## Objective
- Remove the second to last `bevy_animation` dependency on
`bevy_render`.
- Update some older documentation to reflect later changes to the crate.
## Narrative
I'm trying to make `bevy_animation` independent of `bevy_render`. The
documentation for `bevy_animation::AnimatableProperty` is one of the
last few dependencies. It uses `bevy_render::Projection` to demonstrate
animating an arbitrary value, but I thought that could be easily swapped
for something else.
I then realised that the rest of the documentation was a bit out of
date. Originally `AnimatableProperty` was the only way to animate a
property and so the documentation was quite detailed. But over time the
crate has gained more documentation and other ways to hook up
properties, leaving parts of the docs stale or covered elsewhere. So
I've slimmed down the `AnimatableProperty` docs and added a link to the
main alternative (`animated_field`).
I've probably swung too far towards brevity, so I can build them back up
if preferred. Also the example is kinda contrived and doesn't show the
range of `AnimatableProperty`, like being able to choose different
components. And finally the memes might be a bit stale?
## Showcase
## Testing
```
cargo doc -p bevy_animation --no-deps --all-features
cargo test -p bevy_animation --doc --all-features
```
Reduce dependencies on `bevy_render` by preferring `bevy_mesh` imports
over `bevy_render` re-exports.
```diff
- use bevy_render::mesh::Mesh;
+ use bevy_mesh::Mesh;
```
This is intended to help with #18423 (render crate restructure). Affects
`bevy_gltf`, `bevy_animation` and `bevy_picking`.
As part of #18423, I'm assuming there'll be a push to make crates less
dependent on the big render crates. This PR seemed like a small and safe
step along that path - it only changes imports and makes the `bevy_mesh`
crate dependency explicit in `Cargo.toml`. Any remaining dependencies on
`bevy_render` are true dependencies.
```
cargo run --example testbed_3d
cargo run --example mesh_picking
```
# Objective
Now that #13432 has been merged, it's important we update our reflected
types to properly opt into this feature. If we do not, then this could
cause issues for users downstream who want to make use of
reflection-based cloning.
## Solution
This PR is broken into 4 commits:
1. Add `#[reflect(Clone)]` on all types marked `#[reflect(opaque)]` that
are also `Clone`. This is mandatory as these types would otherwise cause
the cloning operation to fail for any type that contains it at any
depth.
2. Update the reflection example to suggest adding `#[reflect(Clone)]`
on opaque types.
3. Add `#[reflect(clone)]` attributes on all fields marked
`#[reflect(ignore)]` that are also `Clone`. This prevents the ignored
field from causing the cloning operation to fail.
Note that some of the types that contain these fields are also `Clone`,
and thus can be marked `#[reflect(Clone)]`. This makes the
`#[reflect(clone)]` attribute redundant. However, I think it's safer to
keep it marked in the case that the `Clone` impl/derive is ever removed.
I'm open to removing them, though, if people disagree.
4. Finally, I added `#[reflect(Clone)]` on all types that are also
`Clone`. While not strictly necessary, it enables us to reduce the
generated output since we can just call `Clone::clone` directly instead
of calling `PartialReflect::reflect_clone` on each variant/field. It
also means we benefit from any optimizations or customizations made in
the `Clone` impl, including directly dereferencing `Copy` values and
increasing reference counters.
Along with that change I also took the liberty of adding any missing
registrations that I saw could be applied to the type as well, such as
`Default`, `PartialEq`, and `Hash`. There were hundreds of these to
edit, though, so it's possible I missed quite a few.
That last commit is **_massive_**. There were nearly 700 types to
update. So it's recommended to review the first three before moving onto
that last one.
Additionally, I can break the last commit off into its own PR or into
smaller PRs, but I figured this would be the easiest way of doing it
(and in a timely manner since I unfortunately don't have as much time as
I used to for code contributions).
## Testing
You can test locally with a `cargo check`:
```
cargo check --workspace --all-features
```
# Objective
- Fixes#17960
## Solution
- Followed the [edition upgrade
guide](https://doc.rust-lang.org/edition-guide/editions/transitioning-an-existing-project-to-a-new-edition.html)
## Testing
- CI
---
## Summary of Changes
### Documentation Indentation
When using lists in documentation, proper indentation is now linted for.
This means subsequent lines within the same list item must start at the
same indentation level as the item.
```rust
/* Valid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
/* Invalid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
```
### Implicit `!` to `()` Conversion
`!` (the never return type, returned by `panic!`, etc.) no longer
implicitly converts to `()`. This is particularly painful for systems
with `todo!` or `panic!` statements, as they will no longer be functions
returning `()` (or `Result<()>`), making them invalid systems for
functions like `add_systems`. The ideal fix would be to accept functions
returning `!` (or rather, _not_ returning), but this is blocked on the
[stabilisation of the `!` type
itself](https://doc.rust-lang.org/std/primitive.never.html), which is
not done.
The "simple" fix would be to add an explicit `-> ()` to system
signatures (e.g., `|| { todo!() }` becomes `|| -> () { todo!() }`).
However, this is _also_ banned, as there is an existing lint which (IMO,
incorrectly) marks this as an unnecessary annotation.
So, the "fix" (read: workaround) is to put these kinds of `|| -> ! { ...
}` closuers into variables and give the variable an explicit type (e.g.,
`fn()`).
```rust
// Valid
let system: fn() = || todo!("Not implemented yet!");
app.add_systems(..., system);
// Invalid
app.add_systems(..., || todo!("Not implemented yet!"));
```
### Temporary Variable Lifetimes
The order in which temporary variables are dropped has changed. The
simple fix here is _usually_ to just assign temporaries to a named
variable before use.
### `gen` is a keyword
We can no longer use the name `gen` as it is reserved for a future
generator syntax. This involved replacing uses of the name `gen` with
`r#gen` (the raw-identifier syntax).
### Formatting has changed
Use statements have had the order of imports changed, causing a
substantial +/-3,000 diff when applied. For now, I have opted-out of
this change by amending `rustfmt.toml`
```toml
style_edition = "2021"
```
This preserves the original formatting for now, reducing the size of
this PR. It would be a simple followup to update this to 2024 and run
`cargo fmt`.
### New `use<>` Opt-Out Syntax
Lifetimes are now implicitly included in RPIT types. There was a handful
of instances where it needed to be added to satisfy the borrow checker,
but there may be more cases where it _should_ be added to avoid
breakages in user code.
