issue @mockersf identified with `example-showcase` where time was
not being received correctly from the render world.
## Solution
- Refactored to ensure `TimeReceiver` is always cleared even if it isn't
being used in the main world.
## Testing
- `cargo run -p example-showcase -- --page 1 --per-page 1 run
--screenshot-frame 200 --fixed-frame-time 0.0125 --stop-frame 450
--in-ci --show-logs`
# Objective
Alternative to #9660, which is outdated since "required components"
landed.
Fixes#9655
## Solution
This is a different approach than the linked PR, slotting the warning
into an existing check for zero or negative font sizes in the text
pipeline.
## Testing
Replaced a font size with `0.0` in `examples/ui/text.rs`.
```
2025-01-22T23:26:08.239688Z INFO bevy_winit::system: Creating new window App (0v1)
2025-01-22T23:26:08.617505Z WARN bevy_text::pipeline: Text span 10v1 has a font size <= 0.0. Nothing will be displayed.
```
# Objective
- Contributes to #15460
## Solution
- Switched `tracing` for `log` for the atomically challenged platforms
- Setup feature flags as required
- Added to `compile-check-no-std` CI task
- Made `crossbeam-channel` optional depending on `std`.
## Testing
- CI
---
## Notes
- `crossbeam-channel` provides a MPMC channel type which isn't readily
replicable in `no_std`, and is only used for a `bevy_render`
integration. As such, I've feature-gated the `TimeReceiver` and
`TimeSender` types.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Fixes#14708
Also fixes some commands not updating tracked location.
## Solution
`ObserverTrigger` has a new `caller` field with the
`track_change_detection` feature;
hooks take an additional caller parameter (which is `Some(…)` or `None`
depending on the feature).
## Testing
See the new tests in `src/observer/mod.rs`
---
## Showcase
Observers now know from where they were triggered (if
`track_change_detection` is enabled):
```rust
world.observe(move |trigger: Trigger<OnAdd, Foo>| {
println!("Added Foo from {}", trigger.caller());
});
```
## Migration
- hooks now take an additional `Option<&'static Location>` argument
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Contributes to #15460
## Solution
- Switched `tracing` for `log` for the atomically challenged platforms
- Setup feature flags as required
- Added to `compile-check-no-std` CI task
## Testing
- CI
---
## Notes
- _Very_ easy one this time. Most of the changes here are just feature
definitions and documentation within the `Cargo.toml`
# Objective
Add reflection support to more `glam` `Vec` types, specifically
* I8Vec2
* I8Vec3
* I8Vec4
* U8Vec2
* U8Vec3
* U8Vec4
* I16Vec2
* I16Vec3
* I16Vec4
* U16Vec2
* U16Vec3
* U16Vec4
I needed to do this because I'm using various of these in my Bevy types,
and due to the orphan rules, I can't make these impls locally.
## Solution
Used `impl_reflect!` like for the existing types.
## Testing
This should not require additional testing, though I have verified that
reflection now works for these types in my own project.
This commit makes Bevy use change detection to only update
`RenderMaterialInstances` and `RenderMeshMaterialIds` when meshes have
been added, changed, or removed. `extract_mesh_materials`, the system
that extracts these, now follows the pattern that
`extract_meshes_for_gpu_building` established.
This improves frame time of `many_cubes` from 3.9ms to approximately
3.1ms, which slightly surpasses the performance of Bevy 0.14.
(Resubmitted from #16878 to clean up history.)
---------
Co-authored-by: Charlotte McElwain <charlotte.c.mcelwain@gmail.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
## Objective
Most `try` methods on `World` return a `Result`, but `try_despawn` and
`try_insert_batch` don't. Since Bevy's error handling is advancing,
these should be brought in line.
## Solution
- Added `TryDespawnError` and `TryInsertBatchError`.
- `try_despawn`, `try_insert_batch`, and `try_insert_batch_if_new` now
return their respective errors.
- Fixed slightly incorrect behavior in `try_insert_batch_with_caller`.
- The method was always meant to continue with the rest of the batch if
an entity was missing, but that only worked after the first entity; if
the first entity was missing, the method would exit early. This has been
resolved.
## Migration Guide
- `World::try_despawn` now returns a `Result` rather than a `bool`.
- `World::try_insert_batch` and `World::try_insert_batch_if_new` now
return a `Result` where they previously returned nothing.
# Objective
`bevy_ecs`'s `system` module is something of a grab bag, and *very*
large. This is particularly true for the `system_param` module, which is
more than 2k lines long!
While it could be defensible to put `Res` and `ResMut` there (lol no
they're in change_detection.rs, obviously), it doesn't make any sense to
put the `Resource` trait there. This is confusing to navigate (and
painful to work on and review).
## Solution
- Create a root level `bevy_ecs/resource.rs` module to mirror
`bevy_ecs/component.rs`
- move the `Resource` trait to that module
- move the `Resource` derive macro to that module as well (Rust really
likes when you pun on the names of the derive macro and trait and put
them in the same path)
- fix all of the imports
## Notes to reviewers
- We could probably move more stuff into here, but I wanted to keep this
PR as small as possible given the absurd level of import changes.
- This PR is ground work for my upcoming attempts to store resource data
on components (resources-as-entities). Splitting this code out will make
the work and review a bit easier, and is the sort of overdue refactor
that's good to do as part of more meaningful work.
