# Objective
I have an application where I'd like to measure average frame rate over
the entire life of the application, and it would be handy if I could
just configure this on the existing `FrameTimeDiagnosticsPlugin`.
Probably fixes#10948?
## Solution
Add `max_history_length` to `FrameTimeDiagnosticsPlugin`, and because
`smoothing_factor` seems to be based on history length, add that too.
## Discussion
I'm not totally sure that `DEFAULT_MAX_HISTORY_LENGTH` is a great
default for `FrameTimeDiagnosticsPlugin` (or any diagnostic?). That's
1/3 of a second at typical game frame rates. Moreover, the default print
interval for `LogDiagnosticsPlugin` is 1 second. So when the two are
combined, you are printing the average over the last third of the
duration between now and the previous print, which seems a bit wonky.
(related: #11429)
I'm pretty sure this default value discussed and the current value
wasn't totally arbitrary though.
Maybe it would be nice for `Diagnostic` to have a
`with_max_history_length_and_also_calculate_a_good_default_smoothing_factor`
method? And then make an explicit smoothing factor in
`FrameTimeDiagnosticsPlugin` optional?
Or add a `new(max_history_length: usize)` method to
`FrameTimeDiagnosticsPlugin` that sets a reasonable default
`smoothing_factor`? edit: This one seems like a no-brainer, doing it.
## Alternatives
It's really easy to roll your own `FrameTimeDiagnosticsPlugin`, but that
might not be super interoperable with, for example, third party FPS
overlays. Still, might be the right call.
## Testing
`cargo run --example many_sprites` (modified to use a custom
`max_history_length`)
## Migration Guide
`FrameTimeDiagnosticsPlugin` now contains two fields. Use
`FrameTimeDiagnosticsPlugin::default()` to match Bevy's previous
behavior or, for example, `FrameTimeDiagnosticsPlugin::new(60)` to
configure it.
# Objective
- Closes https://github.com/bevyengine/bevy/issues/14322.
## Solution
- Implement fast 4-sample bicubic filtering based on this shader toy
https://www.shadertoy.com/view/4df3Dn, with a small speedup from a ghost
of tushima presentation.
## Testing
- Did you test these changes? If so, how?
- Ran on lightmapped example. Practically no difference in that scene.
- Are there any parts that need more testing?
- Lightmapping a better scene.
## Changelog
- Lightmaps now have a higher quality bicubic sampling method (off by
default).
---------
Co-authored-by: Patrick Walton <pcwalton@mimiga.net>
- `Once` renamed to `Warn`.
- `param_warn_once()` renamed to `warn_param_missing()`.
- `never_param_warn()` renamed to `ignore_param_missing()`.
Also includes changes to the documentation of the above methods.
Fixes#17262.
## Migration Guide
- `ParamWarnPolicy::Once` has been renamed to `ParamWarnPolicy::Warn`.
- `ParamWarnPolicy::param_warn_once` has been renamed to
`ParamWarnPolicy::warn_param_missing`.
- `ParamWarnPolicy::never_param_warn` has been renamed to
`ParamWarnPolicy::ignore_param_missing`.
# Objective
With the `track_location` feature, the error message of trying to
acquire an entity that was despawned pointed to the wrong line if the
entity index has been reused.
## Showcase
```rust
use bevy_ecs::prelude::*;
fn main() {
let mut world = World::new();
let e = world.spawn_empty().id();
world.despawn(e);
world.flush();
let _ = world.spawn_empty();
world.entity(e);
}
```
Old message:
```
Entity 0v1 was despawned by src/main.rs:8:19
```
New message:
```
Entity 0v1 does not exist (its index has been reused)
```
# Objective
PR #17225 allowed for sprite picking to be opt-in. After some
discussion, it was agreed that `PickingBehavior` should be used to
opt-in to sprite picking behavior for entities. This leads to
`PickingBehavior` having two purposes: mark an entity for use in a
backend, and describe how it should be picked. Discussion led to the
name `Pickable`making more sense (also: this is what the component was
named before upstreaming).
A follow-up pass will be made after this PR to unify backends.
## Solution
Replace all instances of `PickingBehavior` and `picking_behavior` with
`Pickable` and `pickable`, respectively.
## Testing
CI
## Migration Guide
Change all instances of `PickingBehavior` to `Pickable`.
# Objective
The `camera_entity` field on the extracted uinode structs holds the
render world entity that has the extracted camera components
corresponding to the target camera world entity. It should be renamed so
that it's clear it isn't the target camera world entity itself.
## Solution
Rename the `camera_entity` field on each of the extracted UI item
structs to `extracted_camera_entity`.
# Objective
I realized that setting these to `deny` may have been a little
aggressive - especially since we upgrade warnings to denies in CI.