### `MyUnitStruct { .. }` is an invalid pattern
Previously, you could match against unit structs (and unit enum
variants) with a `{ .. }` destructuring. This is no longer valid.
### Pretty much every use of `ref` and `mut` are gone
Pattern binding has changed to the point where these terms are largely
unused now. They still serve a purpose, but it is far more niche now.
### `iter::repeat(...).take(...)` is bad
New lint recommends using the more explicit `iter::repeat_n(..., ...)`
instead.
## Migration Guide
The lifetimes of functions using return-position impl-trait (RPIT) are
likely _more_ conservative than they had been previously. If you
encounter lifetime issues with such a function, please create an issue
to investigate the addition of `+ use<...>`.
## Notes
- Check the individual commits for a clearer breakdown for what
_actually_ changed.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
Fixes#17535
Bevy's approach to handling "entity mapping" during spawning and cloning
needs some work. The addition of
[Relations](https://github.com/bevyengine/bevy/pull/17398) both
[introduced a new "duplicate entities" bug when spawning scenes in the
scene system](#17535) and made the weaknesses of the current mapping
system exceedingly clear:
1. Entity mapping requires _a ton_ of boilerplate (implement or derive
VisitEntities and VisitEntitesMut, then register / reflect MapEntities).
Knowing the incantation is challenging and if you forget to do it in
part or in whole, spawning subtly breaks.
2. Entity mapping a spawned component in scenes incurs unnecessary
overhead: look up ReflectMapEntities, create a _brand new temporary
instance_ of the component using FromReflect, map the entities in that
instance, and then apply that on top of the actual component using
reflection. We can do much better.
Additionally, while our new [Entity cloning
system](https://github.com/bevyengine/bevy/pull/16132) is already pretty
great, it has some areas we can make better:
* It doesn't expose semantic info about the clone (ex: ignore or "clone
empty"), meaning we can't key off of that in places where it would be
useful, such as scene spawning. Rather than duplicating this info across
contexts, I think it makes more sense to add that info to the clone
system, especially given that we'd like to use cloning code in some of
our spawning scenarios.
* EntityCloner is currently built in a way that prioritizes a single
entity clone
* EntityCloner's recursive cloning is built to be done "inside out" in a
parallel context (queue commands that each have a clone of
EntityCloner). By making EntityCloner the orchestrator of the clone we
can remove internal arcs, improve the clarity of the code, make
EntityCloner mutable again, and simplify the builder code.
* EntityCloner does not currently take into account entity mapping. This
is necessary to do true "bullet proof" cloning, would allow us to unify
the per-component scene spawning and cloning UX, and ultimately would
allow us to use EntityCloner in place of raw reflection for scenes like
`Scene(World)` (which would give us a nice performance boost: fewer
archetype moves, less reflection overhead).
## Solution
### Improved Entity Mapping
First, components now have first-class "entity visiting and mapping"
behavior:
```rust
#[derive(Component, Reflect)]
#[reflect(Component)]
struct Inventory {
size: usize,
#[entities]
items: Vec<Entity>,
}
```
Any field with the `#[entities]` annotation will be viewable and
mappable when cloning and spawning scenes.
Compare that to what was required before!
```rust
#[derive(Component, Reflect, VisitEntities, VisitEntitiesMut)]
#[reflect(Component, MapEntities)]
struct Inventory {
#[visit_entities(ignore)]
size: usize,
items: Vec<Entity>,
}
```
Additionally, for relationships `#[entities]` is implied, meaning this
"just works" in scenes and cloning:
```rust
#[derive(Component, Reflect)]
#[relationship(relationship_target = Children)]
#[reflect(Component)]
struct ChildOf(pub Entity);
```
Note that Component _does not_ implement `VisitEntities` directly.
Instead, it has `Component::visit_entities` and
`Component::visit_entities_mut` methods. This is for a few reasons:
1. We cannot implement `VisitEntities for C: Component` because that
would conflict with our impl of VisitEntities for anything that
implements `IntoIterator<Item=Entity>`. Preserving that impl is more
important from a UX perspective.
2. We should not implement `Component: VisitEntities` VisitEntities in
the Component derive, as that would increase the burden of manual
Component trait implementors.
3. Making VisitEntitiesMut directly callable for components would make
it easy to invalidate invariants defined by a component author. By
putting it in the `Component` impl, we can make it harder to call
naturally / unavailable to autocomplete using `fn
visit_entities_mut(this: &mut Self, ...)`.
`ReflectComponent::apply_or_insert` is now
`ReflectComponent::apply_or_insert_mapped`. By moving mapping inside
this impl, we remove the need to go through the reflection system to do
entity mapping, meaning we no longer need to create a clone of the
target component, map the entities in that component, and patch those
values on top. This will make spawning mapped entities _much_ faster
(The default `Component::visit_entities_mut` impl is an inlined empty
function, so it will incur no overhead for unmapped entities).
### The Bug Fix
To solve #17535, spawning code now skips entities with the new
`ComponentCloneBehavior::Ignore` and
`ComponentCloneBehavior::RelationshipTarget` variants (note
RelationshipTarget is a temporary "workaround" variant that allows
scenes to skip these components. This is a temporary workaround that can
be removed as these cases should _really_ be using EntityCloner logic,
which should be done in a followup PR. When that is done,
`ComponentCloneBehavior::RelationshipTarget` can be merged into the
normal `ComponentCloneBehavior::Custom`).
### Improved Cloning
* `Option<ComponentCloneHandler>` has been replaced by
`ComponentCloneBehavior`, which encodes additional intent and context
(ex: `Default`, `Ignore`, `Custom`, `RelationshipTarget` (this last one
is temporary)).
* Global per-world entity cloning configuration has been removed. This
felt overly complicated, increased our API surface, and felt too
generic. Each clone context can have different requirements (ex: what a
user wants in a specific system, what a scene spawner wants, etc). I'd
prefer to see how far context-specific EntityCloners get us first.
* EntityCloner's internals have been reworked to remove Arcs and make it
mutable.
* EntityCloner is now directly stored on EntityClonerBuilder,
simplifying the code somewhat
* EntityCloner's "bundle scratch" pattern has been moved into the new
BundleScratch type, improving its usability and making it usable in
other contexts (such as future cross-world cloning code). Currently this
is still private, but with some higher level safe APIs it could be used
externally for making dynamic bundles
* EntityCloner's recursive cloning behavior has been "externalized". It
is now responsible for orchestrating recursive clones, meaning it no
longer needs to be sharable/clone-able across threads / read-only.
