# Objective
Now that #13432 has been merged, it's important we update our reflected
types to properly opt into this feature. If we do not, then this could
cause issues for users downstream who want to make use of
reflection-based cloning.
## Solution
This PR is broken into 4 commits:
1. Add `#[reflect(Clone)]` on all types marked `#[reflect(opaque)]` that
are also `Clone`. This is mandatory as these types would otherwise cause
the cloning operation to fail for any type that contains it at any
depth.
2. Update the reflection example to suggest adding `#[reflect(Clone)]`
on opaque types.
3. Add `#[reflect(clone)]` attributes on all fields marked
`#[reflect(ignore)]` that are also `Clone`. This prevents the ignored
field from causing the cloning operation to fail.
Note that some of the types that contain these fields are also `Clone`,
and thus can be marked `#[reflect(Clone)]`. This makes the
`#[reflect(clone)]` attribute redundant. However, I think it's safer to
keep it marked in the case that the `Clone` impl/derive is ever removed.
I'm open to removing them, though, if people disagree.
4. Finally, I added `#[reflect(Clone)]` on all types that are also
`Clone`. While not strictly necessary, it enables us to reduce the
generated output since we can just call `Clone::clone` directly instead
of calling `PartialReflect::reflect_clone` on each variant/field. It
also means we benefit from any optimizations or customizations made in
the `Clone` impl, including directly dereferencing `Copy` values and
increasing reference counters.
Along with that change I also took the liberty of adding any missing
registrations that I saw could be applied to the type as well, such as
`Default`, `PartialEq`, and `Hash`. There were hundreds of these to
edit, though, so it's possible I missed quite a few.
That last commit is **_massive_**. There were nearly 700 types to
update. So it's recommended to review the first three before moving onto
that last one.
Additionally, I can break the last commit off into its own PR or into
smaller PRs, but I figured this would be the easiest way of doing it
(and in a timely manner since I unfortunately don't have as much time as
I used to for code contributions).
## Testing
You can test locally with a `cargo check`:
```
cargo check --workspace --all-features
```
# Objective
- Contributes to #15460
## Solution
- Added two new features, `std` (default) and `alloc`, gating `std` and
`alloc` behind them respectively.
- Added missing `f32` functions to `std_ops` as required. These `f32`
methods have been added to the `clippy.toml` deny list to aid in
`no_std` development.
## Testing
- CI
- `cargo clippy -p bevy_math --no-default-features --features libm
--target "x86_64-unknown-none"`
- `cargo test -p bevy_math --no-default-features --features libm`
- `cargo test -p bevy_math --no-default-features --features "libm,
alloc"`
- `cargo test -p bevy_math --no-default-features --features "libm,
alloc, std"`
- `cargo test -p bevy_math --no-default-features --features "std"`
## Notes
The following items require the `alloc` feature to be enabled:
- `CubicBSpline`
- `CubicBezier`
- `CubicCardinalSpline`
- `CubicCurve`
- `CubicGenerator`
- `CubicHermite`
- `CubicNurbs`
- `CyclicCubicGenerator`
- `RationalCurve`
- `RationalGenerator`
- `BoxedPolygon`
- `BoxedPolyline2d`
- `BoxedPolyline3d`
- `SampleCurve`
- `SampleAutoCurve`
- `UnevenSampleCurve`
- `UnevenSampleAutoCurve`
- `EvenCore`
- `UnevenCore`
- `ChunkedUnevenCore`
This requirement could be relaxed in certain cases, but I had erred on
the side of gating rather than modifying. Since `no_std` is a new set of
platforms we are adding support to, and the `alloc` feature is enabled
by default, this is not a breaking change.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
Co-authored-by: Matty <2975848+mweatherley@users.noreply.github.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
The `new` constructors for our ray types currently take a `Vec2`/`Vec3`
instead of a `Dir2`/`Dir3`. This is confusing and footgunny for several
reasons.
- Which one of these is the direction? You can't see it from the type.
```rust
let ray = Ray2d::new(Vec2::X, Vec2::X);
```
- Many engines allow unnormalized rays, and this can affect ray cast
results by scaling the time of impact. However, in Bevy, rays are
*always* normalized despite what the input argument in this case
implies, and ray cast results are *not* scaled.
```rust
// The true ray direction is still normalized, unlike what you'd expect.
let ray = Ray2d::new(Vec2::X, Vec2::new(5.0, 0.0, 0.0)));
```
These cases are what the direction types are intended for, and we should
use them as such.
## Solution
Use `Dir2`/`Dir3` in the constructors.
```rust
let ray = Ray2d::new(Vec2::X, Dir2::X);
```
We *could* also use `impl TryInto<DirN>`, which would allow both vectors
and direction types, and then panic if the input is not normalized. This
could be fine for ergonomics in some cases, but especially for rays, I
think it's better to take an explicit direction type here.
---
## Migration Guide
`Ray2d::new` and `Ray3d::new` now take a `Dir2` and `Dir3` instead of
`Vec2` and `Vec3` respectively for the ray direction.
# Objective
Fixes#13535.
## Solution
I implemented `Reflect` for close to all math types now, except for some
types that it would cause issues (like some boxed types).
## Testing
- Everything seems to still build, will await CI though.
---
## Changelog
- Made close to all math types implement `Reflect`.
# Objective
Split up from #12017, rename Bevy's direction types.
Currently, Bevy has the `Direction2d`, `Direction3d`, and `Direction3dA`
types, which provide a type-level guarantee that their contained vectors
remain normalized. They can be very useful for a lot of APIs for safety,
explicitness, and in some cases performance, as they can sometimes avoid
unnecessary normalizations.
