# Objective
UI node Outlines are clipped using their parent's clipping rect instead
of their own.
## Solution
Clip outlines using the UI node's own clipping rect.
# Objective
Fixes https://github.com/bevyengine/bevy/issues/17111
## Solution
Move `#![warn(clippy::allow_attributes,
clippy::allow_attributes_without_reason)]` to the workspace `Cargo.toml`
## Testing
Lots of CI testing, and local testing too.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
This commit allows Bevy to use `multi_draw_indirect_count` for drawing
meshes. The `multi_draw_indirect_count` feature works just like
`multi_draw_indirect`, but it takes the number of indirect parameters
from a GPU buffer rather than specifying it on the CPU.
Currently, the CPU constructs the list of indirect draw parameters with
the instance count for each batch set to zero, uploads the resulting
buffer to the GPU, and dispatches a compute shader that bumps the
instance count for each mesh that survives culling. Unfortunately, this
is inefficient when we support `multi_draw_indirect_count`. Draw
commands corresponding to meshes for which all instances were culled
will remain present in the list when calling
`multi_draw_indirect_count`, causing overhead. Proper use of
`multi_draw_indirect_count` requires eliminating these empty draw
commands.
To address this inefficiency, this PR makes Bevy fully construct the
indirect draw commands on the GPU instead of on the CPU. Instead of
writing instance counts to the draw command buffer, the mesh
preprocessing shader now writes them to a separate *indirect metadata
buffer*. A second compute dispatch known as the *build indirect
parameters* shader runs after mesh preprocessing and converts the
indirect draw metadata into actual indirect draw commands for the GPU.
The build indirect parameters shader operates on a batch at a time,
rather than an instance at a time, and as such each thread writes only 0
or 1 indirect draw parameters, simplifying the current logic in
`mesh_preprocessing`, which currently has to have special cases for the
first mesh in each batch. The build indirect parameters shader emits
draw commands in a tightly packed manner, enabling maximally efficient
use of `multi_draw_indirect_count`.
Along the way, this patch switches mesh preprocessing to dispatch one
compute invocation per render phase per view, instead of dispatching one
compute invocation per view. This is preparation for two-phase occlusion
culling, in which we will have two mesh preprocessing stages. In that
scenario, the first mesh preprocessing stage must only process opaque
and alpha tested objects, so the work items must be separated into those
that are opaque or alpha tested and those that aren't. Thus this PR
splits out the work items into a separate buffer for each phase. As this
patch rewrites so much of the mesh preprocessing infrastructure, it was
simpler to just fold the change into this patch instead of deferring it
to the forthcoming occlusion culling PR.
Finally, this patch changes mesh preprocessing so that it runs
separately for indexed and non-indexed meshes. This is because draw
commands for indexed and non-indexed meshes have different sizes and
layouts. *The existing code is actually broken for non-indexed meshes*,
as it attempts to overlay the indirect parameters for non-indexed meshes
on top of those for indexed meshes. Consequently, right now the
parameters will be read incorrectly when multiple non-indexed meshes are
multi-drawn together. *This is a bug fix* and, as with the change to
dispatch phases separately noted above, was easiest to include in this
patch as opposed to separately.
## Migration Guide
* Systems that add custom phase items now need to populate the indirect
drawing-related buffers. See the `specialized_mesh_pipeline` example for
an example of how this is done.
We won't be able to retain render phases from frame to frame if the keys
are unstable. It's not as simple as simply keying off the main world
entity, however, because some main world entities extract to multiple
render world entities. For example, directional lights extract to
multiple shadow cascades, and point lights extract to one view per
cubemap face. Therefore, we key off a new type, `RetainedViewEntity`,
which contains the main entity plus a *subview ID*.
This is part of the preparation for retained bins.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
# Objective
PR #17225 allowed for sprite picking to be opt-in. After some
discussion, it was agreed that `PickingBehavior` should be used to
opt-in to sprite picking behavior for entities. This leads to
`PickingBehavior` having two purposes: mark an entity for use in a
backend, and describe how it should be picked. Discussion led to the
name `Pickable`making more sense (also: this is what the component was
named before upstreaming).
A follow-up pass will be made after this PR to unify backends.
