# Objective
Correct spelling
## Solution
Fix typos, specifically ones that I found in folders other than /crates
## Testing
CI
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- #16883
- Improve the default behaviour of the exclusive fullscreen API.
## Solution
This PR changes the exclusive fullscreen window mode to require the type
`WindowMode::Fullscreen(MonitorSelection, VideoModeSelection)` and
removes `WindowMode::SizedFullscreen`. This API somewhat intentionally
more closely resembles Winit 0.31's upcoming fullscreen and video mode
API.
The new VideoModeSelection enum is specified as follows:
```rust
pub enum VideoModeSelection {
/// Uses the video mode that the monitor is already in.
Current,
/// Uses a given [`crate::monitor::VideoMode`]. A list of video modes supported by the monitor
/// is supplied by [`crate::monitor::Monitor::video_modes`].
Specific(VideoMode),
}
```
### Changing default behaviour
This might be contentious because it removes the previous behaviour of
`WindowMode::Fullscreen` which selected the highest resolution possible.
While the previous behaviour would be quite easy to re-implement as
additional options, or as an impl method on Monitor, I would argue that
this isn't an implementation that should be encouraged.
From the perspective of a Windows user, I prefer what the majority of
modern games do when entering fullscreen which is to preserve the OS's
current resolution settings, which allows exclusive fullscreen to be
entered faster, and to only have it change if I manually select it in
either the options of the game or the OS. The highest resolution
available is not necessarily what the user prefers.
I am open to changing this if I have just missed a good use case for it.
Likewise, the only functionality that `WindowMode::SizedFullscreen`
provided was that it selected the resolution closest to the current size
of the window so it was removed since this behaviour can be replicated
via the new `VideoModeSelection::Specific` if necessary.
## Out of scope
WindowResolution and scale factor act strangely in exclusive fullscreen,
this PR doesn't address it or regress it.
## Testing
- Tested on Windows 11 and macOS 12.7
- Linux untested
## Migration Guide
`WindowMode::SizedFullscreen(MonitorSelection)` and
`WindowMode::Fullscreen(MonitorSelection)` has become
`WindowMode::Fullscreen(MonitorSelection, VideoModeSelection)`.
Previously, the VideoMode was selected based on the closest resolution
to the current window size for SizedFullscreen and the largest
resolution for Fullscreen. It is possible to replicate that behaviour by
searching `Monitor::video_modes` and selecting it with
`VideoModeSelection::Specific(VideoMode)` but it is recommended to use
`VideoModeSelection::Current` as the default video mode when entering
fullscreen.
Update the documentation comment to correctly state that the function
responds to spacebar presses rather than mouse clicks. This aligns the
documentation with the actual implementation, which was already using
keyboard input.
# Objective
- Fix incorrect documentation comment for the cycle_modes function that
inaccurately described using mouse input when the implementation
actually uses spacebar.
- This ensures documentation accuracy and prevents confusion for new
learners.
## Solution
- Updated the documentation comment to correctly state that the function
responds to spacebar presses rather than mouse clicks.
- The code functionality remains unchanged.
# Objective
`extract_text_shadows` was still using `UiTargetCamera` and
`DefaultUiCamera` for UI camera resolution, which no longer always
selects the right camera.
To see this modify the last lines of the `multiple_windows` example
from:
```rust
commands.spawn((
Text::new("First window"),
node.clone(),
// Since we are using multiple cameras, we need to specify which camera UI should be rendered to
UiTargetCamera(first_window_camera),
));
commands.spawn((
Text::new("Second window"),
node,
UiTargetCamera(second_window_camera),
));
```
to:
```rust
commands
.spawn((
node.clone(),
// Since we are using multiple cameras, we need to specify which camera UI should be rendered to
UiTargetCamera(first_window_camera),
))
.with_child((Text::new("First window"), TextShadow::default()));
commands
.spawn((node, UiTargetCamera(second_window_camera)))
.with_child((Text::new("Second window"), TextShadow::default()));
```
which results in the shadow that is meant to be displayed for the
"Second Window" label instead being written over the first:
<img width="800" alt="first_window_label"
src="https://github.com/user-attachments/assets/2eebccba-5749-4064-bb1c-e4f25ff0baf7">
## Solution
Remove the `UiTargetCamera` query and the `default_camera` parameter
from `extract_text_shadows` and use `UiCameraMap` with
`ComputedNodeTarget` instead.
## Testing
The `multiple_windows` example for this PR has been updated to add text
shadow to the window labels. You should see that it displays the "Second
Window" label's shadow correctly now.
# Objective
As discussed in #14275, Bevy is currently too prone to panic, and makes
the easy / beginner-friendly way to do a large number of operations just
to panic on failure.
This is seriously frustrating in library code, but also slows down
development, as many of the `Query::single` panics can actually safely
be an early return (these panics are often due to a small ordering issue
or a change in game state.
More critically, in most "finished" products, panics are unacceptable:
any unexpected failures should be handled elsewhere. That's where the
new
With the advent of good system error handling, we can now remove this.
Note: I was instrumental in a) introducing this idea in the first place
and b) pushing to make the panicking variant the default. The
introduction of both `let else` statements in Rust and the fancy system
error handling work in 0.16 have changed my mind on the right balance
here.
## Solution
1. Make `Query::single` and `Query::single_mut` (and other random
related methods) return a `Result`.
2. Handle all of Bevy's internal usage of these APIs.
3. Deprecate `Query::get_single` and friends, since we've moved their
functionality to the nice names.
4. Add detailed advice on how to best handle these errors.
Generally I like the diff here, although `get_single().unwrap()` in
tests is a bit of a downgrade.
## Testing
I've done a global search for `.single` to track down any missed
deprecated usages.
As to whether or not all the migrations were successful, that's what CI
is for :)
## Future work
~~Rename `Query::get_single` and friends to `Query::single`!~~
~~I've opted not to do this in this PR, and smear it across two releases
in order to ease the migration. Successive deprecations are much easier
to manage than the semantics and types shifting under your feet.~~
Cart has convinced me to change my mind on this; see
https://github.com/bevyengine/bevy/pull/18082#discussion_r1974536085.
## Migration guide
`Query::single`, `Query::single_mut` and their `QueryState` equivalents
now return a `Result`. Generally, you'll want to:
1. Use Bevy 0.16's system error handling to return a `Result` using the
`?` operator.