However, many consider them to be inconvenient to use, and opt for
standard vector types like `Vec3` because of this. One reason is that
the direction type names are a bit long and can be annoying to write (of
course you can use autocomplete, but just typing `Vec3` is still nicer),
and in some intances, the extra characters can make formatting worse.
The naming is also inconsistent with Glam's shorter type names, and
results in names like `Direction3dA`, which (in my opinion) are
difficult to read and even a bit ugly.
This PR proposes renaming the types to `Dir2`, `Dir3`, and `Dir3A`.
These names are nice and easy to write, consistent with Glam, and work
well for variants like the SIMD aligned `Dir3A`. As a bonus, it can also
result in nicer formatting in a lot of cases, which can be seen from the
diff of this PR.
Some examples of what it looks like: (copied from #12017)
```rust
// Before
let ray_cast = RayCast2d::new(Vec2::ZERO, Direction2d::X, 5.0);
// After
let ray_cast = RayCast2d::new(Vec2::ZERO, Dir2::X, 5.0);
```
```rust
// Before (an example using Bevy XPBD)
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Direction3d::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
// After
let hit = spatial_query.cast_ray(
Vec3::ZERO,
Dir3::X,
f32::MAX,
true,
SpatialQueryFilter::default(),
);
```
```rust
// Before
self.circle(
Vec3::new(0.0, -2.0, 0.0),
Direction3d::Y,
5.0,
Color::TURQUOISE,
);
// After (formatting is collapsed in this case)
self.circle(Vec3::new(0.0, -2.0, 0.0), Dir3::Y, 5.0, Color::TURQUOISE);
```
## Solution
Rename `Direction2d`, `Direction3d`, and `Direction3dA` to `Dir2`,
`Dir3`, and `Dir3A`.
---
## Migration Guide
The `Direction2d` and `Direction3d` types have been renamed to `Dir2`
and `Dir3`.
## Additional Context
This has been brought up on the Discord a few times, and we had a small
[poll](https://discord.com/channels/691052431525675048/1203087353850364004/1212465038711984158)
on this. `Dir2`/`Dir3`/`Dir3A` was quite unanimously chosen as the best
option, but of course it was a very small poll and inconclusive, so
other opinions are certainly welcome too.
---------
Co-authored-by: IceSentry <c.giguere42@gmail.com>
# Objective
Split up from #12017, add an aligned version of `Direction3d` for SIMD,
and move direction types out of `primitives`.
## Solution
Add `Direction3dA` and move direction types into a new `direction`
module.
---
## Migration Guide
The `Direction2d`, `Direction3d`, and `InvalidDirectionError` types have
been moved out of `bevy::math::primitives`.
Before:
```rust
use bevy::math::primitives::Direction3d;
```
After:
```rust
use bevy::math::Direction3d;
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
A better alternative version of #10843.
Currently, Bevy has a single `Ray` struct for 3D. To allow better
interoperability with Bevy's primitive shapes (#10572) and some third
party crates (that handle e.g. spatial queries), it would be very useful
to have separate versions for 2D and 3D respectively.
## Solution
Separate `Ray` into `Ray2d` and `Ray3d`. These new structs also take
advantage of the new primitives by using `Direction2d`/`Direction3d` for
the direction:
```rust
pub struct Ray2d {
pub origin: Vec2,
pub direction: Direction2d,
}
pub struct Ray3d {
pub origin: Vec3,
pub direction: Direction3d,
}
```
and by using `Plane2d`/`Plane3d` in `intersect_plane`:
```rust
impl Ray2d {
// ...
pub fn intersect_plane(&self, plane_origin: Vec2, plane: Plane2d) -> Option<f32> {
// ...
}
}
```
---
## Changelog
### Added
- `Ray2d` and `Ray3d`
- `Ray2d::new` and `Ray3d::new` constructors
- `Plane2d::new` and `Plane3d::new` constructors
### Removed
- Removed `Ray` in favor of `Ray3d`
### Changed
- `direction` is now a `Direction2d`/`Direction3d` instead of a vector,
which provides guaranteed normalization
- `intersect_plane` now takes a `Plane2d`/`Plane3d` instead of just a
vector for the plane normal
- `Direction2d` and `Direction3d` now derive `Serialize` and
`Deserialize` to preserve ray (de)serialization
## Migration Guide
`Ray` has been renamed to `Ray3d`.
### Ray creation
Before:
```rust
Ray {
origin: Vec3::ZERO,
direction: Vec3::new(0.5, 0.6, 0.2).normalize(),
}
```
After:
```rust
// Option 1:
Ray3d {
origin: Vec3::ZERO,
direction: Direction3d::new(Vec3::new(0.5, 0.6, 0.2)).unwrap(),
}
// Option 2:
Ray3d::new(Vec3::ZERO, Vec3::new(0.5, 0.6, 0.2))
```
### Plane intersections
Before:
```rust
let result = ray.intersect_plane(Vec2::X, Vec2::Y);
```
After:
```rust
let result = ray.intersect_plane(Vec2::X, Plane2d::new(Vec2::Y));
```
# Objective
Fixes#6378
`bevy_transform` is missing a feature corresponding to the `serialize` feature on the `bevy` crate.
## Solution
Adds a `serialize` feature to `bevy_transform`.
Derives `serde::Serialize` and `Deserialize` when feature is enabled.
# Objective
Add a method for getting a world space ray from a viewport position.
Opted to add a `Ray` type to `bevy_math` instead of returning a tuple of `Vec3`'s as this is clearer and easier to document
The docs on `viewport_to_world` are okay, but I'm not super happy with them.
## Changelog
* Add `Camera::viewport_to_world`
* Add `Camera::ndc_to_world`
* Add `Ray` to `bevy_math`
* Some doc tweaks
Co-authored-by: devil-ira <justthecooldude@gmail.com>