* EntityCloner now does entity mapping during clones, like scenes do.
This gives behavior parity and also makes it more generically useful.
* `RelatonshipTarget::RECURSIVE_SPAWN` is now
`RelationshipTarget::LINKED_SPAWN`, and this field is used when cloning
relationship targets to determine if cloning should happen recursively.
The new `LINKED_SPAWN` term was picked to make it more generically
applicable across spawning and cloning scenarios.
## Next Steps
* I think we should adapt EntityCloner to support cross world cloning. I
think this PR helps set the stage for that by making the internals
slightly more generalized. We could have a CrossWorldEntityCloner that
reuses a lot of this infrastructure.
* Once we support cross world cloning, we should use EntityCloner to
spawn `Scene(World)` scenes. This would yield significant performance
benefits (no archetype moves, less reflection overhead).
---------
Co-authored-by: eugineerd <70062110+eugineerd@users.noreply.github.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Cold Specialization
## Objective
An ongoing part of our quest to retain everything in the render world,
cold-specialization aims to cache pipeline specialization so that
pipeline IDs can be recomputed only when necessary, rather than every
frame. This approach reduces redundant work in stable scenes, while
still accommodating scenarios in which materials, views, or visibility
might change, as well as unlocking future optimization work like
retaining render bins.
## Solution
Queue systems are split into a specialization system and queue system,
the former of which only runs when necessary to compute a new pipeline
id. Pipelines are invalidated using a combination of change detection
and ECS ticks.
### The difficulty with change detection
Detecting “what changed” can be tricky because pipeline specialization
depends not only on the entity’s components (e.g., mesh, material, etc.)
but also on which view (camera) it is rendering in. In other words, the
cache key for a given pipeline id is a view entity/render entity pair.
As such, it's not sufficient simply to react to change detection in
order to specialize -- an entity could currently be out of view or could
be rendered in the future in camera that is currently disabled or hasn't
spawned yet.
### Why ticks?
Ticks allow us to ensure correctness by allowing us to compare the last
time a view or entity was updated compared to the cached pipeline id.
This ensures that even if an entity was out of view or has never been
seen in a given camera before we can still correctly determine whether
it needs to be re-specialized or not.
## Testing
TODO: Tested a bunch of different examples, need to test more.
## Migration Guide
TODO
- `AssetEvents` has been moved into the `PostUpdate` schedule.
---------
Co-authored-by: Patrick Walton <pcwalton@mimiga.net>
# Objective
- Contributes to #16877
## Solution
- Moved `hashbrown`, `foldhash`, and related types out of `bevy_utils`
and into `bevy_platform_support`
- Refactored the above to match the layout of these types in `std`.
- Updated crates as required.
## Testing
- CI
---
## Migration Guide
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::hash`:
- `FixedState`
- `DefaultHasher`
- `RandomState`
- `FixedHasher`
- `Hashed`
- `PassHash`
- `PassHasher`
- `NoOpHash`
- The following items were moved out of `bevy_utils` and into
`bevy_platform_support::collections`:
- `HashMap`
- `HashSet`
- `bevy_utils::hashbrown` has been removed. Instead, import from
`bevy_platform_support::collections` _or_ take a dependency on
`hashbrown` directly.
- `bevy_utils::Entry` has been removed. Instead, import from
`bevy_platform_support::collections::hash_map` or
`bevy_platform_support::collections::hash_set` as appropriate.
- All of the above equally apply to `bevy::utils` and
`bevy::platform_support`.
## Notes
- I left `PreHashMap`, `PreHashMapExt`, and `TypeIdMap` in `bevy_utils`
as they might be candidates for micro-crating. They can always be moved
into `bevy_platform_support` at a later date if desired.
# Objective
`bevy_ecs`'s `system` module is something of a grab bag, and *very*
large. This is particularly true for the `system_param` module, which is
more than 2k lines long!
While it could be defensible to put `Res` and `ResMut` there (lol no
they're in change_detection.rs, obviously), it doesn't make any sense to
put the `Resource` trait there. This is confusing to navigate (and
painful to work on and review).
## Solution
- Create a root level `bevy_ecs/resource.rs` module to mirror
`bevy_ecs/component.rs`
- move the `Resource` trait to that module
- move the `Resource` derive macro to that module as well (Rust really
likes when you pun on the names of the derive macro and trait and put
them in the same path)
- fix all of the imports
## Notes to reviewers
- We could probably move more stuff into here, but I wanted to keep this
PR as small as possible given the absurd level of import changes.
- This PR is ground work for my upcoming attempts to store resource data
on components (resources-as-entities). Splitting this code out will make
the work and review a bit easier, and is the sort of overdue refactor
that's good to do as part of more meaningful work.
## Testing
cargo build works!
## Migration Guide
`bevy_ecs::system::Resource` has been moved to
`bevy_ecs::resource::Resource`.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/17111
## Solution
Move `#![warn(clippy::allow_attributes,
clippy::allow_attributes_without_reason)]` to the workspace `Cargo.toml`
## Testing
Lots of CI testing, and local testing too.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
I realized that setting these to `deny` may have been a little
aggressive - especially since we upgrade warnings to denies in CI.
## Solution
Downgrades these lints to `warn`, so that compiles can work locally. CI
will still treat these as denies.
# Objective
Stumbled upon a `from <-> form` transposition while reviewing a PR,
thought it was interesting, and went down a bit of a rabbit hole.
## Solution
Fix em
# Objective
Allow tuple structs in the animated_field macro.
- for example `animated_field!(MyTupleStruct::0)`.
Fixes#16736
- This issue was partially fixed in #16747, where support for tuple
structs was added to `AnimatedField::new_unchecked`.
## Solution
Change the designator for `$field` in the macro from `ident` to `tt`.
## Testing
Expanded the doc test on `animated_field!` to include an example with a
tuple struct.
# Objective
Ensure the deny lint attributes added as a result of #17111 point to the
tracking issue.
## Solution
Change all existing instances of:
```rust
#![deny(clippy::allow_attributes, clippy::allow_attributes_without_reason)]
```
to
```rust
#![deny(
clippy::allow_attributes,
clippy::allow_attributes_without_reason,
reason = "See #17111; To be removed once all crates are in-line with these attributes"
)]
```
## Testing
N/A
# Objective
- Contributes to #11478
## Solution
- Made `bevy_utils::tracing` `doc(hidden)`
- Re-exported `tracing` from `bevy_log` for end-users
- Added `tracing` directly to crates that need it.