2. Use a `let else Ok(data)` block to early return if it's an expected
failure.
3. Use `unwrap()` or `Ok` destructuring inside of tests.
The old `Query::get_single` (etc) methods which did this have been
deprecated.
Fixes#17856.
## Migration Guide
- `EventWriter::send` has been renamed to `EventWriter::write`.
- `EventWriter::send_batch` has been renamed to
`EventWriter::write_batch`.
- `EventWriter::send_default` has been renamed to
`EventWriter::write_default`.
---------
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
- Make `CustomCursor::Image` easier to work with by splitting the enum
variants off into `CustomCursorImage` and `CustomCursorUrl` structs and
deriving `Default` on those structs.
- Refs #17276.
## Testing
- Ran two examples: `cargo run --example custom_cursor_image
--features=custom_cursor` and `cargo run --example window_settings
--features=custom_cursor`
- CI.
---
## Migration Guide
The `CustomCursor` enum's variants now hold instances of
`CustomCursorImage` or `CustomCursorUrl`. Update your uses of
`CustomCursor` accordingly.
# Objective
It's not immediately obvious that `TargetCamera` only works with UI node
entities. It's natural to assume from looking at something like the
`multiple_windows` example that it will work with everything.
## Solution
Rename `TargetCamera` to `UiTargetCamera`.
## Migration Guide
`TargetCamera` has been renamed to `UiTargetCamera`.
This adds support for one-to-many non-fragmenting relationships (with
planned paths for fragmenting and non-fragmenting many-to-many
relationships). "Non-fragmenting" means that entities with the same
relationship type, but different relationship targets, are not forced
into separate tables (which would cause "table fragmentation").
Functionally, this fills a similar niche as the current Parent/Children
system. The biggest differences are:
1. Relationships have simpler internals and significantly improved
performance and UX. Commands and specialized APIs are no longer
necessary to keep everything in sync. Just spawn entities with the
relationship components you want and everything "just works".
2. Relationships are generalized. Bevy can provide additional built in
relationships, and users can define their own.
**REQUEST TO REVIEWERS**: _please don't leave top level comments and
instead comment on specific lines of code. That way we can take
advantage of threaded discussions. Also dont leave comments simply
pointing out CI failures as I can read those just fine._
## Built on top of what we have
Relationships are implemented on top of the Bevy ECS features we already
have: components, immutability, and hooks. This makes them immediately
compatible with all of our existing (and future) APIs for querying,
spawning, removing, scenes, reflection, etc. The fewer specialized APIs
we need to build, maintain, and teach, the better.
## Why focus on one-to-many non-fragmenting first?
1. This allows us to improve Parent/Children relationships immediately,
in a way that is reasonably uncontroversial. Switching our hierarchy to
fragmenting relationships would have significant performance
implications. ~~Flecs is heavily considering a switch to non-fragmenting
relations after careful considerations of the performance tradeoffs.~~
_(Correction from @SanderMertens: Flecs is implementing non-fragmenting
storage specialized for asset hierarchies, where asset hierarchies are
many instances of small trees that have a well defined structure)_
2. Adding generalized one-to-many relationships is currently a priority
for the [Next Generation Scene / UI
effort](https://github.com/bevyengine/bevy/discussions/14437).
Specifically, we're interested in building reactions and observers on
top.
## The changes
This PR does the following:
1. Adds a generic one-to-many Relationship system
3. Ports the existing Parent/Children system to Relationships, which now
lives in `bevy_ecs::hierarchy`. The old `bevy_hierarchy` crate has been
removed.
4. Adds on_despawn component hooks
5. Relationships can opt-in to "despawn descendants" behavior, meaning
that the entire relationship hierarchy is despawned when
`entity.despawn()` is called. The built in Parent/Children hierarchies
enable this behavior, and `entity.despawn_recursive()` has been removed.
6. `world.spawn` now applies commands after spawning. This ensures that
relationship bookkeeping happens immediately and removes the need to
manually flush. This is in line with the equivalent behaviors recently
added to the other APIs (ex: insert).
7. Removes the ValidParentCheckPlugin (system-driven / poll based) in
favor of a `validate_parent_has_component` hook.
## Using Relationships
The `Relationship` trait looks like this:
```rust
pub trait Relationship: Component + Sized {
type RelationshipSources: RelationshipSources<Relationship = Self>;
fn get(&self) -> Entity;
fn from(entity: Entity) -> Self;
}
```
A relationship is a component that:
1. Is a simple wrapper over a "target" Entity.
2. Has a corresponding `RelationshipSources` component, which is a
simple wrapper over a collection of entities. Every "target entity"
targeted by a "source entity" with a `Relationship` has a
`RelationshipSources` component, which contains every "source entity"
that targets it.
For example, the `Parent` component (as it currently exists in Bevy) is
the `Relationship` component and the entity containing the Parent is the
"source entity". The entity _inside_ the `Parent(Entity)` component is
the "target entity". And that target entity has a `Children` component
(which implements `RelationshipSources`).
In practice, the Parent/Children relationship looks like this:
```rust
#[derive(Relationship)]
#[relationship(relationship_sources = Children)]
pub struct Parent(pub Entity);
#[derive(RelationshipSources)]
#[relationship_sources(relationship = Parent)]
pub struct Children(Vec<Entity>);
```
The Relationship and RelationshipSources derives automatically implement
Component with the relevant configuration (namely, the hooks necessary
to keep everything in sync).
The most direct way to add relationships is to spawn entities with
relationship components:
```rust
let a = world.spawn_empty().id();
let b = world.spawn(Parent(a)).id();
assert_eq!(world.entity(a).get::<Children>().unwrap(), &[b]);
```
There are also convenience APIs for spawning more than one entity with
the same relationship:
```rust
world.spawn_empty().with_related::<Children>(|s| {
s.spawn_empty();
s.spawn_empty();
})
```
The existing `with_children` API is now a simpler wrapper over
`with_related`. This makes this change largely non-breaking for existing
spawn patterns.
```rust
world.spawn_empty().with_children(|s| {
s.spawn_empty();
s.spawn_empty();
})
```
There are also other relationship APIs, such as `add_related` and
`despawn_related`.
