- Fixes#18781
- Moved `LogPlugin` into its own file gated behind a new `tracing`
feature.
- Used `log` instead of `tracing` where possible.
- Exposed a new `tracing` feature in `bevy` which enables
`bevy_log/tracing`.
- Gated `LogPlugin` from `DefaultPlugins` on `tracing` feature.
- CI
---
- If you were previously using `bevy_log` with default features
disabled, enable the new `std` and `tracing` features.
- If you were using `bevy` with the default features disabled, enable
the new `tracing` feature.
Almost all of the diffs in this PR come from moving `LogPlugin` into its
own file. This just makes the PR less noisy, since the alternative is
excessive `#[cfg(feature = "tracing")]` directives all over the plugin.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
PR #17898 disabled bindless support for `ExtendedMaterial`. This commit
adds it back. It also adds a new example, `extended_material_bindless`,
showing how to use it.
There are two related problems here:
1. Users should be able to change the fallback behavior of *all*
ECS-based errors in their application by setting the
`GLOBAL_ERROR_HANDLER`. See #18351 for earlier work in this vein.
2. The existing solution (#15500) for customizing this behavior is high
on boilerplate, not global and adds a great deal of complexity.
The consensus is that the default behavior when a parameter fails
validation should be set based on the kind of system parameter in
question: `Single` / `Populated` should silently skip the system, but
`Res` should panic. Setting this behavior at the system level is a
bandaid that makes getting to that ideal behavior more painful, and can
mask real failures (if a resource is missing but you've ignored a system
to make the Single stop panicking you're going to have a bad day).
I've removed the existing `ParamWarnPolicy`-based configuration, and
wired up the `GLOBAL_ERROR_HANDLER`/`default_error_handler` to the
various schedule executors to properly plumb through errors .
Additionally, I've done a small cleanup pass on the corresponding
example.
I've run the `fallible_params` example, with both the default and a
custom global error handler. The former panics (as expected), and the
latter spams the error console with warnings 🥲
1. Currently, failed system param validation will result in endless
console spam. Do you want me to implement a solution for warn_once-style
debouncing somehow?
2. Currently, the error reporting for failed system param validation is
very limited: all we get is that a system param failed validation and
the name of the system. Do you want me to implement improved error
reporting by bubbling up errors in this PR?
3. There is broad consensus that the default behavior for failed system
param validation should be set on a per-system param basis. Would you
like me to implement that in this PR?
My gut instinct is that we absolutely want to solve 2 and 3, but it will
be much easier to do that work (and review it) if we split the PRs
apart.
`ParamWarnPolicy` and the `WithParamWarnPolicy` have been removed
completely. Failures during system param validation are now handled via
the `GLOBAL_ERROR_HANDLER`: please see the `bevy_ecs::error` module docs
for more information.
---------
Co-authored-by: MiniaczQ <xnetroidpl@gmail.com>
# Objective
- Fixes#18225
## Solution
- Updated `accesskit` version requirement from 0.17 to 0.18
- Updated `accesskit_winit` version requirement from 0.23 to 0.25
## Testing
- Ran CI checks locally.
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Objective
- ECS error handling is a lovely flagship feature for Bevy 0.16, all in
the name of reducing panics and encouraging better error handling
(#14275).
- Currently though, command and system error handling are completely
disjoint and use different mechanisms.
- Additionally, there's a number of distinct ways to set the
default/fallback/global error handler that have limited value. As far as
I can tell, this will be cfg flagged to toggle between dev and
production builds in 99.9% of cases, with no real value in more granular
settings or helpers.
- Fixes#17272
## Solution
- Standardize error handling on the OnceLock global error mechanisms
ironed out in https://github.com/bevyengine/bevy/pull/17215
- As discussed there, there are serious performance concerns there,
especially for commands
- I also think this is a better fit for the use cases, as it's truly
global
- Move from `SystemErrorContext` to a more general purpose
`ErrorContext`, which can handle observers and commands more clearly
- Cut the superfluous setter methods on `App` and `SubApp`
- Rename the limited (and unhelpful) `fallible_systems` example to
`error_handling`, and add an example of command error handling
## Testing
Ran the `error_handling` example.
## Notes for reviewers
- Do you see a clear way to allow commands to retain &mut World access
in the per-command custom error handlers? IMO that's a key feature here
(allowing the ad-hoc creation of custom commands), but I'm not sure how
to get there without exploding complexity.
- I've removed the feature gate on the default_error_handler: contrary
to @cart's opinion in #17215 I think that virtually all apps will want
to use this. Can you think of a category of app that a) is extremely
performance sensitive b) is fine with shipping to production with the
panic error handler? If so, I can try to gather performance numbers
and/or reintroduce the feature flag. UPDATE: see benches at the end of
this message.
- ~~`OnceLock` is in `std`: @bushrat011899 what should we do here?~~
- Do you have ideas for more automated tests for this collection of
features?
## Benchmarks
I checked the impact of the feature flag introduced: benchmarks might
show regressions. This bears more investigation. I'm still skeptical
that there are users who are well-served by a fast always panicking
approach, but I'm going to re-add the feature flag here to avoid
stalling this out.
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
- Fixes#17506
- Fixes#16258
## Solution
- Added a new folder of examples, `no_std`, similar to the `mobile`
folder.
- Added a single example, `no_std_library`, which demonstrates how to
make a `no_std` compatible Bevy library.
- Added a new CI task, `check-compiles-no-std-examples`, which checks
that `no_std` examples compile on `no_std` targets.
- Added `bevy_platform_support::prelude` to `bevy::prelude`.