## Testing
- CI
---
## Migration Guide
If you were importing `tracing` via `bevy::utils::tracing`, instead use
`bevy::log::tracing`. Note that many items within `tracing` are also
directly re-exported from `bevy::log` as well, so you may only need
`bevy::log` for the most common items (e.g., `warn!`, `trace!`, etc.).
This also applies to the `log_once!` family of macros.
## Notes
- While this doesn't reduce the line-count in `bevy_utils`, it further
decouples the internal crates from `bevy_utils`, making its eventual
removal more feasible in the future.
- I have just imported `tracing` as we do for all dependencies. However,
a workspace dependency may be more appropriate for version management.
# Objective
- Contributes to #11478
- Contributes to #16877
## Solution
- Removed everything except `Instant` from `bevy_utils::time`
## Testing
- CI
---
## Migration Guide
If you relied on any of the following from `bevy_utils::time`:
- `Duration`
- `TryFromFloatSecsError`
Import these directly from `core::time` regardless of platform target
(WASM, mobile, etc.)
If you relied on any of the following from `bevy_utils::time`:
- `SystemTime`
- `SystemTimeError`
Instead import these directly from either `std::time` or `web_time` as
appropriate for your target platform.
## Notes
`Duration` and `TryFromFloatSecsError` are both re-exports from
`core::time` regardless of whether they are used from `web_time` or
`std::time`, so there is no value gained from re-exporting them from
`bevy_utils::time` as well. As for `SystemTime` and `SystemTimeError`,
no Bevy internal crates or examples rely on these types. Since Bevy
doesn't have a `Time<Wall>` resource for interacting with wall-time (and
likely shouldn't need one), I think removing these from `bevy_utils`
entirely and waiting for a use-case to justify inclusion is a reasonable
path forward.
# Objective
We want to deny the following lints:
* `clippy::allow_attributes` - Because there's no reason to
`#[allow(...)]` an attribute if it wouldn't lint against anything; you
should always use `#[expect(...)]`
* `clippy::allow_attributes_without_reason` - Because documenting the
reason for allowing/expecting a lint is always good
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_animation` in line with the new restrictions.
No code changes have been made - except if a lint that was previously
`allow(...)`'d could be removed via small code changes. For example,
`unused_variables` can be handled by adding a `_` to the beginning of a
field's name.
## Testing
I ran `cargo clippy`, and received no errors.
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/16556
- Closes https://github.com/bevyengine/bevy/issues/11807
## Solution
- Simplify custom projections by using a single source of truth -
`Projection`, removing all existing generic systems and types.
- Existing perspective and orthographic structs are no longer components
- I could dissolve these to simplify further, but keeping them around
was the fast way to implement this.
- Instead of generics, introduce a third variant, with a trait object.
- Do an object safety dance with an intermediate trait to allow cloning
boxed camera projections. This is a normal rust polymorphism papercut.
You can do this with a crate but a manual impl is short and sweet.
## Testing
- Added a custom projection example
---
## Showcase
- Custom projections and projection handling has been simplified.
- Projection systems are no longer generic, with the potential for many
different projection components on the same camera.
- Instead `Projection` is now the single source of truth for camera
projections, and is the only projection component.
- Custom projections are still supported, and can be constructed with
`Projection::custom()`.
## Migration Guide
- `PerspectiveProjection` and `OrthographicProjection` are no longer
components. Use `Projection` instead.
- Custom projections should no longer be inserted as a component.
Instead, simply set the custom projection as a value of `Projection`
with `Projection::custom()`.
# Objective
Some sort calls and `Ord` impls are unnecessarily complex.
## Solution
Rewrite the "match on cmp, if equal do another cmp" as either a
comparison on tuples, or `Ordering::then_with`, depending on whether the
compare keys need construction.
`sort_by` -> `sort_by_key` when symmetrical. Do the same for
`min_by`/`max_by`.
Note that `total_cmp` can only work with `sort_by`, and not on tuples.
When sorting collected query results that contain
`Entity`/`MainEntity`/`RenderEntity` in their `QueryData`, with that
`Entity` in the sort key:
stable -> unstable sort (all queried entities are unique)
If key construction is not simple, switch to `sort_by_cached_key` when
possible.
Sorts that are only performed to discover the maximal element are
replaced by `max_by_key`.
Dedicated comparison functions and structs are removed where simple.
Derive `PartialOrd`/`Ord` when useful.
Misc. closure style inconsistencies.
## Testing
- Existing tests.
# Objective
Fixes#16104
## Solution
I removed all instances of `:?` and put them back one by one where it
caused an error.
I removed some bevy_utils helper functions that were only used in 2
places and don't add value. See: #11478
## Testing
CI should catch the mistakes
## Migration Guide
`bevy::utils::{dbg,info,warn,error}` were removed. Use
`bevy::utils::tracing::{debug,info,warn,error}` instead.
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
# Objective
ensure that `animate_targets` runs **before**
`bevy_render::mesh::inherit_weights` to address the one-frame delay
Fixes#16554
## Solution
switch ordering constraints from `after` to `before`
## Testing
ran bevy_animation tests and the animated_fox example on MacOS
# Objective
- Contributes to #16892
## Solution
- Moved `Name` and `NameOrEntity` into `bevy_ecs::name`, and added them
to the prelude.
## Testing
- CI
## Migration Guide
If you were importing `Name` or `NameOrEntity` from `bevy_core`, instead
import from `bevy_ecs::name`.
---------
Co-authored-by: Christian Hughes <9044780+ItsDoot@users.noreply.github.com>
# Objective
Partially fixes#16736.
## Solution
`AnimatedField::new_unchecked` now supports tuple struct fields.
`animated_field!` is unchanged.
## Testing
Added a test to make sure common and simple uses of
`AnimatedField::new_unchecked` with tuple structs don't panic.
---------
Co-authored-by: yonzebu <yonzebu@gmail.com>
Updating dependencies; adopted version of #15696. (Supercedes #15696.)
Long answer: hashbrown is no longer using ahash by default, meaning that
we can't use the default-hasher methods with ahasher. So, we have to use
the longer-winded versions instead. This takes the opportunity to also
switch our default hasher as well, but without actually enabling the
default-hasher feature for hashbrown, meaning that we'll be able to
change our hasher more easily at the cost of all of these method calls
being obnoxious forever.