## Testing
cargo build works!
## Migration Guide
`bevy_ecs::system::Resource` has been moved to
`bevy_ecs::resource::Resource`.
# Objective
While being able to quickly add / remove components down a tree is
broadly useful (material changing!), it's particularly necessary when
combined with the newly added #13120.
## Solution
Write four methods: covering both adding and removal on both
`EntityWorldMut` and `EntityCommands`.
These methods are generic over the `RelationshipTarget`, thanks to the
freshly merged relations 🎉
## Testing
I've added a simple unit test for these methods.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
After #17398, Bevy now has relations! We don't teach users how to make /
work with these in the examples yet though, but we definitely should.
## Solution
- Add a simple abstract example that goes over defining, spawning,
traversing and removing a custom relations.
- ~~Add `Relationship` and `RelationshipTarget` to the prelude: the
trait methods are really helpful here.~~
- this causes subtle ambiguities with method names and weird compiler
errors. Not doing it here!
- Clean up related documentation that I referenced when writing this
example.
## Testing
`cargo run --example relationships`
## Notes to reviewers
1. Yes, I know that the cycle detection code could be more efficient. I
decided to reduce the caching to avoid distracting from the broader
point of "here's how you traverse relationships".
2. Instead of using an `App`, I've decide to use
`World::run_system_once` + system functions defined inside of `main` to
do something closer to literate programming.
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
Fixes#17412
## Objective
`Parent` uses the "has a X" naming convention. There is increasing
sentiment that we should use the "is a X" naming convention for
relationships (following #17398). This leaves `Children` as-is because
there is prevailing sentiment that `Children` is clearer than `ParentOf`
in many cases (especially when treating it like a collection).
This renames `Parent` to `ChildOf`.
This is just the implementation PR. To discuss the path forward, do so
in #17412.
## Migration Guide
- The `Parent` component has been renamed to `ChildOf`.
# Objective
Fixes#17416
## Solution
I just included ReflectFromReflect in all macros and implementations. I
think this should be ok, at least it compiles properly and does fix the
errors in my test code.
## Testing
I generated a DynamicMap and tried to convert it into a concrete
`HashMap` as a `Box<dyn Reflect>`. Without my fix, it doesn't work,
because this line panics:
```rust
let rfr = ty.data::<ReflectFromReflect>().unwrap();
```
where `ty` is the `TypeRegistration` for the (matching) `HashMap`.
I don't know why `ReflectFromReflect` wasn't included everywhere, I
assume that it was an oversight and not an architecture decision I'm not
aware of.
# Migration Guide
The hasher in reflected `HashMap`s and `HashSet`s now have to implement
`Default`. This is the case for the ones provided by Bevy already, and
is generally a sensible thing to do.
# Objective
Some usecases in the ecosystems are blocked by the inability to stop
bevy internals and third party plugins from touching their entities.
However the specifics of a general purpose entity disabling system are
controversial and further complicated by hierarchies. We can partially
unblock these usecases with an opt-in approach: default query filters.
## Solution
- Introduce DefaultQueryFilters, these filters are automatically applied
to queries that don't otherwise mention the filtered component.
- End users and third party plugins can register default filters and are
responsible for handling entities they have hidden this way.
- Extra features can be left for after user feedback
- The default value could later include official ways to hide entities
---
## Changelog
- Add DefaultQueryFilters
# Objective
Diagnostics for labels don't suggest how to best implement them.
```
error[E0277]: the trait bound `Label: ScheduleLabel` is not satisfied
--> src/main.rs:15:35
|
15 | let mut sched = Schedule::new(Label);
| ------------- ^^^^^ the trait `ScheduleLabel` is not implemented for `Label`
| |
| required by a bound introduced by this call
|
= help: the trait `ScheduleLabel` is implemented for `Interned<(dyn ScheduleLabel + 'static)>`
note: required by a bound in `bevy_ecs::schedule::Schedule::new`
--> /home/vj/workspace/rust/bevy/crates/bevy_ecs/src/schedule/schedule.rs:297:28
|
297 | pub fn new(label: impl ScheduleLabel) -> Self {
| ^^^^^^^^^^^^^ required by this bound in `Schedule::new`
```
## Solution
`diagnostics::on_unimplemented` and `diagnostics::do_not_recommend`
## Showcase
New error message:
```
error[E0277]: the trait bound `Label: ScheduleLabel` is not satisfied
--> src/main.rs:15:35
|
15 | let mut sched = Schedule::new(Label);
| ------------- ^^^^^ the trait `ScheduleLabel` is not implemented for `Label`
| |
| required by a bound introduced by this call
|
= note: consider annotating `Label` with `#[derive(ScheduleLabel)]`
note: required by a bound in `bevy_ecs::schedule::Schedule::new`
--> /home/vj/workspace/rust/bevy/crates/bevy_ecs/src/schedule/schedule.rs:297:28
|
297 | pub fn new(label: impl ScheduleLabel) -> Self {
| ^^^^^^^^^^^^^ required by this bound in `Schedule::new`
```
docs: enhance documentation in `query.rs` to clarify borrowing rules.
Please, let me know if you don't agree with the wording.. There is
always room for improvement.
Tested locally and it looks like this:
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