## Solution
Replace all instances of `PickingBehavior` and `picking_behavior` with
`Pickable` and `pickable`, respectively.
## Testing
CI
## Migration Guide
Change all instances of `PickingBehavior` to `Pickable`.
# Objective
The `camera_entity` field on the extracted uinode structs holds the
render world entity that has the extracted camera components
corresponding to the target camera world entity. It should be renamed so
that it's clear it isn't the target camera world entity itself.
## Solution
Rename the `camera_entity` field on each of the extracted UI item
structs to `extracted_camera_entity`.
# Objective
I realized that setting these to `deny` may have been a little
aggressive - especially since we upgrade warnings to denies in CI.
## Solution
Downgrades these lints to `warn`, so that compiles can work locally. CI
will still treat these as denies.
# Objective
Many instances of `clippy::too_many_arguments` linting happen to be on
systems - functions which we don't call manually, and thus there's not
much reason to worry about the argument count.
## Solution
Allow `clippy::too_many_arguments` globally, and remove all lint
attributes related to it.
# Objective
`extract_shadows` uses the render world entity corresponding to the
extracted camera when it queries the main world for the camera to get
the viewport size for the responsive viewport coords resolution and
fails. This means that viewport coords get resolved based on a viewport
size of zero.
## Solution
Use the main world camera entity.
# Objective
In my crusade to give every lint attribute a reason, it appears I got
too complacent and copy-pasted this expect onto non-system functions.
## Solution
Fix up the reason on those non-system functions
## Testing
N/A
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_ui` in line with the new restrictions.
## Testing
`cargo clippy --tests` and `cargo test --package bevy_ui` were run, and
no errors were encountered.
# Objective
The name `DefaultCameraView` is confusing and misleading:
* It isn't the default UI camera, which is either the camera with the
`IsDefaultUiCamera` marker component or, if no such camera is found, the
camera with the highest order which has the primary window as its render
target.
* It doesn't make sense to call it a "default", every active 2d and 3d
camera is given its own `DefaultCameraView`.
* The name doesn't make it clear that it's UI specific component.
## Solution
Rename `DefaultCameraView` to `UiCameraView`, add a doc comment for it
and rename a few other fields and variables.
## Migration Guide
`DefaultCameraView` has been renamed to `UiCameraView`
# Objective
- Allow other crates to use `TextureAtlas` and friends without needing
to depend on `bevy_sprite`.
- Specifically, this allows adding `TextureAtlas` support to custom
cursors in https://github.com/bevyengine/bevy/pull/17121 by allowing
`bevy_winit` to depend on `bevy_image` instead of `bevy_sprite` which is
a [non-starter].
[non-starter]:
https://github.com/bevyengine/bevy/pull/17121#discussion_r1904955083
## Solution
- Move `TextureAtlas`, `TextureAtlasBuilder`, `TextureAtlasSources`,
`TextureAtlasLayout` and `DynamicTextureAtlasBuilder` into `bevy_image`.
- Add a new plugin to `bevy_image` named `TextureAtlasPlugin` which
allows us to register `TextureAtlas` and `TextureAtlasLayout` which was
previously done in `SpritePlugin`. Since `SpritePlugin` did the
registration previously, we just need to make it add
`TextureAtlasPlugin`.
## Testing
- CI builds it.
- I also ran multiple examples which hopefully covered any issues:
```
$ cargo run --example sprite
$ cargo run --example text
$ cargo run --example ui_texture_atlas
$ cargo run --example sprite_animation
$ cargo run --example sprite_sheet
$ cargo run --example sprite_picking
```
---
## Migration Guide
The following types have been moved from `bevy_sprite` to `bevy_image`:
`TextureAtlas`, `TextureAtlasBuilder`, `TextureAtlasSources`,
`TextureAtlasLayout` and `DynamicTextureAtlasBuilder`.
If you are using the `bevy` crate, and were importing these types
directly (e.g. before `use bevy::sprite::TextureAtlas`), be sure to
update your import paths (e.g. after `use bevy::image::TextureAtlas`)
If you are using the `bevy` prelude to import these types (e.g. `use
bevy::prelude::*`), you don't need to change anything.