One large change from 0.15 is that `insert_unique_unchecked` is now
`unsafe`, and for cases where unsafe code was denied at the crate level,
I replaced it with `insert`.
## Migration Guide
`bevy_utils` has updated its version of `hashbrown` to 0.15 and now
defaults to `foldhash` instead of `ahash`. This means that if you've
hard-coded your hasher to `bevy_utils::AHasher` or separately used the
`ahash` crate in your code, you may need to switch to `foldhash` to
ensure that everything works like it does in Bevy.
# Objective
Fixes typos in bevy project, following suggestion in
https://github.com/bevyengine/bevy-website/pull/1912#pullrequestreview-2483499337
## Solution
I used https://github.com/crate-ci/typos to find them.
I included only the ones that feel undebatable too me, but I am not in
game engine so maybe some terms are expected.
I left out the following typos:
- `reparametrize` => `reparameterize`: There are a lot of occurences, I
believe this was expected
- `semicircles` => `hemicircles`: 2 occurences, may mean something
specific in geometry
- `invertation` => `inversion`: may mean something specific
- `unparented` => `parentless`: may mean something specific
- `metalness` => `metallicity`: may mean something specific
## Testing
- Did you test these changes? If so, how? I did not test the changes,
most changes are related to raw text. I expect the others to be tested
by the CI.
- Are there any parts that need more testing? I do not think
- How can other people (reviewers) test your changes? Is there anything
specific they need to know? To me there is nothing to test
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
---
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
(kept in case I include the `reparameterize` change here)
- If this PR is a breaking change (relative to the last release of
Bevy), describe how a user might need to migrate their code to support
these changes
- Simply adding new functionality is not a breaking change.
- Fixing behavior that was definitely a bug, rather than a questionable
design choice is not a breaking change.
## Questions
- [x] Should I include the above typos? No
(https://github.com/bevyengine/bevy/pull/16702#issuecomment-2525271152)
- [ ] Should I add `typos` to the CI? (I will check how to configure it
properly)
This project looks awesome, I really enjoy reading the progress made,
thanks to everyone involved.
# Objective
- Remove `derive_more`'s error derivation and replace it with
`thiserror`
## Solution
- Added `derive_more`'s `error` feature to `deny.toml` to prevent it
sneaking back in.
- Reverted to `thiserror` error derivation
## Notes
Merge conflicts were too numerous to revert the individual changes, so
this reversion was done manually. Please scrutinise carefully during
review.
# Objective
- Fixes#16208
## Solution
- Added an associated type to `Component`, `Mutability`, which flags
whether a component is mutable, or immutable. If `Mutability= Mutable`,
the component is mutable. If `Mutability= Immutable`, the component is
immutable.
- Updated `derive_component` to default to mutable unless an
`#[component(immutable)]` attribute is added.
- Updated `ReflectComponent` to check if a component is mutable and, if
not, panic when attempting to mutate.
## Testing
- CI
- `immutable_components` example.
---
## Showcase
Users can now mark a component as `#[component(immutable)]` to prevent
safe mutation of a component while it is attached to an entity:
```rust
#[derive(Component)]
#[component(immutable)]
struct Foo {
// ...
}
```
This prevents creating an exclusive reference to the component while it
is attached to an entity. This is particularly powerful when combined
with component hooks, as you can now fully track a component's value,
ensuring whatever invariants you desire are upheld. Before this would be
done my making a component private, and manually creating a `QueryData`
implementation which only permitted read access.
<details>
<summary>Using immutable components as an index</summary>
```rust
/// This is an example of a component like [`Name`](bevy::prelude::Name), but immutable.
#[derive(Clone, Copy, PartialEq, Eq, PartialOrd, Ord, Hash, Component)]
#[component(
immutable,
on_insert = on_insert_name,
on_replace = on_replace_name,
)]
pub struct Name(pub &'static str);
/// This index allows for O(1) lookups of an [`Entity`] by its [`Name`].
#[derive(Resource, Default)]
struct NameIndex {
name_to_entity: HashMap<Name, Entity>,
}
impl NameIndex {
fn get_entity(&self, name: &'static str) -> Option<Entity> {
self.name_to_entity.get(&Name(name)).copied()
}
}
fn on_insert_name(mut world: DeferredWorld<'_>, entity: Entity, _component: ComponentId) {
let Some(&name) = world.entity(entity).get::<Name>() else {
unreachable!()
};
let Some(mut index) = world.get_resource_mut::<NameIndex>() else {
return;
};
index.name_to_entity.insert(name, entity);
}
fn on_replace_name(mut world: DeferredWorld<'_>, entity: Entity, _component: ComponentId) {
let Some(&name) = world.entity(entity).get::<Name>() else {
unreachable!()
};
let Some(mut index) = world.get_resource_mut::<NameIndex>() else {
return;
};
index.name_to_entity.remove(&name);
}
// Setup our name index
world.init_resource::<NameIndex>();
// Spawn some entities!
let alyssa = world.spawn(Name("Alyssa")).id();
let javier = world.spawn(Name("Javier")).id();
// Check our index
let index = world.resource::<NameIndex>();
assert_eq!(index.get_entity("Alyssa"), Some(alyssa));
assert_eq!(index.get_entity("Javier"), Some(javier));
// Changing the name of an entity is also fully capture by our index
world.entity_mut(javier).insert(Name("Steven"));
// Javier changed their name to Steven
let steven = javier;
// Check our index
let index = world.resource::<NameIndex>();
assert_eq!(index.get_entity("Javier"), None);
assert_eq!(index.get_entity("Steven"), Some(steven));
```
</details>
Additionally, users can use `Component<Mutability = ...>` in trait
bounds to enforce that a component _is_ mutable or _is_ immutable. When
using `Component` as a trait bound without specifying `Mutability`, any
component is applicable. However, methods which only work on mutable or
immutable components are unavailable, since the compiler must be
pessimistic about the type.
## Migration Guide
- When implementing `Component` manually, you must now provide a type
for `Mutability`. The type `Mutable` provides equivalent behaviour to
earlier versions of `Component`:
```rust
impl Component for Foo {
type Mutability = Mutable;
// ...
}
```
- When working with generic components, you may need to specify that
your generic parameter implements `Component<Mutability = Mutable>`
rather than `Component` if you require mutable access to said component.