## Testing
- CI
---
## Notes
- I've structured the folders here to permit further `no_std` examples
(e.g., GameBoy Games, ESP32 firmware, etc.), but I am starting with the
simplest and least controversial example.
- I've tried to be as clear as possible with the documentation for this
example, catering to an audience who may not have even heard of `no_std`
before.
---------
Co-authored-by: Greeble <166992735+greeble-dev@users.noreply.github.com>
# Objective
Some of Bevy's examples contain boilerplate which is split out into the
`helpers` folder. This allows examples to have access to common
functionality without building into Bevy directly. However, these
helpers are themselves quite high-quality code, and we do intend for
users to read them and even use them. But, we don't list them in the
examples document, and they aren't explicitly checked in CI, only
transitively through examples which import them.
## Solution
- Added `camera_controller` and `widgets` as library examples.
## Testing
- CI
---
## Notes
- Library examples are identical to any other example, just with
`crate-type = ["lib"]` in the `Cargo.toml`. Since they are marked as
libraries, they don't require a `main` function but do require public
items to be documented.
- Library examples opens the possibility of creating examples which
don't need to be actual runnable applications. This may be more
appropriate for certain ECS examples, and allows for adding helpers
which (currently) don't have an example that needs them without them
going stale.
- I learned about this as a concept during research for `no_std`
examples, but believe it has value for Bevy outside that specific niche.
---------
Co-authored-by: mgi388 <135186256+mgi388@users.noreply.github.com>
Co-authored-by: Carter Weinberg <weinbergcarter@gmail.com>
# Objective
- Prevent usage of `println!`, `eprintln!` and the like because they
require `std`
- Fixes#17446
## Solution
- Enable the `print_stdout` and `print_stderr` clippy lints
- Replace all `println!` and `eprintln!` occurrences with `log::*` where
applicable or alternatively ignore the warnings
## Testing
- Run `cargo clippy --workspace` to ensure that there are no warnings
relating to printing to `stdout` or `stderr`
# Objective
Correct spelling
## Solution
Fix typos, specifically ones that I found in folders other than /crates
## Testing
CI
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- In `Camera::viewport_to_world_2d`, `Camera::viewport_to_world`,
`Camera::world_to_viewport` and `Camera::world_to_viewport_with_depth`,
the results were incorrect when the `Camera::viewport` field was
configured with a viewport position that was non-zero. This PR attempts
to correct that.
- Fixes#16200
## Solution
- This PR now takes the viewport position into account in the functions
mentioned above.
- Extended `2d_viewport_to_world` example to test the functions with a
dynamic viewport position and size, camera positions and zoom levels. It
is probably worth discussing whether to change the example, add a new
one or just completely skip touching the examples.
## Testing
Used the modified example to test the functions with dynamic camera
transform as well as dynamic viewport size and position.
# Objective
WESL's pre-MVP `0.1.0` has been
[released](https://docs.rs/wesl/latest/wesl/)!
Add support for WESL shader source so that we can begin playing and
testing WESL, as well as aiding in their development.
## Solution
Adds a `ShaderSource::WESL` that can be used to load `.wesl` shaders.
Right now, we don't support mixing `naga-oil`. Additionally, WESL
shaders currently need to pass through the naga frontend, which the WESL
team is aware isn't great for performance (they're working on compiling
into naga modules). Also, since our shaders are managed using the asset
system, we don't currently support using file based imports like `super`
or package scoped imports. Further work will be needed to asses how we
want to support this.
---
## Showcase
See the `shader_material_wesl` example. Be sure to press space to
activate party mode (trigger conditional compilation)!
https://github.com/user-attachments/assets/ec6ad19f-b6e4-4e9d-a00f-6f09336b08a4
# Objective
- Contributes to #15460
- Supersedes #8520
- Fixes#4906
## Solution
- Added a new `web` feature to `bevy`, and several of its crates.
- Enabled new `web` feature automatically within crates without `no_std`
support.
## Testing
- `cargo build --no-default-features --target wasm32v1-none`
---
## Migration Guide
When using Bevy crates which _don't_ automatically enable the `web`
feature, please enable it when building for the browser.
## Notes
- I added [`cfg_if`](https://crates.io/crates/cfg-if) to help manage
some of the feature gate gore that this extra feature introduces. It's
still pretty ugly, but I think much easier to read.
- Certain `wasm` targets (e.g.,
[wasm32-wasip1](https://doc.rust-lang.org/nightly/rustc/platform-support/wasm32-wasip1.html#wasm32-wasip1))
provide an incomplete implementation for `std`. I have not tested these
platforms, but I suspect Bevy's liberal use of usually unsupported
features (e.g., threading) will cause these targets to fail. As such,
consider `wasm32-unknown-unknown` as the only `wasm` platform with
support from Bevy for `std`. All others likely will need to be treated
as `no_std` platforms.
# Objective
- Fixes#15460 (will open new issues for further `no_std` efforts)
- Supersedes #17715
## Solution
- Threaded in new features as required
- Made certain crates optional but default enabled
- Removed `compile-check-no-std` from internal `ci` tool since GitHub CI
can now simply check `bevy` itself now
- Added CI task to check `bevy` on `thumbv6m-none-eabi` to ensure
`portable-atomic` support is still valid [^1]
[^1]: This may be controversial, since it could be interpreted as
implying Bevy will maintain support for `thumbv6m-none-eabi` going
forward. In reality, just like `x86_64-unknown-none`, this is a
[canary](https://en.wiktionary.org/wiki/canary_in_a_coal_mine) target to
make it clear when `portable-atomic` no longer works as intended (fixing
atomic support on atomically challenged platforms). If a PR comes
through and makes supporting this class of platforms impossible, then
this CI task can be removed. I however wager this won't be a problem.