## Automatic recursive despawn via the new on_despawn hook
`RelationshipSources` can opt-in to "despawn descendants" behavior,
which will despawn all related entities in the relationship hierarchy:
```rust
#[derive(RelationshipSources)]
#[relationship_sources(relationship = Parent, despawn_descendants)]
pub struct Children(Vec<Entity>);
```
This means that `entity.despawn_recursive()` is no longer required.
Instead, just use `entity.despawn()` and the relevant related entities
will also be despawned.
To despawn an entity _without_ despawning its parent/child descendants,
you should remove the `Children` component first, which will also remove
the related `Parent` components:
```rust
entity
.remove::<Children>()
.despawn()
```
This builds on the on_despawn hook introduced in this PR, which is fired
when an entity is despawned (before other hooks).
## Relationships are the source of truth
`Relationship` is the _single_ source of truth component.
`RelationshipSources` is merely a reflection of what all the
`Relationship` components say. By embracing this, we are able to
significantly improve the performance of the system as a whole. We can
rely on component lifecycles to protect us against duplicates, rather
than needing to scan at runtime to ensure entities don't already exist
(which results in quadratic runtime). A single source of truth gives us
constant-time inserts. This does mean that we cannot directly spawn
populated `Children` components (or directly add or remove entities from
those components). I personally think this is a worthwhile tradeoff,
both because it makes the performance much better _and_ because it means
theres exactly one way to do things (which is a philosophy we try to
employ for Bevy APIs).
As an aside: treating both sides of the relationship as "equivalent
source of truth relations" does enable building simple and flexible
many-to-many relationships. But this introduces an _inherent_ need to
scan (or hash) to protect against duplicates.
[`evergreen_relations`](https://github.com/EvergreenNest/evergreen_relations)
has a very nice implementation of the "symmetrical many-to-many"
approach. Unfortunately I think the performance issues inherent to that
approach make it a poor choice for Bevy's default relationship system.
## Followup Work
* Discuss renaming `Parent` to `ChildOf`. I refrained from doing that in
this PR to keep the diff reasonable, but I'm personally biased toward
this change (and using that naming pattern generally for relationships).
* [Improved spawning
ergonomics](https://github.com/bevyengine/bevy/discussions/16920)
* Consider adding relationship observers/triggers for "relationship
targets" whenever a source is added or removed. This would replace the
current "hierarchy events" system, which is unused upstream but may have
existing users downstream. I think triggers are the better fit for this
than a buffered event queue, and would prefer not to add that back.
* Fragmenting relations: My current idea hinges on the introduction of
"value components" (aka: components whose type _and_ value determines
their ComponentId, via something like Hashing / PartialEq). By labeling
a Relationship component such as `ChildOf(Entity)` as a "value
component", `ChildOf(e1)` and `ChildOf(e2)` would be considered
"different components". This makes the transition between fragmenting
and non-fragmenting a single flag, and everything else continues to work
as expected.
* Many-to-many support
* Non-fragmenting: We can expand Relationship to be a list of entities
instead of a single entity. I have largely already written the code for
this.
* Fragmenting: With the "value component" impl mentioned above, we get
many-to-many support "for free", as it would allow inserting multiple
copies of a Relationship component with different target entities.
Fixes#3742 (If this PR is merged, I think we should open more targeted
followup issues for the work above, with a fresh tracking issue free of
the large amount of less-directed historical context)
Fixes#17301Fixes#12235Fixes#15299Fixes#15308
## Migration Guide
* Replace `ChildBuilder` with `ChildSpawnerCommands`.
* Replace calls to `.set_parent(parent_id)` with
`.insert(Parent(parent_id))`.
* Replace calls to `.replace_children()` with `.remove::<Children>()`
followed by `.add_children()`. Note that you'll need to manually despawn
any children that are not carried over.
* Replace calls to `.despawn_recursive()` with `.despawn()`.
* Replace calls to `.despawn_descendants()` with
`.despawn_related::<Children>()`.
* If you have any calls to `.despawn()` which depend on the children
being preserved, you'll need to remove the `Children` component first.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Bevy 0.15 added support for custom cursor images in
https://github.com/bevyengine/bevy/pull/14284.
- However, to do animated cursors using the initial support shipped in
0.15 means you'd have to animate the `Handle<Image>`: You can't use a
`TextureAtlas` like you can with sprites and UI images.
- For my use case, my cursors are spritesheets. To animate them, I'd
have to break them down into multiple `Image` assets, but that seems
less than ideal.
## Solution
- Allow users to specify a `TextureAtlas` field when creating a custom
cursor image.
- To create parity with Bevy's `TextureAtlas` support on `Sprite`s and
`ImageNode`s, this also allows users to specify `rect`, `flip_x` and
`flip_y`. In fact, for my own use case, I need to `flip_y`.
## Testing
- I added unit tests for `calculate_effective_rect` and
`extract_and_transform_rgba_pixels`.
- I added a brand new example for custom cursor images. It has controls
to toggle fields on and off. I opted to add a new example because the
existing cursor example (`window_settings`) would be far too messy for
showcasing these custom cursor features (I did start down that path but
decided to stop and make a brand new example).
- The new example uses a [Kenny cursor icon] sprite sheet. I included
the licence even though it's not required (and it's CC0).
- I decided to make the example just loop through all cursor icons for
its animation even though it's not a _realistic_ in-game animation
sequence.
- I ran the PNG through https://tinypng.com. Looks like it's about 35KB.
- I'm open to adjusting the example spritesheet if required, but if it's
fine as is, great.
[Kenny cursor icon]: https://kenney-assets.itch.io/crosshair-pack
---
## Showcase
https://github.com/user-attachments/assets/8f6be8d7-d1d4-42f9-b769-ef8532367749
## Migration Guide
The `CustomCursor::Image` enum variant has some new fields. Update your
code to set them.
Before:
```rust
CustomCursor::Image {
handle: asset_server.load("branding/icon.png"),
hotspot: (128, 128),
}
```
After:
```rust
CustomCursor::Image {
handle: asset_server.load("branding/icon.png"),
texture_atlas: None,
flip_x: false,
flip_y: false,
rect: None,
hotspot: (128, 128),
}
```
## References
- Feature request [originally raised in Discord].