- The entity entry API has had to have some changes made to minimise
friction when working with immutable components. Methods which
previously returned a `Mut<T>` will now typically return an
`OccupiedEntry<T>` instead, requiring you to add an `into_mut()` to get
the `Mut<T>` item again.
## Draft Release Notes
Components can now be made immutable while stored within the ECS.
Components are the fundamental unit of data within an ECS, and Bevy
provides a number of ways to work with them that align with Rust's rules
around ownership and borrowing. One part of this is hooks, which allow
for defining custom behavior at key points in a component's lifecycle,
such as addition and removal. However, there is currently no way to
respond to _mutation_ of a component using hooks. The reasons for this
are quite technical, but to summarize, their addition poses a
significant challenge to Bevy's core promises around performance.
Without mutation hooks, it's relatively trivial to modify a component in
such a way that breaks invariants it intends to uphold. For example, you
can use `core::mem::swap` to swap the components of two entities,
bypassing the insertion and removal hooks.
This means the only way to react to this modification is via change
detection in a system, which then begs the question of what happens
_between_ that alteration and the next run of that system?
Alternatively, you could make your component private to prevent
mutation, but now you need to provide commands and a custom `QueryData`
implementation to allow users to interact with your component at all.
Immutable components solve this problem by preventing the creation of an
exclusive reference to the component entirely. Without an exclusive
reference, the only way to modify an immutable component is via removal
or replacement, which is fully captured by component hooks. To make a
component immutable, simply add `#[component(immutable)]`:
```rust
#[derive(Component)]
#[component(immutable)]
struct Foo {
// ...
}
```
When implementing `Component` manually, there is an associated type
`Mutability` which controls this behavior:
```rust
impl Component for Foo {
type Mutability = Mutable;
// ...
}
```
Note that this means when working with generic components, you may need
to specify that a component is mutable to gain access to certain
methods:
```rust
// Before
fn bar<C: Component>() {
// ...
}
// After
fn bar<C: Component<Mutability = Mutable>>() {
// ...
}
```
With this new tool, creating index components, or caching data on an
entity should be more user friendly, allowing libraries to provide APIs
relying on components and hooks to uphold their invariants.
## Notes
- ~~I've done my best to implement this feature, but I'm not happy with
how reflection has turned out. If any reflection SMEs know a way to
improve this situation I'd greatly appreciate it.~~ There is an
outstanding issue around the fallibility of mutable methods on
`ReflectComponent`, but the DX is largely unchanged from `main` now.
- I've attempted to prevent all safe mutable access to a component that
does not implement `Component<Mutability = Mutable>`, but there may
still be some methods I have missed. Please indicate so and I will
address them, as they are bugs.
- Unsafe is an escape hatch I am _not_ attempting to prevent. Whatever
you do with unsafe is between you and your compiler.
- I am marking this PR as ready, but I suspect it will undergo fairly
major revisions based on SME feedback.
- I've marked this PR as _Uncontroversial_ based on the feature, not the
implementation.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
Co-authored-by: Gino Valente <49806985+MrGVSV@users.noreply.github.com>
Co-authored-by: Nuutti Kotivuori <naked@iki.fi>
# Objective
Animating component fields requires too much boilerplate at the moment:
```rust
#[derive(Reflect)]
struct FontSizeProperty;
impl AnimatableProperty for FontSizeProperty {
type Component = TextFont;
type Property = f32;
fn get_mut(component: &mut Self::Component) -> Option<&mut Self::Property> {
Some(&mut component.font_size)
}
}
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableKeyframeCurve::new(
[0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0]
.into_iter()
.zip([24.0, 80.0, 24.0, 80.0, 24.0, 80.0, 24.0]),
)
.map(AnimatableCurve::<FontSizeProperty, _>::from_curve)
.expect("should be able to build translation curve because we pass in valid samples"),
);
```
## Solution
This adds `AnimatedField` and an `animated_field!` macro, enabling the
following:
```rust
animation_clip.add_curve_to_target(
animation_target_id,
AnimatableCurve::new(
animated_field!(TextFont::font_size),
AnimatableKeyframeCurve::new(
[0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0]
.into_iter()
.zip([24.0, 80.0, 24.0, 80.0, 24.0, 80.0, 24.0]),
)
.expect(
"should be able to build translation curve because we pass in valid samples",
),
),
);
```
This required reworking the internals a bit, namely stripping out a lot
of the `Reflect` usage, as that implementation was fundamentally
incompatible with the `AnimatedField` pattern. `Reflect` was being used
in this context just to downcast traits. But we can get downcasting
behavior without the `Reflect` requirement by implementing `Downcast`
for `AnimationCurveEvaluator`.
This also reworks "evaluator identity" to support either a (Component /
Field) pair, or a TypeId. This allows properties to reuse evaluators,
even if they have different accessor methods. The "contract" here is
that for a given (Component / Field) pair, the accessor will return the
same value. Fields are identified by their Reflect-ed field index. The
(TypeId, usize) is prehashed and cached to optimize for lookup speed.
This removes the built-in hard-coded TranslationCurve / RotationCurve /
ScaleCurve in favor of AnimatableField.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
I'm not sure why, but somehow `#[derive(Reflect)]` on a tuple struct
with a boxed trait object can result in linker errors when dynamic
linking is used on Windows using `rust-lld`:
```
= note: rust-lld: error: <root>: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..reflect..PartialReflect$u20$for$u20$bevy_animation..AnimationEventFn$GT$::reflect_partial_eq::hc4cce1dc55e42e0b␍
rust-lld: error: <root>: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..from_reflect..FromReflect$u20$for$u20$bevy_animation..AnimationEventFn$GT$::from_reflect::hc2b1d575b8491092␍
rust-lld: error: <root>: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..tuple_struct..TupleStruct$u20$for$u20$bevy_animation..AnimationEventFn$GT$::clone_dynamic::hab42a4edc8d6b5c2␍
rust-lld: error: <root>: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..tuple_struct..TupleStruct$u20$for$u20$bevy_animation..AnimationEventFn$GT$::field::h729a3d6dd6a27a43␍
rust-lld: error: <root>: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..tuple_struct..TupleStruct$u20$for$u20$bevy_animation..AnimationEventFn$GT$::field_mut::hde1c34846d77344b␍
rust-lld: error: <root>: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..type_registry..GetTypeRegistration$u20$for$u20$bevy_animation..AnimationEventFn$GT$::get_type_registration::hb96eb543e403a132␍
rust-lld: error: <root>: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..type_registry..GetTypeRegistration$u20$for$u20$bevy_animation..AnimationEventFn$GT$::register_type_dependencies::hcf1a4b69bcfea6ae␍
rust-lld: error: undefined symbol: bevy_animation::_::_$LT$impl$u20$bevy_reflect..reflect..PartialReflect$u20$for$u20$bevy_animation..AnimationEventFn$GT$::reflect_partial_eq::hc4cce1dc55e42e0b␍
```
etc.