## Testing
- CI
---
## Release Notes
Bevy now has support for `no_std` directly from the `bevy` crate.
Users can disable default features and enable a new `default_no_std`
feature instead, allowing `bevy` to be used in `no_std` applications and
libraries.
```toml
# Bevy for `no_std` platforms
bevy = { version = "0.16", default-features = false, features = ["default_no_std"] }
```
`default_no_std` enables certain required features, such as `libm` and
`critical-section`, and as many optional crates as possible (currently
just `bevy_state`). For atomically-challenged platforms such as the
Raspberry Pi Pico, `portable-atomic` will be used automatically.
For library authors, we recommend depending on `bevy` with
`default-features = false` to allow `std` and `no_std` users to both
depend on your crate. Here are some recommended features a library crate
may want to expose:
```toml
[features]
# Most users will be on a platform which has `std` and can use the more-powerful `async_executor`.
default = ["std", "async_executor"]
# Features for typical platforms.
std = ["bevy/std"]
async_executor = ["bevy/async_executor"]
# Features for `no_std` platforms.
libm = ["bevy/libm"]
critical-section = ["bevy/critical-section"]
[dependencies]
# We disable default features to ensure we don't accidentally enable `std` on `no_std` targets, for example.
bevy = { version = "0.16", default-features = false }
```
While this is verbose, it gives the maximum control to end-users to
decide how they wish to use Bevy on their platform.
We encourage library authors to experiment with `no_std` support. For
libraries relying exclusively on `bevy` and no other dependencies, it
may be as simple as adding `#![no_std]` to your `lib.rs` and exposing
features as above! Bevy can also provide many `std` types, such as
`HashMap`, `Mutex`, and `Instant` on all platforms. See
`bevy::platform_support` for details on what's available out of the box!
## Migration Guide
- If you were previously relying on `bevy` with default features
disabled, you may need to enable the `std` and `async_executor`
features.
- `bevy_reflect` has had its `bevy` feature removed. If you were relying
on this feature, simply enable `smallvec` and `smol_str` instead.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- have a testbed for UI
## Solution
- move previous `ui` example to `full_ui`
- add a testbed ui with several scenes
- `ui_layout_rounding` is one of those scenes, so remove it as a
standalone example
the previous `ui` / new `full_ui` is I think still useful as it has some
things like scroll, debug ui that are not shown anywhere else
# Objective
- Attempts to fix#17876.
## Solution
- Reverted some changes that added a glob pattern to match all
`compile_fail` crates. This should enable Dependabot to create PRs
again.
- Added a TODO comment to not forget that this glob matching failure
should also be fixed in the Dependabot repo.
# Objective
Implements and closes#17515
## Solution
Add `uv_transform` to `ColorMaterial`
## Testing
Create a example similar to `repeated_texture` but for `Mesh2d` and
`MeshMaterial2d<ColorMaterial>`
## Showcase
## Migration Guide
Add `uv_transform` field to constructors of `ColorMaterial`
# Objective
- Fixes#17960
## Solution
- Followed the [edition upgrade
guide](https://doc.rust-lang.org/edition-guide/editions/transitioning-an-existing-project-to-a-new-edition.html)
## Testing
- CI
---
## Summary of Changes
### Documentation Indentation
When using lists in documentation, proper indentation is now linted for.
This means subsequent lines within the same list item must start at the
same indentation level as the item.
```rust
/* Valid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
/* Invalid */
/// - Item 1
/// Run-on sentence.
/// - Item 2
struct Foo;
```
### Implicit `!` to `()` Conversion
`!` (the never return type, returned by `panic!`, etc.) no longer
implicitly converts to `()`. This is particularly painful for systems
with `todo!` or `panic!` statements, as they will no longer be functions
returning `()` (or `Result<()>`), making them invalid systems for
functions like `add_systems`. The ideal fix would be to accept functions
returning `!` (or rather, _not_ returning), but this is blocked on the
[stabilisation of the `!` type
itself](https://doc.rust-lang.org/std/primitive.never.html), which is
not done.
The "simple" fix would be to add an explicit `-> ()` to system
signatures (e.g., `|| { todo!() }` becomes `|| -> () { todo!() }`).
However, this is _also_ banned, as there is an existing lint which (IMO,
incorrectly) marks this as an unnecessary annotation.
So, the "fix" (read: workaround) is to put these kinds of `|| -> ! { ...
}` closuers into variables and give the variable an explicit type (e.g.,
`fn()`).
```rust
// Valid
let system: fn() = || todo!("Not implemented yet!");
app.add_systems(..., system);
// Invalid
app.add_systems(..., || todo!("Not implemented yet!"));
```
### Temporary Variable Lifetimes
The order in which temporary variables are dropped has changed. The
simple fix here is _usually_ to just assign temporaries to a named
variable before use.
### `gen` is a keyword
We can no longer use the name `gen` as it is reserved for a future
generator syntax. This involved replacing uses of the name `gen` with
`r#gen` (the raw-identifier syntax).
### Formatting has changed
Use statements have had the order of imports changed, causing a
substantial +/-3,000 diff when applied. For now, I have opted-out of
this change by amending `rustfmt.toml`
```toml
style_edition = "2021"
```
This preserves the original formatting for now, reducing the size of
this PR. It would be a simple followup to update this to 2024 and run
`cargo fmt`.