[originally raised in Discord]:
https://discord.com/channels/691052431525675048/692572690833473578/1319836362219847681
# Objective
I have an application where I'd like to measure average frame rate over
the entire life of the application, and it would be handy if I could
just configure this on the existing `FrameTimeDiagnosticsPlugin`.
Probably fixes#10948?
## Solution
Add `max_history_length` to `FrameTimeDiagnosticsPlugin`, and because
`smoothing_factor` seems to be based on history length, add that too.
## Discussion
I'm not totally sure that `DEFAULT_MAX_HISTORY_LENGTH` is a great
default for `FrameTimeDiagnosticsPlugin` (or any diagnostic?). That's
1/3 of a second at typical game frame rates. Moreover, the default print
interval for `LogDiagnosticsPlugin` is 1 second. So when the two are
combined, you are printing the average over the last third of the
duration between now and the previous print, which seems a bit wonky.
(related: #11429)
I'm pretty sure this default value discussed and the current value
wasn't totally arbitrary though.
Maybe it would be nice for `Diagnostic` to have a
`with_max_history_length_and_also_calculate_a_good_default_smoothing_factor`
method? And then make an explicit smoothing factor in
`FrameTimeDiagnosticsPlugin` optional?
Or add a `new(max_history_length: usize)` method to
`FrameTimeDiagnosticsPlugin` that sets a reasonable default
`smoothing_factor`? edit: This one seems like a no-brainer, doing it.
## Alternatives
It's really easy to roll your own `FrameTimeDiagnosticsPlugin`, but that
might not be super interoperable with, for example, third party FPS
overlays. Still, might be the right call.
## Testing
`cargo run --example many_sprites` (modified to use a custom
`max_history_length`)
## Migration Guide
`FrameTimeDiagnosticsPlugin` now contains two fields. Use
`FrameTimeDiagnosticsPlugin::default()` to match Bevy's previous
behavior or, for example, `FrameTimeDiagnosticsPlugin::new(60)` to
configure it.
# Objective
Stumbled upon a `from <-> form` transposition while reviewing a PR,
thought it was interesting, and went down a bit of a rabbit hole.
## Solution
Fix em
# Objective
- Contributes to #11478
- Contributes to #16877
## Solution
- Removed everything except `Instant` from `bevy_utils::time`
## Testing
- CI
---
## Migration Guide
If you relied on any of the following from `bevy_utils::time`:
- `Duration`
- `TryFromFloatSecsError`
Import these directly from `core::time` regardless of platform target
(WASM, mobile, etc.)
If you relied on any of the following from `bevy_utils::time`:
- `SystemTime`
- `SystemTimeError`
Instead import these directly from either `std::time` or `web_time` as
appropriate for your target platform.
## Notes
`Duration` and `TryFromFloatSecsError` are both re-exports from
`core::time` regardless of whether they are used from `web_time` or
`std::time`, so there is no value gained from re-exporting them from
`bevy_utils::time` as well. As for `SystemTime` and `SystemTimeError`,
no Bevy internal crates or examples rely on these types. Since Bevy
doesn't have a `Time<Wall>` resource for interacting with wall-time (and
likely shouldn't need one), I think removing these from `bevy_utils`
entirely and waiting for a use-case to justify inclusion is a reasonable
path forward.
# Objective
- Fixes#16892
## Solution
- Removed `TypeRegistryPlugin` (`Name` is now automatically registered
with a default `App`)
- Moved `TaskPoolPlugin` to `bevy_app`
- Moved `FrameCountPlugin` to `bevy_diagnostic`
- Deleted now-empty `bevy_core`
## Testing
- CI
## Migration Guide
- `TypeRegistryPlugin` no longer exists. If you can't use a default
`App` but still need `Name` registered, do so manually with
`app.register_type::<Name>()`.
- References to `TaskPoolPlugin` and associated types will need to
import it from `bevy_app` instead of `bevy_core`
- References to `FrameCountPlugin` and associated types will need to
import it from `bevy_diagnostic` instead of `bevy_core`
## Notes
This strategy was agreed upon by Cart and several other members in
[Discord](https://discord.com/channels/691052431525675048/692572690833473578/1319137218312278077).
# Objective
Currently there's no way to change the window's cursor icon with the
`custom_cursor` feature **disabled**. You should still be able to set
system cursor icons.
Connections:
- https://github.com/bevyengine/bevy/pull/15649
## Solution
Move some `custom_cursor` feature gates around, as to expose the
`CursorIcon` type again.
Note this refactoring was mainly piloted by hunting after the compiler
warnings -- I shouldn't have missed anything, but FYI.
## Testing
Disabled the `custom_cursor` feature, ran the `window_settings` example.
# Objective
clean up example get_single method, make code clean;
## Solution
- replace `Query` with `Single` Query
- remove `get_single` or `get_single_mut` condition block
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
# Objective
Adjust instruction text in some newer examples to match the [example
visual
guidelines](https://bevyengine.org/learn/contribute/helping-out/creating-examples/#visual-guidelines).
## Solution
Move text 12px from edge of screen
## Testing
```
cargo run --example alter_mesh
cargo run --example alter_sprite
cargo run --example camera_orbit
cargo run --example projection_zoom
cargo run --example irradiance_volumes
cargo run --example log_layers_ecs
cargo run --example multi_asset_sync
cargo run --example multiple_windows
cargo run --example order_independent_transparency
```
## Additional information
This isn't comprehensive, just the most trivial cases. I'll double check
my notes and probably follow up with an issue to look into visual
guidelines for a few other examples.
Fixes#15834
## Migration Guide
The APIs of `Time`, `Timer` and `Stopwatch` have been cleaned up for
consistency with each other and the standard library's `Duration` type.
The following methods have been renamed:
- `Stowatch::paused` -> `Stopwatch::is_paused`
- `Time::elapsed_seconds` -> `Time::elasped_secs` (including `_f64` and
`_wrapped` variants)
# Objective
Add an example for the new drag move and drag resize introduced by PR
#15674 and fix#15734.
## Solution
I created an example that allows the user to exercise drag move and drag
resize separately. The user can also choose what direction the resize
works in.
### Name
The example is called `window_drag_move`. Happy to have that
bikeshedded.
### Contentious Refactor?
This PR removed the `ResizeDirection` enumeration in favor of using
`CompassOctant` which had the same variants. Perhaps this is
contentious.