If you are using the `bevy_sprite` subcrate, be sure to add `bevy_image`
as a dependency if you do not already have it, and be sure to update
your import paths.
# Objective
There is a large performance regression in the UI systems in 0.15
because the `UiChildren` and `UiRootRootNodes` system params (even with
`ghost_nodes` disabled) are really inefficient compared to regular
queries and can trigger a heap allocation with large numbers of
children.
## Solution
Replace the `UiChildren` and `UiRootRootNodes` system params with
simplified versions when the `ghost_nodes` feature is disabled.
## Testing
yellow this PR, red main
cargo run --example many_buttons --features "trace_tracy" --release
`ui_stack_system`
<img width="494" alt="stack"
src="https://github.com/user-attachments/assets/4a09485f-0ded-4e54-bd47-ffbce869051a"
/>
`ui_layout_system`
<img width="467" alt="unghosted"
src="https://github.com/user-attachments/assets/9d906b20-66b6-4257-9eef-578de1827628"
/>
`update_clipping_system`
<img width="454" alt="clipping"
src="https://github.com/user-attachments/assets/320b50e8-1a1d-423a-95a0-42799ae72fc5"
/>
# Objective
Found more excessive `DefaultUiCamera` queries outside of extraction.
The default UI camera lookup only needs to be done once. Do it first,
not per node.
---------
Co-authored-by: MichiRecRoom <1008889+LikeLakers2@users.noreply.github.com>
# Objective
In UI extraction the default UI camera is queried for every UI node. It
only needs to be retrieved once.
## Solution
Query for the default UI camera once before iterating the UI nodes.
```
cargo run --example many_buttons --release --features "trace_tracy"
```
<img width="631" alt="default-camera-extract"
src="https://github.com/user-attachments/assets/db712bce-6a0b-49a7-8e20-654baf588390"
/>
`extract_uinode_background_colors` yellow is this PR, red is main.
Bump version after release
This PR has been auto-generated
---------
Co-authored-by: Bevy Auto Releaser <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: François Mockers <mockersf@gmail.com>
# Objective
- Contributes to #11478
## Solution
- Made `bevy_utils::tracing` `doc(hidden)`
- Re-exported `tracing` from `bevy_log` for end-users
- Added `tracing` directly to crates that need it.
## Testing
- CI
---
## Migration Guide
If you were importing `tracing` via `bevy::utils::tracing`, instead use
`bevy::log::tracing`. Note that many items within `tracing` are also
directly re-exported from `bevy::log` as well, so you may only need
`bevy::log` for the most common items (e.g., `warn!`, `trace!`, etc.).
This also applies to the `log_once!` family of macros.
## Notes
- While this doesn't reduce the line-count in `bevy_utils`, it further
decouples the internal crates from `bevy_utils`, making its eventual
removal more feasible in the future.
- I have just imported `tracing` as we do for all dependencies. However,
a workspace dependency may be more appropriate for version management.
Derived `Default` for all public unit structs that already derive from
`Component`. This allows them to be used more easily as required
components.
To avoid clutter in tests/examples, only public components were
affected, but this could easily be expanded to affect all unit
components.
Fixes#17052.
# Objective
The UI debug overlay draws an outline for every UI node even if it is
invisible or clipped.
Disable debug outlines for hidden and clipped nodes by default and add
options to renable them if needed.
## Solution
* Add `show_hidden` and `show_clipped` fields to `UiDebugOptions`:
```rust
/// Show outlines for non-visible UI nodes
pub show_hidden: bool,
/// Show outlines for clipped sections of UI nodes
pub show_clipped: bool,
```
* Only extract debug outlines for hidden and clipped UI nodes if the
respective field in `UiDebugOptions` is set to `true`.
## Testing
Also added some extra features to the `testbed_ui` example that
demonstrate the new options:
cargo run --example testbed_ui --features "bevy_ui_debug"
<img width="641" alt="show-hidden-and-clipped"
src="https://github.com/user-attachments/assets/16a68600-170c-469e-a3c7-f7dae411dc40"
/>
# Objective
- Fixes https://github.com/bevyengine/bevy/issues/16556
- Closes https://github.com/bevyengine/bevy/issues/11807
## Solution
- Simplify custom projections by using a single source of truth -
`Projection`, removing all existing generic systems and types.