### New `use<>` Opt-Out Syntax
Lifetimes are now implicitly included in RPIT types. There was a handful
of instances where it needed to be added to satisfy the borrow checker,
but there may be more cases where it _should_ be added to avoid
breakages in user code.
### `MyUnitStruct { .. }` is an invalid pattern
Previously, you could match against unit structs (and unit enum
variants) with a `{ .. }` destructuring. This is no longer valid.
### Pretty much every use of `ref` and `mut` are gone
Pattern binding has changed to the point where these terms are largely
unused now. They still serve a purpose, but it is far more niche now.
### `iter::repeat(...).take(...)` is bad
New lint recommends using the more explicit `iter::repeat_n(..., ...)`
instead.
## Migration Guide
The lifetimes of functions using return-position impl-trait (RPIT) are
likely _more_ conservative than they had been previously. If you
encounter lifetime issues with such a function, please create an issue
to investigate the addition of `+ use<...>`.
## Notes
- Check the individual commits for a clearer breakdown for what
_actually_ changed.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
-
[`nonstandard_macro_braces`](https://rust-lang.github.io/rust-clippy/master/index.html#nonstandard_macro_braces)
is a Clippy lint that enforces what braces certain known macros are
allowed to use.
- For instance, requiring `println!()` instead of `println!{}`.
- I started working on this after seeing
https://github.com/TheBevyFlock/bevy_cli/issues/277.
## Solution
- Enable `nonstandard_macro_braces` in the workspace.
- Configure Clippy so it enforces `[]` braces for `children!`.
## Testing
1. Create `examples/clippy_test.rs`.
2. Paste the following code:
```rust
//! Some docs woooooooo
use bevy::prelude::*;
fn main() {
let _ = children!(Name::new("Foo"));
}
```
3. Run `cargo clippy --example clippy_test`.
4. Ensure the following warning is emitted:
```sh
warning: use of irregular braces for `children!` macro
--> examples/clippy_test.rs:6:13
|
6 | let _ = children!(Name::new("Foo"));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: consider writing: `children![Name::new("Foo")]`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonstandard_macro_braces
= note: requested on the command line with `-W clippy::nonstandard-macro-braces`
warning: `bevy` (example "clippy_test") generated 1 warning (run `cargo clippy --fix --example "clippy_test"` to apply 1 suggestion)
```
## Objective
Get rid of a redundant Cargo feature flag.
## Solution
Use the built-in `target_abi = "sim"` instead of a custom Cargo feature
flag, which is set for the iOS (and visionOS and tvOS) simulator. This
has been stable since Rust 1.78.
In the future, some of this may become redundant if Wgpu implements
proper supper for the iOS Simulator:
https://github.com/gfx-rs/wgpu/issues/7057
CC @mockersf who implemented [the original
fix](https://github.com/bevyengine/bevy/pull/10178).
## Testing
- Open mobile example in Xcode.
- Launch the simulator.
- See that no errors are emitted.
- Remove the code cfg-guarded behind `target_abi = "sim"`.
- See that an error now happens.
(I haven't actually performed these steps on the latest `main`, because
I'm hitting an unrelated error (EDIT: It was
https://github.com/bevyengine/bevy/pull/17637). But tested it on
0.15.0).
---
## Migration Guide
> If you're using a project that builds upon the mobile example, remove
the `ios_simulator` feature from your `Cargo.toml` (Bevy now handles
this internally).
This commit builds on top of the work done in #16589 and #17051, by
adding support for fallible observer systems.
As with the previous work, the actual results of the observer system are
suppressed for now, but the intention is to provide a way to handle
errors in a global way.
Until then, you can use a `PipeSystem` to manually handle results.
---------
Signed-off-by: Jean Mertz <git@jeanmertz.com>
# Objective
Bevy's ECS provides several core traits such as `Component`,
`SystemParam`, etc that determine where a type can be used. When reading
the docs, this currently requires scrolling down to and scanning the
"Trait Implementations" section. Make these core traits more visible.
## Solution
Add a color-coded labels below the type heading denoting the following
types:
- `Component`
- immutable components are labeled as such
- `Resource`
- `Asset`
- `Event`
- `Plugin` & `PluginGroup`
- `ScheduleLabel` & `SystemSet`
- `SystemParam`
As docs.rs does not provide an option for post-processing the html,
these are added via JS with traits implementations being detected by
scanning the DOM. Rustdoc's html output is unstable, which could
potentially lead to this detection (or the adding of the labels) to
break, however it only needs to work when a new release is deployed and
falls back to the status quo of not displaying these labels.
Idea by JMS55, implementation by Jondolf (see
https://github.com/Jondolf/bevy_docs_extension_demo/).
## Testing
Run this in Bevy's root folder:
```bash
RUSTDOCFLAGS="--html-after-content docs-rs/trait-tags.html --cfg docsrs_dep" RUSTFLAGS="--cfg docsrs_dep" cargo doc --no-deps -p <some_bevy_package>
```
---
## Showcase
Check it out on
[docs.rs](https://docs.rs/bevy_docs_extension_demo/0.1.1/bevy_docs_extension_demo/struct.TestAllTraits.html)
## Release Notes
On docs.rs, Bevy now displays labels indicating which core traits a type
implements:
If you want to add these to your own crate, check out [these
instructions](https://github.com/bevyengine/bevy/blob/main/docs-rs#3rd-party-crates).
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: Carter Weinberg <weinbergcarter@gmail.com>
# Objective
- It's currently very hard for beginners and advanced users to get a
full understanding of a complete render phase.