## Solution
Downgrades these lints to `warn`, so that compiles can work locally. CI
will still treat these as denies.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_picking` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_picking` was run,
and no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_remote` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_remote` was run, and
no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_utils` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_utils` was run, and
no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_internal` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_internal` was run,
and no errors were encountered.
# Objective
Fixes#16783
## Solution
Works around a `cosmic-text` bug or limitation by triggering a re-layout
with the calculated width from the first layout run. See linked issue.
Credit to @ickshonpe for the clever solution.
## Performance
This has a significant performance impact only on unbounded text that
are not `JustifyText::Left`, which is still a bit of a bummer because
text2d performance in 0.15.1 is already not great. But this seems better
than alignment not working.
||many_text2d nfc re|many_text2d nfc re center|
|-|-|-|
|unbounded-layout-no-fix|3.06|3.10|
|unbounded-layout-fix|3.05 ⬜ -0.2%|2.71 🟥 -12.5%|
## Testing
I added a centered text to the `text2d` example.
`cargo run --example text2d`
We should look at other text examples and stress tests. I haven't tested
as thoroughly as I would like, so help testing that this doesn't break
something in UI would be appreciated.
# Objective
The order of the border edges in `UiVertexOutput` is left, right, top,
bottom but in `custom_ui_material` the selectors switch them so left is
right and top is bottom.
## Solution
Reverse the conditions so that the correct border values are selected.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_image` in line with the new restrictions.
## Testing
`cargo clippy --tests --package bevy_image` was run, and no errors were
encountered.
I could not run the above command with `--all-features` due to some
compilation errors with `bevy_core_pipeline` and `bevy_math` - but
hopefully CI catches anything I missed.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
- Fixes#17287
## Solution
- Added a dummy `LocalExecutor` (un)implementation to suppress
irrelevant errors.
- Added explicit `compiler_error!` when _not_ selecting either the
`async_executor` or `edge_executor` features
## Testing
- CI
# Objective
`bevy_image` appears to expect `bevy_math` to have reflection enabled.
If you attempt to build `bevy_image` without another dependency enabling
the `bevy_math/bevy_reflect` feature, then `bevy_image` will fail to
compile.
## Solution
Ideally, `bevy_image` would feature-gate all of its reflection behind a
new feature. However, for the sake of getting compilation fixed
immediately, I'm opting to specify the `bevy_math/bevy_reflect` feature
in `bevy_image`'s `Cargo.toml`.
Perhaps an upcoming PR can remove the forced `bevy_math/bevy_reflect`
feature, in favor of feature-gating `bevy_image`'s reflecton.
## Testing
`cargo clippy --package bevy_image` was ran, and no longer returns the
compilation errors that it did before.
# Objective
Stumbled upon a `from <-> form` transposition while reviewing a PR,
thought it was interesting, and went down a bit of a rabbit hole.
## Solution
Fix em
# Objective
`bevy_remote`'s reflection deserialization basically requires
`ReflectDeserialize` registrations in order to work correctly. In the
context of `bevy` (the library), this means that using `bevy_remote`
without using the `serialize` feature is a footgun, since
`#[reflect(Serialize)]` etc. are gated behind this feature.
The goal of this PR is to avoid this mistake by default.
## Solution
Make the `bevy_remote` feature enable the `serialize` feature, so that
it works as expected.
---
## Migration Guide
The `bevy_remote` feature of `bevy` now enables the `serialize` feature
automatically. If you wish to use `bevy_remote` without enabling the
`serialize` feature for Bevy subcrates, you must import `bevy_remote` on
its own.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_state` in line with the new restrictions.
## Testing
Rust-analyzer did not return any errors once the deny was added.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_scene` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_scene` was run, and
no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_pbr` in line with the new restrictions.
## Testing
`cargo clippy --tests --package bevy_pbr` was run, and no errors were
encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_gltf` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_gltf` was run, and
no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_text` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_text` was run, and
no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_transform` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_transform` was run,
and no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_hierarchy` in line with the new restrictions.
## Testing
Rust-analyzer did not discern any errors.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_gizmos` in line with the new restrictions.
## Testing
`cargo clippy --tests --all-features --package bevy_gizmos` was run, and
no errors were encountered.
# Objective
Both `set_metrics` and `set_size` **can** trigger text re-layout and
re-shaping, if the values provided are different form what is already in
the `Buffer`.
## Solution
Combine the `set_metrics` and `set_size` calls.
This might be a small optimization in some situations, maybe when both
font size and text bounds change in the same frame, or when spawning new
text.
I did measure a ~500 microsecond improvement in `text_system` for
`many_buttons --respawn`, but that may have just been noise.
# Objective
Rework / build on #17043 to simplify the implementation. #17043 should
be merged first, and the diff from this PR will get much nicer after it
is merged (this PR is net negative LOC).
## Solution
1. Command and EntityCommand have been vastly simplified. No more marker
components. Just one function.