- Existing perspective and orthographic structs are no longer components
- I could dissolve these to simplify further, but keeping them around
was the fast way to implement this.
- Instead of generics, introduce a third variant, with a trait object.
- Do an object safety dance with an intermediate trait to allow cloning
boxed camera projections. This is a normal rust polymorphism papercut.
You can do this with a crate but a manual impl is short and sweet.
## Testing
- Added a custom projection example
---
## Showcase
- Custom projections and projection handling has been simplified.
- Projection systems are no longer generic, with the potential for many
different projection components on the same camera.
- Instead `Projection` is now the single source of truth for camera
projections, and is the only projection component.
- Custom projections are still supported, and can be constructed with
`Projection::custom()`.
## Migration Guide
- `PerspectiveProjection` and `OrthographicProjection` are no longer
components. Use `Projection` instead.
- Custom projections should no longer be inserted as a component.
Instead, simply set the custom projection as a value of `Projection`
with `Projection::custom()`.
# Objective
Remove the `atlas_scaling` field from `ExtractedUiItem::Gylphs`.
It's only ever set to `Vec2::ONE`. I don't remember why/if this field
was ever needed, maybe it was useful before the scale factor clean up.
## Migration Guide
The `atlas_scaling` field from `ExtractedUiItem::Gylphs` has been
removed. This shouldn't affect any existing code as it wasn't used for
anything.
# Objective
Fixes#16104
## Solution
I removed all instances of `:?` and put them back one by one where it
caused an error.
I removed some bevy_utils helper functions that were only used in 2
places and don't add value. See: #11478
## Testing
CI should catch the mistakes
## Migration Guide
`bevy::utils::{dbg,info,warn,error}` were removed. Use
`bevy::utils::tracing::{debug,info,warn,error}` instead.
---------
Co-authored-by: SpecificProtagonist <vincentjunge@posteo.net>
# Objective
This PR implements `FromStr` for `Val`, so developers can parse values
like `10px` and `50%`
## Testing
Added tests for this. I think they cover pretty much everything, and
it's a fairly simple unit test.
## Limitations
Currently the following float values are not parsed:
- `inf`, `-inf`, `+infinity`, `NaN`
- `2.5E10`, `2.5e10`, `2.5E-10`
For my use case this is perfectly fine but other developers might want
to support these values
# Objective
Some types like `RenderEntity` and `MainEntity` are just wrappers around
`Entity`, so they should be able to implement
`EntityBorrow`/`TrustedEntityBorrow`. This allows using them with
`EntitySet` functionality.
The `EntityRef` family are more than direct wrappers around `Entity`,
but can still benefit from being unique in a collection.
## Solution
Implement `EntityBorrow` and `TrustedEntityBorrow` for simple `Entity`
newtypes and `EntityRef` types.
These impls are an explicit decision to have the `EntityRef` types
compare like just `Entity`.
`EntityWorldMut` is omitted from this impl, because it explicitly
contains a `&mut World` as well, and we do not ever use more than one at
a time.
Add `EntityBorrow` to the `bevy_ecs` prelude.
## Migration Guide
`NormalizedWindowRef::entity` has been replaced with an
`EntityBorrow::entity` impl.
# Objective
Allow users to enable or disable layout rounding for specific UI nodes
and their descendants.
Fixes#16731
## Solution
New component `LayoutConfig` that can be added to any UiNode entity.
Setting the `use_rounding` field of `LayoutConfig` determines if the
Node and its descendants should be given rounded or unrounded
coordinates.
## Testing
Not tested this extensively but it seems to work and it's not very
complicated.
This really basic test app returns fractional coords:
```rust
use bevy::prelude::*;
fn main() {
App::new()
.add_plugins(DefaultPlugins)
.add_systems(Startup, setup)
.add_systems(Update, report)
.run();
}
fn setup(mut commands: Commands) {
commands.spawn(Camera2d);
commands.spawn((
Node {
left: Val::Px(0.1),
width: Val::Px(100.1),
height: Val::Px(100.1),
..Default::default()
},
LayoutConfig { use_rounding: false },
));
}
fn report(node: Query<(Ref<ComputedNode>, &GlobalTransform)>) {
for (c, g) in node.iter() {
if c.is_changed() {
println!("{:#?}", c);
println!("position = {:?}", g.to_scale_rotation_translation().2);
}
}
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: UkoeHB <37489173+UkoeHB@users.noreply.github.com>
# Objective
When preparing `GpuImage`s, we currently discard the
`depth_or_array_layers` of the `Image`'s size by converting it into a
`UVec2`.