## Solution
- Implement a full custom render phase
- The render phase in the example is intended to show a custom stencil
phase that renders the stencil in red directly on the screen
---
## Showcase
<img width="1277" alt="image"
src="https://github.com/user-attachments/assets/e9dc0105-4fb6-463f-ad53-0529b575fd28"
/>
## Notes
More docs to explain what is going on is still needed but the example
works and can already help some people.
We might want to consider using a batched phase and cold specialization
in the future, but the example is already complex enough as it is.
---------
Co-authored-by: Christopher Biscardi <chris@christopherbiscardi.com>
# Objective
- I was getting familiar with the many_components example to test some
recent pr's for executor changes and saw some things to improve.
## Solution
- Use `insert_by_ids` instead of `insert_by_id`. This reduces the number
of archetype moves and improves startup times substantially.
- Add a tracing span to `base_system`. I'm not sure why, but tracing
spans weren't showing for this system. I think it's something to do with
how pipe system works, but need to investigate more. The approach in
this pr is a little better than the default span too, since it allows
adding the number of entities queried to the span which is not possible
with the default system span.
- println the number of archetype component id's that are created. This
is useful since part of the purpose of this stress test is to test how
well the use of FixedBitSet scales in the executor.
## Testing
- Ran the example with `cargo run --example many_components -F
trace_tracy 1000000` and connected with tracy
- Timed the time it took to spawn 1 million entities on main (240 s) vs
this pr (15 s)
---
## Showcase
## Future Work
- Currently systems are created with a random set of components and
entities are created with a random set of components without any
correlation between the randomness. This means that some systems won't
match any entities and some entities could not match any systems. It
might be better to spawn the entities from the pool of components that
match the queries that the systems are using.
This pr uses the `extern crate self as` trick to make proc macros behave
the same way inside and outside bevy.
# Objective
- Removes noise introduced by `crate as` in the whole bevy repo.
- Fixes#17004.
- Hardens proc macro path resolution.
## TODO
- [x] `BevyManifest` needs cleanup.
- [x] Cleanup remaining `crate as`.
- [x] Add proper integration tests to the ci.
## Notes
- `cargo-manifest-proc-macros` is written by me and based/inspired by
the old `BevyManifest` implementation and
[`bkchr/proc-macro-crate`](https://github.com/bkchr/proc-macro-crate).
- What do you think about the new integration test machinery I added to
the `ci`?
More and better integration tests can be added at a later stage.
The goal of these integration tests is to simulate an actual separate
crate that uses bevy. Ideally they would lightly touch all bevy crates.
## Testing
- Needs RA test
- Needs testing from other users
- Others need to run at least `cargo run -p ci integration-test` and
verify that they work.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Didn't remove WgpuWrapper. Not sure if it's needed or not still.
## Testing
- Did you test these changes? If so, how? Example runner
- Are there any parts that need more testing? Web (portable atomics
thingy?), DXC.
## Migration Guide
- Bevy has upgraded to [wgpu
v24](https://github.com/gfx-rs/wgpu/blob/trunk/CHANGELOG.md#v2400-2025-01-15).
- When using the DirectX 12 rendering backend, the new priority system
for choosing a shader compiler is as follows:
- If the `WGPU_DX12_COMPILER` environment variable is set at runtime, it
is used
- Else if the new `statically-linked-dxc` feature is enabled, a custom
version of DXC will be statically linked into your app at compile time.
- Else Bevy will look in the app's working directory for
`dxcompiler.dll` and `dxil.dll` at runtime.
- Else if they are missing, Bevy will fall back to FXC (not recommended)
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IceSentry <c.giguere42@gmail.com>
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
The entity disabling / default query filter work added in #17514 and
#13120 is neat, but we don't teach users how it works!
We should fix that before 0.16.
## Solution
Write a simple example to teach the basics of entity disabling!
## Testing
`cargo run --example entity_disabling`
## Showcase
---------
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
The bounding_2d example was originally placed in 2d_rendering because
there was no folder for bounding or math, but now that this folder exist
it makes no sense for it to be here.
## Solution
Move the example
## Testing
I ran the example
*Occlusion culling* allows the GPU to skip the vertex and fragment
shading overhead for objects that can be quickly proved to be invisible
because they're behind other geometry. A depth prepass already
eliminates most fragment shading overhead for occluded objects, but the
vertex shading overhead, as well as the cost of testing and rejecting
fragments against the Z-buffer, is presently unavoidable for standard
meshes. We currently perform occlusion culling only for meshlets. But
other meshes, such as skinned meshes, can benefit from occlusion culling
too in order to avoid the transform and skinning overhead for unseen
meshes.
This commit adapts the same [*two-phase occlusion culling*] technique
that meshlets use to Bevy's standard 3D mesh pipeline when the new
`OcclusionCulling` component, as well as the `DepthPrepass` component,
are present on the camera. It has these steps:
1. *Early depth prepass*: We use the hierarchical Z-buffer from the
previous frame to cull meshes for the initial depth prepass, effectively
rendering only the meshes that were visible in the last frame.
2. *Early depth downsample*: We downsample the depth buffer to create
another hierarchical Z-buffer, this time with the current view
transform.
3. *Late depth prepass*: We use the new hierarchical Z-buffer to test
all meshes that weren't rendered in the early depth prepass. Any meshes
that pass this check are rendered.
4. *Late depth downsample*: Again, we downsample the depth buffer to
create a hierarchical Z-buffer in preparation for the early depth
prepass of the next frame. This step is done after all the rendering, in
order to account for custom phase items that might write to the depth
buffer.