2. Command and EntityCommand are now generic on the return type. This
enables result-less commands to exist, and allows us to statically
distinguish between fallible and infallible commands, which allows us to
skip the "error handling overhead" for cases that don't need it.
3. There are now only two command queue variants: `queue` and
`queue_fallible`. `queue` accepts commands with no return type.
`queue_fallible` accepts commands that return a Result (specifically,
one that returns an error that can convert to
`bevy_ecs::result::Error`).
4. I've added the concept of the "default error handler", which is used
by `queue_fallible`. This is a simple direct call to the `panic()` error
handler by default. Users that want to override this can enable the
`configurable_error_handler` cargo feature, then initialize the
GLOBAL_ERROR_HANDLER value on startup. This is behind a flag because
there might be minor overhead with `OnceLock` and I'm guessing this will
be a niche feature. We can also do perf testing with OnceLock if someone
really wants it to be used unconditionally, but I don't personally feel
the need to do that.
5. I removed the "temporary error handler" on Commands (and all code
associated with it). It added more branching, made Commands bigger /
more expensive to initialize (note that we construct it at high
frequencies / treat it like a pointer type), made the code harder to
follow, and introduced a bunch of additional functions. We instead rely
on the new default error handler used in `queue_fallible` for most
things. In the event that a custom handler is required,
`handle_error_with` can be used.
6. EntityCommand now _only_ supports functions that take
`EntityWorldMut` (and all existing entity commands have been ported).
Removing the marker component from EntityCommand hinged on this change,
but I strongly believe this is for the best anyway, as this sets the
stage for more efficient batched entity commands.
7. I added `EntityWorldMut::resource` and the other variants for more
ergonomic resource access on `EntityWorldMut` (removes the need for
entity.world_scope, which also incurs entity-lookup overhead).
## Open Questions
1. I believe we could merge `queue` and `queue_fallible` into a single
`queue` which accepts both fallible and infallible commands (via the
introduction of a `QueueCommand` trait). Is this desirable?
# Objective
Gamepad / directional navigation needs an example, for both teaching and
testing purposes.
## Solution
- Add a simple grid-based example.
- Fix an intermittent panic caused by a race condition with bevy_a11y
- Clean up small issues noticed in bevy_input_focus
## To do: this PR
- [x] figure out why "enter" isn't doing anything
- [x] change button color on interaction rather than printing
- [x] add on-screen directions
- [x] move to an asymmetric grid to catch bugs
- [x] ~~fix colors not resetting on button press~~ lol this is mostly
just a problem with hacking `Interaction` for this
- [x] swap to using observers + bubbling, rather than `Interaction`
## To do: future work
- when I increase the button size, such that there is no line break, the
text on the buttons is no longer centered :( EDIT: this is
https://github.com/bevyengine/bevy/issues/16783
- add gamepad stick navigation
- add tools to find the nearest populated quadrant to make diagonal
inputs work
- add a `add_edges` method to `DirectionalNavigationMap`
- add a `add_grid` method to `DirectionalNavigationMap`
- make the example's layout more complex and realistic
- add tools to automatically generate this list
- add button shake on failed navigation rather than printing an error
- make Pressed events easier to mock: default fields, PointerId::Focus
## Testing
`cargo run --example directional_navigation`
---------
Co-authored-by: Rob Parrett <robparrett@gmail.com>
# Objective
Fixes#16903.
## Solution
- Make sprite picking opt-in by requiring a new `SpritePickingCamera`
component for cameras and usage of a new `Pickable` component for
entities.
- Update the `sprite_picking` example to reflect these changes.
- Some reflection cleanup (I hope that's ok).
## Testing
Ran the `sprite_picking` example
## Open Questions
<del>
<ul>
<li>Is the name `SpritePickable` appropriate?</li>
<li>Should `SpritePickable` be in `bevy_sprite::prelude?</li>
</ul>
</del>
## Migration Guide
The sprite picking backend is now strictly opt-in using the
`SpritePickingCamera` and `Pickable` components. You should add the
`Pickable` component any entities that you want sprite picking to be
enabled for, and mark their respective cameras with
`SpritePickingCamera`.
# Objective
- Shrink `bevy_utils` more.
- Refs #11478
## Solution
- Removes `assert_object_safe` from `bevy_utils` by using a compile time
check instead.
## Testing
- CI.
---
## Migration Guide
`assert_object_safe` is no longer exported by `bevy_utils`. Instead, you
can write a compile time check that your trait is "dyn compatible":
```rust
/// Assert MyTrait is dyn compatible
const _: Option<Box<dyn MyTrait>> = None;
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Many instances of `clippy::too_many_arguments` linting happen to be on
systems - functions which we don't call manually, and thus there's not
much reason to worry about the argument count.