### Unsafe?
In PR #15674 I mentioned that `start_drag_move()` and
`start_drag_resize()`'s requirement to only be called in the presence of
a left-click looks like a compiler-unenforceable contract that can cause
intermittent panics when not observed, so perhaps the functions should
be marked them unsafe. **I have not made that change** here since I
didn't see a clear consensus on that.
## Testing
I exercised this on x86 macOS. However, winit for macOS does not support
drag resize. It reports a good error when `start_drag_resize()` is
called. I'd like to see it tested on Windows and Linux.
---
## Showcase
Example window_drag_move shows how to drag or resize a window without
decoration.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Cleanup naming and docs, add missing migration guide after #15591
All text root nodes now use `Text` (UI) / `Text2d`.
All text readers/writers use `Text<Type>Reader`/`Text<Type>Writer`
convention.
---
## Migration Guide
Doubles as #15591 migration guide.
Text bundles (`TextBundle` and `Text2dBundle`) were removed in favor of
`Text` and `Text2d`.
Shared configuration fields were replaced with `TextLayout`, `TextFont`
and `TextColor` components.
Just `TextBundle`'s additional field turned into `TextNodeFlags`
component,
while `Text2dBundle`'s additional fields turned into `TextBounds` and
`Anchor` components.
Text sections were removed in favor of hierarchy-based approach.
For root text entities with `Text` or `Text2d` components, child
entities with `TextSpan` will act as additional text sections.
To still access text spans by index, use the new `TextUiReader`,
`Text2dReader` and `TextUiWriter`, `Text2dWriter` system parameters.
# Objective
Another clippy-lint fix: the goal is so that `ci lints` actually
displays the problems that a contributor caused, and not a bunch of
existing stuff in the repo. (when run on nightly)
## Solution
This fixes all but the `clippy::needless_lifetimes` lint, which will
result in substantially more fixes and be in other PR(s). I also
explicitly allow `non_local_definitions` since it is [not working
correctly, but will be
fixed](https://github.com/rust-lang/rust/issues/131643).
A few things were manually fixed: for example, some places had an
explicitly defined `div_ceil` function that was used, which is no longer
needed since this function is stable on unsigned integers. Also, empty
lines in doc comments were handled individually.
## Testing
I ran `cargo clippy --workspace --all-targets --all-features --fix
--allow-staged` with the `clippy::needless_lifetimes` lint marked as
`allow` in `Cargo.toml` to avoid fixing that too. It now passes with all
but the listed lint.
# Objective
- closes#15866
## Solution
- Simply migrate where possible.
## Testing
- Expect that CI will do most of the work. Examples is another way of
testing this, as most of the work is in that area.
---
## Notes
For now, this PR doesn't migrate `QueryState::single` and friends as for
now, this look like another issue. So for example, QueryBuilders that
used single or `World::query` that used single wasn't migrated. If there
is a easy way to migrate those, please let me know.
Most of the uses of `Query::single` were removed, the only other uses
that I found was related to tests of said methods, so will probably be
removed when we remove `Query::single`.
# Objective
Currently text is recomputed unnecessarily on any changes to its color,
which is extremely expensive.
## Solution
Split up `TextStyle` into two separate components `TextFont` and
`TextColor`.
## Testing
I added this system to `many_buttons`:
```rust
fn set_text_colors_changed(mut colors: Query<&mut TextColor>) {
for mut text_color in colors.iter_mut() {
text_color.set_changed();
}
}
```
reports ~4fps on main, ~50fps with this PR.
## Migration Guide
`TextStyle` has been renamed to `TextFont` and its `color` field has
been moved to a separate component named `TextColor` which newtypes
`Color`.
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Continue migration of bevy APIs to required components, following
guidance of https://hackmd.io/@bevy/required_components/
## Solution
- Make `Sprite` require `Transform` and `Visibility` and
`SyncToRenderWorld`
- move image and texture atlas handles into `Sprite`
- deprecate `SpriteBundle`
- remove engine uses of `SpriteBundle`
## Testing
ran cargo tests on bevy_sprite and tested several sprite examples.
---
## Migration Guide
Replace all uses of `SpriteBundle` with `Sprite`. There are several new
convenience constructors: `Sprite::from_image`,
`Sprite::from_atlas_image`, `Sprite::from_color`.
WARNING: use of `Handle<Image>` and `TextureAtlas` as components on
sprite entities will NO LONGER WORK. Use the fields on `Sprite` instead.
I would have removed the `Component` impls from `TextureAtlas` and
`Handle<Image>` except it is still used within ui. We should fix this
moving forward with the migration.
Wayland only supports pre-multiplied alpha. Behavior on X11 seems
unchanged.
# Objective
- Fix#10929 on wayland.
## Solution
- Request pre-multiplied alpha.
## Testing
- Ran the example locally.
# Objective
- `bevy_render` should not depend on `bevy_winit`
- Fixes#15565
## Solution
- `bevy_render` no longer depends on `bevy_winit`
- The following is behind the `custom_cursor` feature
- Move custom cursor code from `bevy_render` to `bevy_winit` behind the
`custom_cursor` feature
- `bevy_winit` now depends on `bevy_render` (for `Image` and
`TextureFormat`)
- `bevy_winit` now depends on `bevy_asset` (for `Assets`, `Handle` and
`AssetId`)
- `bevy_winit` now depends on `bytemuck` (already in tree)
- Custom cursor code in `bevy_winit` reworked to use `AssetId` (other
than that it is taken over 1:1)
- Rework `bevy_winit` custom cursor interface visibility now that the
logic is all contained in `bevy_winit`
## Testing
- I ran the screenshot and window_settings examples
- Tested on linux wayland so far
---
## Migration Guide
`CursorIcon` and `CustomCursor` previously provided by
`bevy::render::view::cursor` is now available from `bevy::winit`.
A new feature `custom_cursor` enables this functionality (default
feature).
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
A step in the migration to required components: scenes!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2FPJtNGVMMQhyM0zIvCJSkbA):
- Deprecate `SceneBundle` and `DynamicSceneBundle`.
- Add `SceneRoot` and `DynamicSceneRoot` components, which wrap a
`Handle<Scene>` and `Handle<DynamicScene>` respectively.
## Migration Guide
Asset handles for scenes and dynamic scenes must now be wrapped in the
`SceneRoot` and `DynamicSceneRoot` components. Raw handles as components
no longer spawn scenes.