Note that this patch has no effect on the per-mesh CPU overhead for
occluded objects, which remains high for a GPU-driven renderer due to
the lack of `cold-specialization` and retained bins. If
`cold-specialization` and retained bins weren't on the horizon, then a
more traditional approach like potentially visible sets (PVS) or low-res
CPU rendering would probably be more efficient than the GPU-driven
approach that this patch implements for most scenes. However, at this
point the amount of effort required to implement a PVS baking tool or a
low-res CPU renderer would probably be greater than landing
`cold-specialization` and retained bins, and the GPU driven approach is
the more modern one anyway. It does mean that the performance
improvements from occlusion culling as implemented in this patch *today*
are likely to be limited, because of the high CPU overhead for occluded
meshes.
Note also that this patch currently doesn't implement occlusion culling
for 2D objects or shadow maps. Those can be addressed in a follow-up.
Additionally, note that the techniques in this patch require compute
shaders, which excludes support for WebGL 2.
This PR is marked experimental because of known precision issues with
the downsampling approach when applied to non-power-of-two framebuffer
sizes (i.e. most of them). These precision issues can, in rare cases,
cause objects to be judged occluded that in fact are not. (I've never
seen this in practice, but I know it's possible; it tends to be likelier
to happen with small meshes.) As a follow-up to this patch, we desire to
switch to the [SPD-based hi-Z buffer shader from the Granite engine],
which doesn't suffer from these problems, at which point we should be
able to graduate this feature from experimental status. I opted not to
include that rewrite in this patch for two reasons: (1) @JMS55 is
planning on doing the rewrite to coincide with the new availability of
image atomic operations in Naga; (2) to reduce the scope of this patch.
A new example, `occlusion_culling`, has been added. It demonstrates
objects becoming quickly occluded and disoccluded by dynamic geometry
and shows the number of objects that are actually being rendered. Also,
a new `--occlusion-culling` switch has been added to `scene_viewer`, in
order to make it easy to test this patch with large scenes like Bistro.
[*two-phase occlusion culling*]:
https://medium.com/@mil_kru/two-pass-occlusion-culling-4100edcad501
[Aaltonen SIGGRAPH 2015]:
https://www.advances.realtimerendering.com/s2015/aaltonenhaar_siggraph2015_combined_final_footer_220dpi.pdf
[Some literature]:
https://gist.github.com/reduz/c5769d0e705d8ab7ac187d63be0099b5?permalink_comment_id=5040452#gistcomment-5040452
[SPD-based hi-Z buffer shader from the Granite engine]:
https://github.com/Themaister/Granite/blob/master/assets/shaders/post/hiz.comp
## Migration guide
* When enqueuing a custom mesh pipeline, work item buffers are now
created with
`bevy::render::batching::gpu_preprocessing::get_or_create_work_item_buffer`,
not `PreprocessWorkItemBuffers::new`. See the
`specialized_mesh_pipeline` example.
## Showcase
Occlusion culling example:
Bistro zoomed out, before occlusion culling:
Bistro zoomed out, after occlusion culling:
In this scene, occlusion culling reduces the number of meshes Bevy has
to render from 1591 to 585.
This commit allows specular highlights to be tinted with a color and for
the reflectance and color tint values to vary across a model via a pair
of maps. The implementation follows the [`KHR_materials_specular`] glTF
extension. In order to reduce the number of samplers and textures in the
default `StandardMaterial` configuration, the maps are gated behind the
`pbr_specular_textures` Cargo feature.
Specular tinting is currently unsupported in the deferred renderer,
because I didn't want to bloat the deferred G-buffers. A possible fix
for this in the future would be to make the G-buffer layout more
configurable, so that specular tints could be supported on an opt-in
basis. As an alternative, Bevy could force meshes with specular tints to
render in forward mode. Both of these solutions require some more
design, so I consider them out of scope for now.
Note that the map is a *specular* map, not a *reflectance* map. In Bevy
and Filament terms, the reflectance values in the specular map range
from [0.0, 0.5], rather than [0.0, 1.0]. This is an unfortunate
[`KHR_materials_specular`] specification requirement that stems from the
fact that glTF is specified in terms of a specular strength model, not
the reflectance model that Filament and Bevy use. A workaround, which is
noted in the `StandardMaterial` documentation, is to set the
`reflectance` value to 2.0, which spreads the specular map range from
[0.0, 1.0] as normal.
The glTF loader has been updated to parse the [`KHR_materials_specular`]
extension. Note that, unless the non-default `pbr_specular_textures` is
supplied, the maps are ignored. The `specularFactor` value is applied as
usual. Note that, as with the specular map, the glTF `specularFactor` is
twice Bevy's `reflectance` value.
This PR adds a new example, `specular_tint`, which demonstrates the
specular tint and map features. Note that this example requires the
[`KHR_materials_specular`] Cargo feature.
[`KHR_materials_specular`]:
https://github.com/KhronosGroup/glTF/tree/main/extensions/2.0/Khronos/KHR_materials_specular
## Changelog
### Added
* Specular highlights can now be tinted with the `specular_tint` field
in `StandardMaterial`.
* Specular maps are now available in `StandardMaterial`, gated behind
the `pbr_specular_textures` Cargo feature.
* The `KHR_materials_specular` glTF extension is now supported, allowing
for customization of specular reflectance and specular maps. Note that
the latter are gated behind the `pbr_specular_textures` Cargo feature.
This commit adds support for *decal projectors* to Bevy, allowing for
textures to be projected on top of geometry. Decal projectors are
clusterable objects, just as punctual lights and light probes are. This
means that decals are only evaluated for objects within the conservative
bounds of the projector, and they don't require a second pass.