Fixes#16715.
## Solution
Change `GpuImage::size` to `Extent3d`, and just pass that through when
creating `GpuImage`s.
Also copy the `aspect_ratio`, and `size` (now `size_2d` for
disambiguation from the field) functions from `Image` to `GpuImage` for
ease of use with 2D textures.
I originally copied all size-related functions (like `width`, and
`height`), but i think they are unnecessary considering how visible the
`size` field on `GpuImage` is compared to `Image`.
## Testing
Tested via `cargo r -p ci` for everything except docs, when generating
docs it keeps spitting out a ton of
```
error[E0554]: `#![feature]` may not be used on the stable release channel
--> crates/bevy_dylib/src/lib.rs:1:21
|
1 | #![cfg_attr(docsrs, feature(doc_auto_cfg))]
|
```
Not sure why this is happening, but it also happens without my changes,
so it's almost certainly some strange issue specific to my machine.
## Migration Guide
- `GpuImage::size` is now an `Extent3d`. To easily get 2D size, use
`size_2d()`.
Currently, `check_visibility` is parameterized over a query filter that
specifies the type of potentially-visible object. This has the
unfortunate side effect that we need a separate system,
`mark_view_visibility_as_changed_if_necessary`, to trigger view
visibility change detection. That system is quite slow because it must
iterate sequentially over all entities in the scene.
This PR moves the query filter from `check_visibility` to a new
component, `VisibilityClass`. `VisibilityClass` stores a list of type
IDs, each corresponding to one of the query filters we used to use.
Because `check_visibility` is no longer specialized to the query filter
at the type level, Bevy now only needs to invoke it once, leading to
better performance as `check_visibility` can do change detection on the
fly rather than delegating it to a separate system.
This commit also has ergonomic improvements, as there's no need for
applications that want to add their own custom renderable components to
add specializations of the `check_visibility` system to the schedule.
Instead, they only need to ensure that the `ViewVisibility` component is
properly kept up to date. The recommended way to do this, and the way
that's demonstrated in the `custom_phase_item` and
`specialized_mesh_pipeline` examples, is to make `ViewVisibility` a
required component and to add the type ID to it in a component add hook.
This patch does this for `Mesh3d`, `Mesh2d`, `Sprite`, `Light`, and
`Node`, which means that most app code doesn't need to change at all.
Note that, although this patch has a large impact on the performance of
visibility determination, it doesn't actually improve the end-to-end
frame time of `many_cubes`. That's because the render world was already
effectively hiding the latency from
`mark_view_visibility_as_changed_if_necessary`. This patch is, however,
necessary for *further* improvements to `many_cubes` performance.
`many_cubes` trace before:
`many_cubes` trace after:
## Migration Guide
* `check_visibility` no longer takes a `QueryFilter`, and there's no
need to add it manually to your app schedule anymore for custom
rendering items. Instead, entities with custom renderable components
should add the appropriate type IDs to `VisibilityClass`. See
`custom_phase_item` for an example.
# Objective
- Enable modifying node size after layout.
- Gain access to a node's content_size. `UiSurface` is a private type so
content size can't be looked up.
## Solution
- Make `ComputedNode` fields public.
- Add `content_size` to `ComputedNode`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Scroll position uses physical coordinates. This means scrolling may go
faster or slower depending on the scroll factor. Also the scrolled
position will change when the scale factor changes.
## Solution
In `ui_layout_system` convert `max_possible_offset` to logical
coordinates before clamping the scroll position. Then convert the
clamped scroll position to physical coordinates before propagating it to
the node's children.
## Testing
Look at the `scroll` example. On main if you change your display's scale
factor the items displayed by the scrolling lists will change because
`ScrollPosition`'s displacement values don't respect scale factor. With
this PR the displacement will be scaled too, and the won't move.