Additionally, `SceneBundle` and `DynamicSceneBundle` have been
deprecated. Instead, use the scene components directly.
Previously:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn(SceneBundle {
scene: model_scene,
transform: Transform::from_xyz(-4.0, 0.0, -3.0),
..default()
});
```
Now:
```rust
let model_scene = asset_server.load(GltfAssetLabel::Scene(0).from_asset("model.gltf"));
commands.spawn((
SceneRoot(model_scene),
Transform::from_xyz(-4.0, 0.0, -3.0),
));
```
# Objective
A big step in the migration to required components: meshes and
materials!
## Solution
As per the [selected
proposal](https://hackmd.io/@bevy/required_components/%2Fj9-PnF-2QKK0on1KQ29UWQ):
- Deprecate `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle`.
- Add `Mesh2d` and `Mesh3d` components, which wrap a `Handle<Mesh>`.
- Add `MeshMaterial2d<M: Material2d>` and `MeshMaterial3d<M: Material>`,
which wrap a `Handle<M>`.
- Meshes *without* a mesh material should be rendered with a default
material. The existence of a material is determined by
`HasMaterial2d`/`HasMaterial3d`, which is required by
`MeshMaterial2d`/`MeshMaterial3d`. This gets around problems with the
generics.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, previously nothing was rendered. Now,
it renders a white default `ColorMaterial` in 2D and a
`StandardMaterial` in 3D (this can be overridden). Below, only every
other entity has a material:
Why white? This is still open for discussion, but I think white makes
sense for a *default* material, while *invalid* asset handles pointing
to nothing should have something like a pink material to indicate that
something is broken (I don't handle that in this PR yet). This is kind
of a mix of Godot and Unity: Godot just renders a white material for
non-existent materials, while Unity renders nothing when no materials
exist, but renders pink for invalid materials. I can also change the
default material to pink if that is preferable though.
## Testing
I ran some 2D and 3D examples to test if anything changed visually. I
have not tested all examples or features yet however. If anyone wants to
test more extensively, it would be appreciated!
## Implementation Notes
- The relationship between `bevy_render` and `bevy_pbr` is weird here.
`bevy_render` needs `Mesh3d` for its own systems, but `bevy_pbr` has all
of the material logic, and `bevy_render` doesn't depend on it. I feel
like the two crates should be refactored in some way, but I think that's
out of scope for this PR.
- I didn't migrate meshlets to required components yet. That can
probably be done in a follow-up, as this is already a huge PR.
- It is becoming increasingly clear to me that we really, *really* want
to disallow raw asset handles as components. They caused me a *ton* of
headache here already, and it took me a long time to find every place
that queried for them or inserted them directly on entities, since there
were no compiler errors for it. If we don't remove the `Component`
derive, I expect raw asset handles to be a *huge* footgun for users as
we transition to wrapper components, especially as handles as components
have been the norm so far. I personally consider this to be a blocker
for 0.15: we need to migrate to wrapper components for asset handles
everywhere, and remove the `Component` derive. Also see
https://github.com/bevyengine/bevy/issues/14124.
---
## Migration Guide
Asset handles for meshes and mesh materials must now be wrapped in the
`Mesh2d` and `MeshMaterial2d` or `Mesh3d` and `MeshMaterial3d`
components for 2D and 3D respectively. Raw handles as components no
longer render meshes.
Additionally, `MaterialMesh2dBundle`, `MaterialMeshBundle`, and
`PbrBundle` have been deprecated. Instead, use the mesh and material
components directly.
Previously:
```rust
commands.spawn(MaterialMesh2dBundle {
mesh: meshes.add(Circle::new(100.0)).into(),
material: materials.add(Color::srgb(7.5, 0.0, 7.5)),
transform: Transform::from_translation(Vec3::new(-200., 0., 0.)),
..default()
});
```
Now:
```rust
commands.spawn((
Mesh2d(meshes.add(Circle::new(100.0))),
MeshMaterial2d(materials.add(Color::srgb(7.5, 0.0, 7.5))),
Transform::from_translation(Vec3::new(-200., 0., 0.)),
));
```
If the mesh material is missing, a white default material is now used.
Previously, nothing was rendered if the material was missing.
The `WithMesh2d` and `WithMesh3d` query filter type aliases have also
been removed. Simply use `With<Mesh2d>` or `With<Mesh3d>`.
---------
Co-authored-by: Tim Blackbird <justthecooldude@gmail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Another step in the migration to required components: lights!
Note that this does not include `EnvironmentMapLight` or reflection
probes yet, because their API hasn't been fully chosen yet.
## Solution
As per the [selected
proposals](https://hackmd.io/@bevy/required_components/%2FLLnzwz9XTxiD7i2jiUXkJg):
- Deprecate `PointLightBundle` in favor of the `PointLight` component
- Deprecate `SpotLightBundle` in favor of the `PointLight` component
- Deprecate `DirectionalLightBundle` in favor of the `DirectionalLight`
component
## Testing
I ran some examples with lights.
---
## Migration Guide
`PointLightBundle`, `SpotLightBundle`, and `DirectionalLightBundle` have
been deprecated. Use the `PointLight`, `SpotLight`, and
`DirectionalLight` components instead. Adding them will now insert the
other components required by them automatically.
# Objective
- Fixes#15319
- Fixes#15317
## Solution
- Updated CI task to check for _any_ `bevy_*` crates, rather than just
`bevy_internal`
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
I noticed some issues in `screenshot` example:
1. Cursor icon won't return from `SystemCursorIcon::Progress` to default
icon, even though screen shot saving is done.
2. Panics when exiting window: ``called `Result::unwrap()` on an `Err`
value:
NoEntities("bevy_ecs::query::state::QueryState<bevy_ecs::entity::Entity,
bevy_ecs::query::filter::With<bevy_window:🪟:Window>>")``
## Solution
1. Caused by cursor updating system not responding to [`CursorIcon`
component
removal](5cfcbf47ed/examples/window/screenshot.rs (L38)).
I believe it should, so change it to react to
`RemovedComponents<CursorIcon>`. (a suggestion)
2. Use `get_single` for window.
## Testing
- run screenshot example
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Rewrite screenshotting to be able to accept any `RenderTarget`.