These clustered decals require support for bindless textures and as such
currently don't work on WebGL 2, WebGPU, macOS, or iOS. For an
alternative that doesn't require bindless, see PR #16600. I believe that
both contact projective decals in #16600 and clustered decals are
desirable to have in Bevy. Contact projective decals offer broader
hardware and driver support, while clustered decals don't require the
creation of bounding geometry.
A new example, `decal_projectors`, has been added, which demonstrates
multiple decals on a rotating object. The decal projectors can be scaled
and rotated with the mouse.
There are several limitations of this initial patch that can be
addressed in follow-ups:
1. There's no way to specify the Z-index of decals. That is, the order
in which multiple decals are blended on top of one another is arbitrary.
A follow-up could introduce some sort of Z-index field so that artists
can specify that some decals should be blended on top of others.
2. Decals don't take the normal of the surface they're projected onto
into account. Most decal implementations in other engines have a feature
whereby the angle between the decal projector and the normal of the
surface must be within some threshold for the decal to appear. Often,
artists can specify a fade-off range for a smooth transition between
oblique surfaces and aligned surfaces.
3. There's no distance-based fadeoff toward the end of the projector
range. Many decal implementations have this.
This addresses #2401.
## Showcase
# Objective
Bevy sprite image mode lacks proportional scaling for the underlying
texture. In many cases, it's required. For example, if it is desired to
support a wide variety of screens with a single texture, it's okay to
cut off some portion of the original texture.
## Solution
I added scaling of the texture during the preparation step. To fill the
sprite with the original texture, I scaled UV coordinates accordingly to
the sprite size aspect ratio and texture size aspect ratio. To fit
texture in a sprite the original `quad` is scaled and then the
additional translation is applied to place the scaled quad properly.
## Testing
For testing purposes could be used `2d/sprite_scale.rs`. Also, I am
thinking that it would be nice to have some tests for a
`crates/bevy_sprite/src/render/mod.rs:sprite_scale`.
---
## Showcase
<img width="1392" alt="image"
src="https://github.com/user-attachments/assets/c2c37b96-2493-4717-825f-7810d921b4bc"
/>
# Objective
- This PR adds a new stress test called `many_materials` to benchmark
the rendering performance of many animated materials.
- Fixes#11588
- This PR continues the work started in the previous PR #11592, which
was closed due to inactivity.
## Solution
- Created a new example (`examples/stress_tests/many_materials.rs`) that
renders a grid of cubes with animated materials.
- The size of the grid can be configured using the `-n` command-line
argument (or `--grid-size`). The default grid size is 10x10.
- The materials animate by cycling through colors in the HSL color
space.
## Testing
- I have tested these changes locally on my Linux machine.
- Reviewers can test the changes by running the example with different
grid sizes and observing the performance (FPS, frame time).
- I have not tested on other platforms (macOS, Windows, wasm), but I
expect it to work as the code uses standard Bevy features.
---
## Showcase
<details>
<summary>Click to view showcase</summary>
</details>
Implement procedural atmospheric scattering from [Sebastien Hillaire's
2020 paper](https://sebh.github.io/publications/egsr2020.pdf). This
approach should scale well even down to mobile hardware, and is
physically accurate.
## Co-author: @mate-h
He helped massively with getting this over the finish line, ensuring
everything was physically correct, correcting several places where I had
misunderstood or misapplied the paper, and improving the performance in
several places as well. Thanks!
## Credits
@aevyrie: helped find numerous bugs and improve the example to best show
off this feature :)
Built off of @mtsr's original branch, which handled the transmittance
lut (arguably the most important part)
## Showcase:
## For followup
- Integrate with pcwalton's volumetrics code
- refactor/reorganize for better integration with other effects
- have atmosphere transmittance affect directional lights
- add support for generating skybox/environment map
---------
Co-authored-by: Emerson Coskey <56370779+EmersonCoskey@users.noreply.github.com>
Co-authored-by: atlv <email@atlasdostal.com>
Co-authored-by: JMS55 <47158642+JMS55@users.noreply.github.com>
Co-authored-by: Emerson Coskey <coskey@emerlabs.net>
Co-authored-by: Máté Homolya <mate.homolya@gmail.com>
# Objective
After #17398, Bevy now has relations! We don't teach users how to make /
work with these in the examples yet though, but we definitely should.
## Solution
- Add a simple abstract example that goes over defining, spawning,
traversing and removing a custom relations.
- ~~Add `Relationship` and `RelationshipTarget` to the prelude: the
trait methods are really helpful here.~~
- this causes subtle ambiguities with method names and weird compiler
errors. Not doing it here!
- Clean up related documentation that I referenced when writing this
example.
## Testing
`cargo run --example relationships`
## Notes to reviewers
1. Yes, I know that the cycle detection code could be more efficient. I
decided to reduce the caching to avoid distracting from the broader
point of "here's how you traverse relationships".
2. Instead of using an `App`, I've decide to use
`World::run_system_once` + system functions defined inside of `main` to
do something closer to literate programming.
---------
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
Co-authored-by: MinerSebas <66798382+MinerSebas@users.noreply.github.com>
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
Added an external assets section to .gitignore. This prevents
contributors from accidentally adding or committing them.
I believe currently the only externel asset is the meshlet bunny.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/17111
## Solution
Move `#![warn(clippy::allow_attributes,
clippy::allow_attributes_without_reason)]` to the workspace `Cargo.toml`
## Testing
Lots of CI testing, and local testing too.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
- Bevy 0.15 added support for custom cursor images in
https://github.com/bevyengine/bevy/pull/14284.