Adding `#[reflect(opaque)]` to the `Reflect` derive fixes the problem,
and that's what this patch does. I think that adding
`#[reflect(opaque)]` is harmless, as there's little that reflection
allows with a boxed trait object anyhow.
# Objective
Needing to derive `AnimationEvent` for `Event` is unnecessary, and the
trigger logic coupled to it feels like we're coupling "event producer"
logic with the event itself, which feels wrong. It also comes with a
bunch of complexity, which is again unnecessary. We can have the
flexibility of "custom animation event trigger logic" without this
coupling and complexity.
The current `animation_events` example is also needlessly complicated,
due to it needing to work around system ordering issues. The docs
describing it are also slightly wrong. We can make this all a non-issue
by solving the underlying ordering problem.
Related to this, we use the `bevy_animation::Animation` system set to
solve PostUpdate animation order-of-operations issues. If we move this
to bevy_app as part of our "core schedule", we can cut out needless
`bevy_animation` crate dependencies in these instances.
## Solution
- Remove `AnimationEvent`, the derive, and all other infrastructure
associated with it (such as the `bevy_animation/derive` crate)
- Replace all instances of `AnimationEvent` traits with `Event + Clone`
- Store and use functions for custom animation trigger logic (ex:
`clip.add_event_fn()`). For "normal" cases users dont need to think
about this and should use the simpler `clip.add_event()`
- Run the `Animation` system set _before_ updating text
- Move `bevy_animation::Animation` to `bevy_app::Animation`. Remove
unnecessary `bevy_animation` dependency from `bevy_ui`
- Adjust `animation_events` example to use the simpler `clip.add_event`
API, as the workarounds are no longer necessary
This is polishing work that will land in 0.15, and I think it is simple
enough and valuable enough to land in 0.15 with it, in the interest of
making the feature as compelling as possible.
# Objective
We currently use special "floating" constructors for `EasingCurve`,
`FunctionCurve`, and `ConstantCurve` (ex: `easing_curve`). This erases
the type being created (and in general "what is happening"
structurally), for very minimal ergonomics improvements. With rare
exceptions, we prefer normal `X::new()` constructors over floating `x()`
constructors in Bevy. I don't think this use case merits special casing
here.
## Solution
Add `EasingCurve::new()`, use normal constructors everywhere, and remove
the floating constructors.
I think this should land in 0.15 in the interest of not breaking people
later.
# Objective
In the existing implementation, additive blending effectively treats the
node with least index specially by basically forcing its weight to be
`1.0` regardless of what its computed weight would be (based on the
weights in the `AnimationGraph` and `AnimationPlayer`).
Arguably this makes some amount of sense, because the "base" animation
is often one which was not authored to be used additively, meaning that
its sampled values are interpreted absolutely rather than as deltas.
However, this also leads to strange behavior with respect to animation
masks: if the "base" animation is masked out on some target, then the
next node is treated as the "base" animation, despite the fact that it
would normally be interpreted additively, and the weight of that
animation is thrown away as a result.
This is all kind of weird and revolves around special treatment (if the
behavior is even really intentional in the first place). From a
mathematical standpoint, there is nothing special about how the "base"
animation must be treated other than having a weight of 1.0 under an
`Add` node, which is something that the user can do without relying on
some bizarre corner-case behavior of the animation system — this is the
only present situation under which weights are discarded.
This PR changes this behavior so that the weight of every node is
incorporated. In other words, for an animation graph that looks like
this:
```text
┌───────────────┐
│Base clip ┼──┐
│ 0.5 │ │
└───────────────┘ │
┌───────────────┐ │ ┌───────────────┐ ┌────┐
│Additive clip 1┼──┼─►┤Additive blend ┼────►│Root│
│ 0.1 │ │ │ 1.0 │ └────┘
└───────────────┘ │ └───────────────┘
┌───────────────┐ │
│Additive clip 2┼──┘
│ 0.2 │
└───────────────┘
```
Previously, the result would have been
```text
base_clip + 0.1 * additive_clip_1 + 0.2 * additive_clip_2
```
whereas now it would be
```text
0.5 * base_clip + 0.1 * additive_clip_1 + 0.2 * additive_clip_2
```
and in the scenario where `base_clip` is masked out:
```text
additive_clip_1 + 0.2 * additive_clip_2
```
vs.
```text
0.1 * additive_clip_1 + 0.2 * additive_clip_2
```
## Solution
For background, the way that the additive blending procedure works is
something like this:
- During graph traversal, the node values and weights of the children
are pushed onto the evaluator `stack`. The traversal order guarantees
that the item with least node index will be on top.
- Once we reach the `Add` node itself, we start popping off the `stack`
and into the evaluator's `blend_register`, which is an accumulator
holding up to one weight-value pair:
- If the `blend_register` is empty, it is filled using data from the top
of the `stack`.
- Otherwise, the `blend_register` is combined with data popped from the
`stack` and updated.
In the example above, the additive blending steps would look like this
(with the pre-existing implementation):
1. The `blend_register` is empty, so we pop `(base_clip, 0.5)` from the
top of the `stack` and put it in. Now the value of the `blend_register`
is `(base_clip, 0.5)`.
2. The `blend_register` is non-empty: we pop `(additive_clip_1, 0.1)`
from the top of the `stack` and combine it additively with the value in
the `blend_register`, forming `(base_clip + 0.1 * additive_clip_1, 0.6)`
in the `blend_register` (the carried weight value goes unused).
3. The `blend_register` is non-empty: we pop `(additive_clip_2, 0.2)`
from the top of the `stack` and combine it additively with the value in
the `blend_register`, forming `(base_clip + 0.1 * additive_clip_1 + 0.2
* additive_clip_2, 0.8)` in the `blend_register`.