# Objective
We were waiting for 1.83 to address most of these, due to a bug with
`missing_docs` and `expect`. Relates to, but does not entirely complete,
#15059.
## Solution
- Upgrade to 1.83
- Switch `allow(missing_docs)` to `expect(missing_docs)`
- Remove a few now-unused `allow`s along the way, or convert to `expect`
# Objective
Fixes#16659
## Solution
- I just added all the `#[reflect(Component)]` attributes where
necessary.
## Testing
I wrote a small program that scans the bevy code for all structs and
enums that derive `Component` and `Reflect`, but don't have the
attribute `#[reflect(Component)]`.
I don't know if this testing program should be part of the testing suite
of bevy. It takes a bit of time to scan the whole codebase. In any case,
I've published it [here](https://github.com/anlumo/bevy-reflect-check).
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Destructuring in const code blocks isn't allowed, thus using UIRect in
const code can be a hassle as it initialisation function aren't const.
This Pr makes them const.
## Solution
Removed all destructuring in the UIRect implementation
## Testing
- I've ran a few ui examples to check if i didn't make a mistake,
---
# Objective
Fixes#16771
## Solution
Fixed typo in code.
## Testing
- Did you test these changes? If so, how?
I tested on my own example, that I included in the issue. It was
behaving as I expected.
Here is the screenshot after fix, the screenshot before the fix can be
found in the issue.
# Objective
The doc comments and function namings for `BorderRect` feel imprecise to
me. Particularly the `square` function which is used to define a uniform
`BorderRect` with equal widths on each edge. But this is potentially
confusing since this "square" border could be around an oblong shape.
Using "padding" to refer to the border extents seems undesirable too
since "padding" is typically used to refer to the area between border
and content, not the border itself.
## Solution
* Rename `square` to `all` (this matches the name of the similar method
on `UiRect`).
* Rename `rectangle` to `axes` (this matches the name of the similar
method on `UiRect`).
* Update doc comments.
## Migration Guide
The `square` and `rectangle` functions belonging to `BorderRect` have
been renamed to `all` and `axes`.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
- Register `BoxShadow` type for reflection
## Testing
- Tested that box shadow example compiles and runs
## Additional
- It would be nice to have this in 0.15.1
# Objective
Draw the UI debug overlay using the UI renderer.
Significantly simpler and easier to use than
`bevy_dev_tools::ui_debug_overlay` which uses `bevy_gizmos`.
* Supports multiple windows and UI rendered to texture.
* Draws rounded debug rects for rounded UI nodes.
Fixes#16666
## Solution
Removed the `ui_debug_overlay` module from `bevy_dev_tools`.
Added a `bevy_ui_debug` feature gate.
Draw the UI debug overlay using the UI renderer.
Adds a new module `bevy_ui::render::debug_overlay`.
The debug overlay extraction function queries for the existing UI layout
and then adds a border around each UI node with `u32::MAX / 2` added to
each stack index so it's drawn on top.
There is a `UiDebugOptions` resource that can be used to enable or
disable the debug overlay and set the line width.
## Testing
The `testbed_ui` example has been changed to use the new debug overlay:
```
cargo run --example testbed_ui --features bevy_ui_debug
```
Press Space to toggle the debug overlay on and off.
---
## Showcase
<img width="961" alt="testbed-ui-new-debug"
src="https://github.com/user-attachments/assets/e9523d18-39ae-46a8-adbe-7d3f3ab8e951">
## Migration Guide
The `ui_debug_overlay` module has been removed from `bevy_dev_tools`.
There is a new debug overlay implemented using the `bevy_ui` renderer.
To use it, enable the `bevy_ui_debug` feature and set the `enable` field
of the `UiDebugOptions` resource to `true`.
Updating dependencies; adopted version of #15696. (Supercedes #15696.)
Long answer: hashbrown is no longer using ahash by default, meaning that
we can't use the default-hasher methods with ahasher. So, we have to use
the longer-winded versions instead. This takes the opportunity to also
switch our default hasher as well, but without actually enabling the
default-hasher feature for hashbrown, meaning that we'll be able to
change our hasher more easily at the cost of all of these method calls
being obnoxious forever.