- However, to do animated cursors using the initial support shipped in
0.15 means you'd have to animate the `Handle<Image>`: You can't use a
`TextureAtlas` like you can with sprites and UI images.
- For my use case, my cursors are spritesheets. To animate them, I'd
have to break them down into multiple `Image` assets, but that seems
less than ideal.
## Solution
- Allow users to specify a `TextureAtlas` field when creating a custom
cursor image.
- To create parity with Bevy's `TextureAtlas` support on `Sprite`s and
`ImageNode`s, this also allows users to specify `rect`, `flip_x` and
`flip_y`. In fact, for my own use case, I need to `flip_y`.
## Testing
- I added unit tests for `calculate_effective_rect` and
`extract_and_transform_rgba_pixels`.
- I added a brand new example for custom cursor images. It has controls
to toggle fields on and off. I opted to add a new example because the
existing cursor example (`window_settings`) would be far too messy for
showcasing these custom cursor features (I did start down that path but
decided to stop and make a brand new example).
- The new example uses a [Kenny cursor icon] sprite sheet. I included
the licence even though it's not required (and it's CC0).
- I decided to make the example just loop through all cursor icons for
its animation even though it's not a _realistic_ in-game animation
sequence.
- I ran the PNG through https://tinypng.com. Looks like it's about 35KB.
- I'm open to adjusting the example spritesheet if required, but if it's
fine as is, great.
[Kenny cursor icon]: https://kenney-assets.itch.io/crosshair-pack
---
## Showcase
https://github.com/user-attachments/assets/8f6be8d7-d1d4-42f9-b769-ef8532367749
## Migration Guide
The `CustomCursor::Image` enum variant has some new fields. Update your
code to set them.
Before:
```rust
CustomCursor::Image {
handle: asset_server.load("branding/icon.png"),
hotspot: (128, 128),
}
```
After:
```rust
CustomCursor::Image {
handle: asset_server.load("branding/icon.png"),
texture_atlas: None,
flip_x: false,
flip_y: false,
rect: None,
hotspot: (128, 128),
}
```
## References
- Feature request [originally raised in Discord].
[originally raised in Discord]:
https://discord.com/channels/691052431525675048/692572690833473578/1319836362219847681
# Objective
Building upon https://github.com/bevyengine/bevy/pull/17191, improve the
`animated_mesh` example by removing code, adding comments, and making
the example more c&p'able.
## Solution
- Split the setup function in two to clarify what the example is
demonstrating.
- `setup_mesh_and_animation` is the demonstration.
- `setup_camera_and_environment` just sets up the example app.
- Changed the animation playing to use `AnimationPlayer` directly
instead of creating `AnimationTransitions`.
- This appears sufficient when only playing a single animation.
- Added a comment pointing users to an example of multiple animations.
- Changed the animation to be the run cycle.
- I think it got accidentally changed to the idle in
[#17191](https://github.com/bevyengine/bevy/pull/17191), so this is
reverting back to the original.
- Note that we can improve it to select the animation by name if
[#16529](https://github.com/bevyengine/bevy/pull/16529) lands.
- Renamed `FOX_PATH` to a more neutral `GLTF_PATH`.
- Updated the example descriptions to mention the fox.
- This adds a little character and hints that the example involves
character animation.
- Removed a seemingly redundant `AnimationGraphHandle` component.
- Removed an unnecessary `clone()`.
- Added various comments.
## Notes
- A draft of this PR was discussed on Discord:
https://discord.com/channels/691052431525675048/1326910663972618302/1326920498663133348
- There was discord discussion on whether a component is "inserted
onto", "inserted into" or "added to" an entity.
- "Added to" is most common in code and docs, and seems best to me. But
it awkwardly differs from the name of `EntityCommands::insert`.
- This PR prefers "added to".
- I plan to follow up this PR with similar changes to the
`animated_mesh_control` and `animated_mesh_events` examples.
- But I could roll them into this PR if requested.
## Testing
`cargo run --example animated_mesh`
---------
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
Gamepad / directional navigation needs an example, for both teaching and
testing purposes.
## Solution
- Add a simple grid-based example.
- Fix an intermittent panic caused by a race condition with bevy_a11y
- Clean up small issues noticed in bevy_input_focus
## To do: this PR
- [x] figure out why "enter" isn't doing anything
- [x] change button color on interaction rather than printing
- [x] add on-screen directions
- [x] move to an asymmetric grid to catch bugs
- [x] ~~fix colors not resetting on button press~~ lol this is mostly
just a problem with hacking `Interaction` for this
- [x] swap to using observers + bubbling, rather than `Interaction`
## To do: future work
- when I increase the button size, such that there is no line break, the
text on the buttons is no longer centered :( EDIT: this is
https://github.com/bevyengine/bevy/issues/16783
- add gamepad stick navigation
- add tools to find the nearest populated quadrant to make diagonal
inputs work
- add a `add_edges` method to `DirectionalNavigationMap`
- add a `add_grid` method to `DirectionalNavigationMap`
- make the example's layout more complex and realistic
- add tools to automatically generate this list
- add button shake on failed navigation rather than printing an error
- make Pressed events easier to mock: default fields, PointerId::Focus
## Testing
`cargo run --example directional_navigation`
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
Many instances of `clippy::too_many_arguments` linting happen to be on
systems - functions which we don't call manually, and thus there's not
much reason to worry about the argument count.
## Solution
Allow `clippy::too_many_arguments` globally, and remove all lint
attributes related to it.