The solution in this PR changes step 1: the `base_clip` is multiplied by
its weight as it is added to the `blend_register` in the first place,
yielding `0.5 * base_clip + 0.1 * additive_clip_1 + 0.2 *
additive_clip_2` as the final result.
### Note for reviewers
It might be tempting to look at the code, which contains a segment that
looks like this:
```rust
if additive {
current_value = A::blend(
[
BlendInput {
weight: 1.0, // <--
value: current_value,
additive: true,
},
BlendInput {
weight: weight_to_blend,
value: value_to_blend,
additive: true,
},
]
.into_iter(),
);
}
```
and conclude that the explicit value of `1.0` is responsible for
overwriting the weight of the base animation. This is incorrect.
Rather, this additive blend has to be written this way because it is
multiplying the *existing value in the blend register* by 1 (i.e. not
doing anything) before adding the next value to it. Changing this to
another quantity (e.g. the existing weight) would cause the value in the
blend register to be spuriously multiplied down.
## Testing
Tested on `animation_masks` example. Checked `morph_weights` example as
well.
## Migration Guide
I will write a migration guide later if this change is not included in
0.15.
# Objective
- Less code
- Better iterator (implements `size_hint` for example)
## Solution
- Use `either`
- This change is free because `bevy_animation` depends on `bevy_asset`,
which already depends on `either`
## Testing
CI
# Objective
Bevy seems to want to standardize on "American English" spellings. Not
sure if this is laid out anywhere in writing, but see also #15947.
While perusing the docs for `typos`, I noticed that it has a `locale`
config option and tried it out.
## Solution
Switch to `en-us` locale in the `typos` config and run `typos -w`
## Migration Guide
The following methods or fields have been renamed from `*dependants*` to
`*dependents*`.
- `ProcessorAssetInfo::dependants`
- `ProcessorAssetInfos::add_dependant`
- `ProcessorAssetInfos::non_existent_dependants`
- `AssetInfo::dependants_waiting_on_load`
- `AssetInfo::dependants_waiting_on_recursive_dep_load`
- `AssetInfos::loader_dependants`
- `AssetInfos::remove_dependants_and_labels`
Fixes#15834
## Migration Guide
The APIs of `Time`, `Timer` and `Stopwatch` have been cleaned up for
consistency with each other and the standard library's `Duration` type.
The following methods have been renamed:
- `Stowatch::paused` -> `Stopwatch::is_paused`
- `Time::elapsed_seconds` -> `Time::elasped_secs` (including `_f64` and
`_wrapped` variants)
# Objective
Animation docs could use some clarification regarding:
- how exactly curves are evaluated
- how additive blend nodes actually work
## Solution
Add some documentation that explains how curve domains are used and how
additive blend nodes treat their children.
## Commentary
The way additive blend nodes work right now is a little bit weird, since
their first child's weight is ignored. Arguably this makes sense, since
additive animations are authored differently from ordinary animations,
but it also feels a bit strange. We could make the first node's weight
actually be applied, and the present behavior would be recovered when
the weight is set to 1.
The main disadvantage of how things are set up now is that combining a
bunch of additive animations without a base pose is pretty awkward (e.g.
to add them onto a base pose later in the graph). If we changed it, the
main downside would be that reusing the same animation on different
parts of the graph is harder; on the other hand, the weights can be
locally reassigned by using blend nodes with no other children, which
rectifies this shortfall.
# Objective
The other `Curve -> AnimationCurve` wrappers allow public access to the
inner curve, so this one should as well.
## Solution
Made the field public. Instances will still need to be constructed using
the (more ergonomic) `from_curve` method, which infers the phantom type
for the user.
# Objective
- Closes#15716
- Closes#15718
## Solution
- Replace `Handle<MeshletMesh>` with a new `MeshletMesh3d` component
- As expected there were some random things that needed fixing:
- A couple tests were storing handles just to prevent them from being
dropped I believe, which seems to have been unnecessary in some.
- The `SpriteBundle` still had a `Handle<Image>` field. I've removed
this.
- Tests in `bevy_sprite` incorrectly added a `Handle<Image>` field
outside of the `Sprite` component.
- A few examples were still inserting `Handle`s, switched those to their
corresponding wrappers.
- 2 examples that were still querying for `Handle<Image>` were changed
to query `Sprite`
## Testing
- I've verified that the changed example work now
## Migration Guide
`Handle` can no longer be used as a `Component`. All existing Bevy types
using this pattern have been wrapped in their own semantically
meaningful type. You should do the same for any custom `Handle`
components your project needs.
The `Handle<MeshletMesh>` component is now `MeshletMesh3d`.
The `WithMeshletMesh` type alias has been removed. Use
`With<MeshletMesh3d>` instead.
# Objective
- Closes#15717
## Solution
- Wrap the handle in a new wrapper component: `AnimationGraphHandle`.
## Testing
Searched for all instances of `AnimationGraph` in the examples and
updated and tested those
## Migration Guide
`Handle<AnimationGraph>` is no longer a component. Instead, use the
`AnimationGraphHandle` component which contains a
`Handle<AnimationGraph>`.
# Objective
Fix a couple of substantial errors found during the development of
#15665:
- `AnimationCurveEvaluator::add` was secretly unreachable. In other
words, additive blending never actually occurred.
- Weights from the animation graph nodes were ignored, and only
`ActiveAnimation`'s weights were used.
## Solution
Made additive blending reachable and included the graph node weight in
the weight of the stack elements appended in the curve application loop
of `animate_targets`.
## Testing
Tested on existing examples and on the new example added in #15665.
# Objective
I completely forgot that animation events are triggered in two separate
systems (sorry). The issue ~~fixed~~ by #15677, can still happen if the
animation event is not targeting a specific bone.
## Solution
_Realy_ don't trigger animation events for paused animations.
# Objective
Pausing the `animated_fox` example perfectly as one of the feet hits the
ground causes the event to be triggered every frame.
Context: #15538
## Solution
Don't trigger animation events if the animation is paused.
## Testing
Ran the example, I no longer see the issue.
# Objective
- bevy_render is gargantuan
## Solution
- Split out bevy_mesh
## Testing
- Ran some examples, everything looks fine
## Migration Guide
`bevy_render::mesh::morph::inherit_weights` is now
`bevy_render::mesh::inherit_weights`
if you were using `Mesh::compute_aabb`, you will need to `use
bevy_render::mesh::MeshAabb;` now
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