One large change from 0.15 is that `insert_unique_unchecked` is now
`unsafe`, and for cases where unsafe code was denied at the crate level,
I replaced it with `insert`.
## Migration Guide
`bevy_utils` has updated its version of `hashbrown` to 0.15 and now
defaults to `foldhash` instead of `ahash`. This means that if you've
hard-coded your hasher to `bevy_utils::AHasher` or separately used the
`ahash` crate in your code, you may need to switch to `foldhash` to
ensure that everything works like it does in Bevy.
# Objective
- Fixes#16497
- This is my first PR, so I'm still learning to contribute to the
project
## Solution
- Added struct `UnregisterSystemCached` and function
`unregister_system_cached`
- renamed `World::run_system_with_input` to `run_system_with`
- reordered input parameters for `World::run_system_once_with`
## Testing
- Added a crude test which registers a system via
`World::register_system_cached`, and removes it via
`Command::unregister_system_cached`.
## Migration Guide
- Change all occurrences of `World::run_system_with_input` to
`World::run_system_with`.
- swap the order of input parameters for `World::run_system_once_with`
such that the system comes before the input.
---------
Co-authored-by: Paul Mattern <mail@paulmattern.dev>
# Objective
Fixes#16610, related to #16702
## Solution
Upgrade typos and its configuration
## Testing
- Did you test these changes? If so, how? No
- Are there any parts that need more testing? No
- How can other people (reviewers) test your changes? Is there anything
specific they need to know? No
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test? Not applicable
# Objective
Fixes typos in bevy project, following suggestion in
https://github.com/bevyengine/bevy-website/pull/1912#pullrequestreview-2483499337
## Solution
I used https://github.com/crate-ci/typos to find them.
I included only the ones that feel undebatable too me, but I am not in
game engine so maybe some terms are expected.
I left out the following typos:
- `reparametrize` => `reparameterize`: There are a lot of occurences, I
believe this was expected
- `semicircles` => `hemicircles`: 2 occurences, may mean something
specific in geometry
- `invertation` => `inversion`: may mean something specific
- `unparented` => `parentless`: may mean something specific
- `metalness` => `metallicity`: may mean something specific
## Testing
- Did you test these changes? If so, how? I did not test the changes,
most changes are related to raw text. I expect the others to be tested
by the CI.
- Are there any parts that need more testing? I do not think
- How can other people (reviewers) test your changes? Is there anything
specific they need to know? To me there is nothing to test
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
---
## Migration Guide
> This section is optional. If there are no breaking changes, you can
delete this section.
(kept in case I include the `reparameterize` change here)
- If this PR is a breaking change (relative to the last release of
Bevy), describe how a user might need to migrate their code to support
these changes
- Simply adding new functionality is not a breaking change.
- Fixing behavior that was definitely a bug, rather than a questionable
design choice is not a breaking change.
## Questions
- [x] Should I include the above typos? No
(https://github.com/bevyengine/bevy/pull/16702#issuecomment-2525271152)
- [ ] Should I add `typos` to the CI? (I will check how to configure it
properly)
This project looks awesome, I really enjoy reading the progress made,
thanks to everyone involved.
This commit adds support for *multidraw*, which is a feature that allows
multiple meshes to be drawn in a single drawcall. `wgpu` currently
implements multidraw on Vulkan, so this feature is only enabled there.
Multiple meshes can be drawn at once if they're in the same vertex and
index buffers and are otherwise placed in the same bin. (Thus, for
example, at present the materials and textures must be identical, but
see #16368.) Multidraw is a significant performance improvement during
the draw phase because it reduces the number of rebindings, as well as
the number of drawcalls.
This feature is currently only enabled when GPU culling is used: i.e.
when `GpuCulling` is present on a camera. Therefore, if you run for
example `scene_viewer`, you will not see any performance improvements,
because `scene_viewer` doesn't add the `GpuCulling` component to its
camera.
Additionally, the multidraw feature is only implemented for opaque 3D
meshes and not for shadows or 2D meshes. I plan to make GPU culling the
default and to extend the feature to shadows in the future. Also, in the
future I suspect that polyfilling multidraw on APIs that don't support
it will be fruitful, as even without driver-level support use of
multidraw allows us to avoid expensive `wgpu` rebindings.