Closes#12478
## Solution
Previously, screenshotting relied on setting a variety of state on the
requested window. When extracted, the window's `swap_chain_texture_view`
property would be swapped out with a texture_view created that frame for
the screenshot pipeline to write back to the cpu.
Besides being tightly coupled to window in a way that prevented
screenshotting other render targets, this approach had the drawback of
relying on the implicit state of `swap_chain_texture_view` being
returned from a `NormalizedRenderTarget` when view targets were
prepared. Because property is set every frame for windows, that wasn't a
problem, but poses a problem for render target images. Namely, to do the
equivalent trick, we'd have to replace the `GpuImage`'s texture view,
and somehow restore it later.
As such, this PR creates a new `prepare_view_textures` system which runs
before `prepare_view_targets` that allows a new `prepare_screenshots`
system to be sandwiched between and overwrite the render targets texture
view if a screenshot has been requested that frame for the given target.
Additionally, screenshotting itself has been changed to use a component
+ observer pattern. We now spawn a `Screenshot` component into the
world, whose lifetime is tracked with a series of marker components.
When the screenshot is read back to the CPU, we send the image over a
channel back to the main world where an observer fires on the screenshot
entity before being despawned the next frame. This allows the user to
access resources in their save callback that might be useful (e.g.
uploading the screenshot over the network, etc.).
## Testing
TODO:
- [x] Web
- [ ] Manual texture view
---
## Showcase
render to texture example:
<img
src="https://github.com/user-attachments/assets/612ac47b-8a24-4287-a745-3051837963b0"
width=200/>
web saving still works:
<img
src="https://github.com/user-attachments/assets/e2a15b17-1ff5-4006-ab2a-e5cc74888b9c"
width=200/>
## Migration Guide
`ScreenshotManager` has been removed. To take a screenshot, spawn a
`Screenshot` entity with the specified render target and provide an
observer targeting the `ScreenshotCaptured` event. See the
`window/screenshot` example to see an example.
---------
Co-authored-by: Kristoffer Søholm <k.soeholm@gmail.com>
# Objective
Make the naming of a parameter more consistent.
## Solution
- Changing the name of a parameter.
## Testing
These changes can't be tested as they are documentation based.
---
I apologize if something is wrong here, this is my first PR to bevy.
# Objective
- Add custom images as cursors
- Fixes#9557
## Solution
- Change cursor type to accommodate both native and image cursors
- I don't really like this solution because I couldn't use
`Handle<Image>` directly. I would need to import `bevy_assets` and that
causes a circular dependency. Alternatively we could use winit's
`CustomCursor` smart pointers, but that seems hard because the event
loop is needed to create those and is not easily accessable for users.
So now I need to copy around rgba buffers which is sad.
- I use a cache because especially on the web creating cursor images is
really slow
- Sorry to #14196 for yoinking, I just wanted to make a quick solution
for myself and thought that I should probably share it too.
Update:
- Now uses `Handle<Image>`, reads rgba data in `bevy_render` and uses
resources to send the data to `bevy_winit`, where the final cursors are
created.
## Testing
- Added example which works fine at least on Linux Wayland (winit side
has been tested with all platforms).
- I haven't tested if the url cursor works.
## Migration Guide
- `CursorIcon` is no longer a field in `Window`, but a separate
component can be inserted to a window entity. It has been changed to an
enum that can hold custom images in addition to system icons.
- `Cursor` is renamed to `CursorOptions` and `cursor` field of `Window`
is renamed to `cursor_options`
- `CursorIcon` is renamed to `SystemCursorIcon`
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Jan Hohenheim <jan@hohenheim.ch>
# Objective
Adds a new `Monitor` component representing a winit `MonitorHandle` that
can be used to spawn new windows and check for system monitor
information.
Closes#12955.
## Solution
For every winit event, check available monitors and spawn them into the
world as components.
## Testing
TODO:
- [x] Test plugging in and unplugging monitor during app runtime
- [x] Test spawning a window on a second monitor by entity id
- [ ] Since this touches winit, test all platforms
---
## Changelog
- Adds a new `Monitor` component that can be queried for information
about available system monitors.
## Migration Guide
- `WindowMode` variants now take a `MonitorSelection`, which can be set
to `MonitorSelection::Primary` to mirror the old behavior.
---------
Co-authored-by: Pascal Hertleif <pascal@technocreatives.com>
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Pascal Hertleif <killercup@gmail.com>
# Objective
- Continue to pare down the uses on NonSend resources in the engine. In
this case, EventLoopProxy used to be `!Sync`, but is now `Sync` in the
latest version of winit.
## Solution
- New type `EventLoopProxy` as `EventLoopProxyWrapper` to make it into a
normal resource.
- Update the `custom_user_event` example as it no longer needs to
indirectly access the `EventLoopProxy` through a static variable
anymore.
## Testing
- Ran the example. The resource exists just for users to use, so there
aren't any in engine uses for it currently.
---
## Changelog
- make EventLoopProxy into a regular resource.
## Migration Guide
`EventLoopProxy` has been renamed to `EventLoopProxyWrapper` and is now
`Send`, making it an ordinary resource.
Before:
```rust
event_loop_system(event_loop: NonSend<EventLoopProxy<MyEvent>>) {
event_loop.send_event(MyEvent);
}
```
After:
```rust
event_loop_system(event_loop: Res<EventLoopProxy<MyEvent>>) {
event_loop.send_event(MyEvent);
}
```
# Objective
- Upgrade winit to v0.30
- Fixes https://github.com/bevyengine/bevy/issues/13331
## Solution
This is a rewrite/adaptation of the new trait system described and
implemented in `winit` v0.30.
## Migration Guide
The custom UserEvent is now renamed as WakeUp, used to wake up the loop
if anything happens outside the app (a new
[custom_user_event](https://github.com/bevyengine/bevy/pull/13366/files#diff-2de8c0a8d3028d0059a3d80ae31b2bbc1cde2595ce2d317ea378fe3e0cf6ef2d)
shows this behavior.
The internal `UpdateState` has been removed and replaced internally by
the AppLifecycle. When changed, the AppLifecycle is sent as an event.