## Solution
Allow `clippy::too_many_arguments` globally, and remove all lint
attributes related to it.
# Objective
Fixed the issue where DragStart was triggered even when there was no
movement
https://github.com/bevyengine/bevy/issues/17230
## Solution
- When position delta is zero, don't trigger DragStart events, DragStart
is not triggered, so DragEnd is not triggered either. Everything is
fine.
## Testing
- tested with the code from the issue
---
## Migration Guide
> Fix the missing part of Drag
https://github.com/bevyengine/bevy/pull/16950
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_time` in line with the new restrictions.
No code changes have been made - except if a lint that was previously
`allow(...)`'d could be removed via small code changes. For example,
`unused_variables` can be handled by adding a `_` to the beginning of a
field's name.
## Testing
`cargo clippy`, `cargo clippy --package bevy_time` and `cargo test
--package bevy_time` were run, and no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_mesh` in line with the new restrictions.
## Testing
`cargo clippy --tests` and `cargo test --package bevy_mesh` were run,
and no errors were encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_winit` in line with the new restrictions.
## Testing
`cargo clippy --tests` was run, and no errors were encountered.
---------
Co-authored-by: Benjamin Brienen <benjamin.brienen@outlook.com>
# Objective
`extract_shadows` uses the render world entity corresponding to the
extracted camera when it queries the main world for the camera to get
the viewport size for the responsive viewport coords resolution and
fails. This means that viewport coords get resolved based on a viewport
size of zero.
## Solution
Use the main world camera entity.
This also includes suggestions and an example on how to limit the loop
speed.
Fixes#17147.
---------
Co-authored-by: François Mockers <francois.mockers@vleue.com>
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_log` in line with the new restrictions.
## Testing
`cargo clippy --tests --package bevy_log` was run, and no errors were
encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_gilrs` in line with the new restrictions.
## Testing
`cargo clippy --tests --package bevy_gilrs` was run, and no errors were
encountered.
# Objective
I never realized `clippy::type_complexity` was an allowed lint - I've
been assuming it'd generate a warning when performing my linting PRs.
## Solution
Removes any instances of `#[allow(clippy::type_complexity)]` and
`#[expect(clippy::type_complexity)]`
## Testing
`cargo clippy` ran without errors or warnings.
# Objective
In my crusade to give every lint attribute a reason, it appears I got
too complacent and copy-pasted this expect onto non-system functions.
## Solution
Fix up the reason on those non-system functions
## Testing
N/A
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_input` in line with the new restrictions.
## Testing
`cargo clippy --tests --package bevy_input` was run, and no errors were
encountered.
# Objective
- https://github.com/bevyengine/bevy/issues/17111
## Solution
Set the `clippy::allow_attributes` and
`clippy::allow_attributes_without_reason` lints to `deny`, and bring
`bevy_ui` in line with the new restrictions.
## Testing
`cargo clippy --tests` and `cargo test --package bevy_ui` were run, and
no errors were encountered.
# Objective
Allow tuple structs in the animated_field macro.
- for example `animated_field!(MyTupleStruct::0)`.
Fixes#16736
- This issue was partially fixed in #16747, where support for tuple
structs was added to `AnimatedField::new_unchecked`.
## Solution
Change the designator for `$field` in the macro from `ident` to `tt`.
## Testing
Expanded the doc test on `animated_field!` to include an example with a
tuple struct.
Fixes#17192.
Replaces "animated_fox" with "animated_mesh".
I considered a few different names - should it say "skinned_mesh" to be
precise? Should it mention gltf? But "animated_mesh" seems intuitive and
keeps it short.
## Testing
- Ran all three examples (Windows 10).
# Objective
The name `DefaultCameraView` is confusing and misleading:
* It isn't the default UI camera, which is either the camera with the
`IsDefaultUiCamera` marker component or, if no such camera is found, the
camera with the highest order which has the primary window as its render
target.
* It doesn't make sense to call it a "default", every active 2d and 3d
camera is given its own `DefaultCameraView`.
* The name doesn't make it clear that it's UI specific component.
## Solution
Rename `DefaultCameraView` to `UiCameraView`, add a doc comment for it
and rename a few other fields and variables.
## Migration Guide
`DefaultCameraView` has been renamed to `UiCameraView`
# Objective
- Commands like `cargo bench -- --save-baseline before` do not work
because the default `libtest` is intercepting Criterion-specific CLI
arguments.
- Fixes#17200.
## Solution
- Disable the default `libtest` benchmark harness for the library crate,
as per [the Criterion
book](https://bheisler.github.io/criterion.rs/book/faq.html#cargo-bench-gives-unrecognized-option-errors-for-valid-command-line-options).
## Testing
- `cargo bench -p benches -- --save-baseline before`
- You don't need to run the entire benchmarks, just make sure that they
start without any errors. :)