The `UpdateMode` now accepts only two values: `Continuous` and
`Reactive`, but the latter exposes 3 new properties to enable reactive
to device, user or window events. The previous `UpdateMode::Reactive` is
now equivalent to `UpdateMode::reactive()`, while
`UpdateMode::ReactiveLowPower` to `UpdateMode::reactive_low_power()`.
The `ApplicationLifecycle` has been renamed as `AppLifecycle`, and now
contains the possible values of the application state inside the event
loop:
* `Idle`: the loop has not started yet
* `Running` (previously called `Started`): the loop is running
* `WillSuspend`: the loop is going to be suspended
* `Suspended`: the loop is suspended
* `WillResume`: the loop is going to be resumed
Note: the `Resumed` state has been removed since the resumed app is just
running.
Finally, now that `winit` enables this, it extends the `WinitPlugin` to
support custom events.
## Test platforms
- [x] Windows
- [x] MacOs
- [x] Linux (x11)
- [x] Linux (Wayland)
- [x] Android
- [x] iOS
- [x] WASM/WebGPU
- [x] WASM/WebGL2
## Outstanding issues / regressions
- [ ] iOS: build failed in CI
- blocking, but may just be flakiness
- [x] Cross-platform: when the window is maximised, changes in the scale
factor don't apply, to make them apply one has to make the window
smaller again. (Re-maximising keeps the updated scale factor)
- non-blocking, but good to fix
- [ ] Android: it's pretty easy to quickly open and close the app and
then the music keeps playing when suspended.
- non-blocking but worrying
- [ ] Web: the application will hang when switching tabs
- Not new, duplicate of https://github.com/bevyengine/bevy/issues/13486
- [ ] Cross-platform?: Screenshot failure, `ERROR present_frames:
wgpu_core::present: No work has been submitted for this frame before`
taking the first screenshot, but after pressing space
- non-blocking, but good to fix
---------
Co-authored-by: François <francois.mockers@vleue.com>
# Objective
- Followup to #13548
- It added a list of all possible labels to documentation. This seems
hard to keep up and doesn't stop people from making spelling mistake
## Solution
- Add an enum that can create all the labels possible, and encourage its
use rather than manually typed labels
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
- The default font size is too small to be useful in examples or for
debug text.
- Fixes#13587
## Solution
- Updated the default font size value in `TextStyle` from 12px to 24px.
- Resorted to Text defaults in examples to use the default font size in
most of them.
## Testing
- WIP
---
## Migration Guide
- The default font size has been increased to 24px from 12px. Make sure
you set the font to the appropriate values in places you were using
`Default` text style.
## Objective
Use the "standard" text size / placement for the new text in these
examples.
Continuation of an effort started here:
https://github.com/bevyengine/bevy/pull/8478
This is definitely not comprehensive. I did the ones that were easy to
find and relatively straightforward updates. I meant to just do
`3d_shapes` and `2d_shapes`, but one thing lead to another.
## Solution
Use `font_size: 20.0`, the default (built-in) font, `Color::WHITE`
(default), and `Val::Px(12.)` from the edges of the screen.
There are a few little drive-by cleanups of defaults not being used,
etc.
## Testing
Ran the changed examples, verified that they still look reasonable.
# Objective
- Simplifies/clarifies the winit loop.
- Fixes#12612.
## Solution
The Winit loop runs following this flow:
* NewEvents
* Any number of other events, that can be 0, including RequestRedraw
* AboutToWait
Bevy also uses the UpdateMode, to define how the next loop has to run.
It can be essentially:
* Continuous, using ControlFlow::Wait for windowed apps, and
ControlFlow::Poll for windowless apps
* Reactive/ReactiveLowPower, using ControlFlow::WaitUntil with a
specific wait delay
The changes are made to follow this pattern, so that
* NewEvents define if the WaitUntil has been canceled because we
received a Winit event.
* AboutToWait:
* checks if the window has to be redrawn
* otherwise calls app.update() if the WaitUntil timeout has elapsed
* updates the ControlFlow accordingly
To make the code more logical:
* AboutToWait checks if any Bevy's RequestRedraw event has been emitted
* create_windows is run every cycle, at the beginning of the loop
* the ActiveState (that could be renamed ActivityState) is updated in
AboutToWait, symmetrically for WillSuspend/WillResume
* the AppExit events are checked every loop cycle, to exit the app early
## Platform-specific testing
- [x] Windows
- [x] MacOs
- [x] Linux (x11)
- [x] Linux (Wayland)
- [x] Android
- [x] iOS
- [x] WASM/WebGL2 (Chrome)
- [x] WASM/WebGL2 (Firefox)
- [x] WASM/WebGL2 (Safari)
- [x] WASM/WebGpu (Chrome)
---------
Co-authored-by: François <francois.mockers@vleue.com>
# Objective
- As @james7132 said [on
Discord](https://discord.com/channels/691052431525675048/692572690833473578/1224626740773523536),
the `close_on_esc` system is forcing `bevy_window` to depend on
`bevy_input`.
- `close_on_esc` is not likely to be used in production, so it arguably
does not have a place in `bevy_window`.
## Solution
- As suggested by @afonsolage, move `close_on_esc` into
`bevy_dev_tools`.
- Add an example to the documentation too.
- Remove `bevy_window`'s dependency on `bevy_input`.
- Add `bevy_reflect`'s `smol_str` feature to `bevy_window` because it
was implicitly depended upon with `bevy_input` before it was removed.
- Remove any usage of `close_on_esc` from the examples.
- `bevy_dev_tools` is not enabled by default. I personally find it
frustrating to run examples with additional features, so I opted to
remove it entirely.
- This is up for discussion if you have an alternate solution.
---
## Changelog
- Moved `bevy_window::close_on_esc` to `bevy_dev_tools::close_on_esc`.
- Removed usage of `bevy_dev_tools::close_on_esc` from all examples.
## Migration Guide
`bevy_window::close_on_esc` has been moved to
`bevy_dev_tools::close_on_esc`. You will first need to enable
`bevy_dev_tools` as a feature in your `Cargo.toml`:
```toml
[dependencies]
bevy = { version = "0.14", features = ["bevy_dev_tools"] }
```
Finally, modify any imports to use `bevy_dev_tools` instead:
```rust
// Old:
// use bevy:🪟:close_on_esc;
// New:
use bevy::dev_tools::close_on_esc;
App::new()
.add_systems(Update, close_on_esc)
// ...
.run();
```
